Wolf WTF-42 User Manual
Item #_____________ C.S.I. Section 11420
GAS HI-PER
FLOOR MODEL FRYER
BASIC MODEL:
WTF-42 42-48 lb. capacity fryer.
FM Matching frymate
KEY FEATURES:
➤ Front and sides finished in black epoxy powder coat paint.
Stainless steel bullnose. 6" adjustable legs. 10
stub back.
➤ Twin fry baskets with plastic coated handles.
➤ 14 gauge cold rolled steel fry tank, 42 to 48 lb. capacity,
with four heat exchanger tubes and "V" shaped cold zone.
1" full port ball type drain valve.
➤ 120,000 BTU/hr. input.
➤ Pilot ignition system.
➤ Hydraulic snap acting thermostat adjusts from 200° to 400°F.
➤ Hi-limit gas shut-off.
➤ Stainless steel stub back.
1
➤
⁄2" rear gas connection with gas pressure regulator.
➤ One year limited parts and labor warranty.
1
⁄2" high
Model WTF-42 shown
with stainless steel riser
Design Certified by the American Gas Association
Listed by the National Sanitation Foundation
Approved by ______________________
Date: _____________________________
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
OPTIONAL FEATURES:
➤ Stainless steel fry tank. Includes limited 5 year part
warranty.
➤ Stainless steel door.
➤ Stainless steel body side(s).
➤ Stainless steel riser in place of stub back.
➤ Set of 4 casters (2 locking).
ACCESSORIES:
➤ Matching frymate drain cabinet.
➤ Apron type side drain board.
➤ Removable drain board basket.
DESCRIPTION:
42-48 lb. capacity floor model gas fryer, Wolf Model No.
WTF-42. Front and sides finished in black epoxy powder coat
paint. Stainless steel bullnose. 6" adjustable legs. 10
stub back. Twin fry baskets with plastic coated handles. 14 gauge
cold rolled steel fry tank with four heat exchanger tubes and
a "V" shaped cold zone. 1" full port ball type drain valve.
120,000 BTU/hr. input. Pilot ignition system. Hydraulic snap
acting thermostat adjusts from 200° to 400°F. Hi-limit gas
shut-off.
One year limited parts and labor warranty.
Exterior dimensions: 151⁄2"w x 321⁄2"d x 37" working height on
6" adjustable legs.
1
⁄2" rear gas connection with gas pressure regulator.
1
⁄2" high
MODEL: WTF-42 Hi-Per Gas Floor Model Fryer
F-39066 (5/99)
19600 S. Alameda St., Compton, CA 90221-6291
P.O. Box 7050, Compton, CA 90240-7050
(310) 637-3737 • FAX (310) 637-7931 • (800) 366-WOLF
Customer Service (888) 639-9653
Model WTF-42
Hi-Per Gas Floor Model Fryer
RISER
STUB
FRYMATE FRYER
OVERALL WORKING TANK FRY COMP. APPROX.
MODEL WIDTH DEPTH HEIGHT HEIGHT SIZE BTU/hr. CAPACITY SHP. WT.
WTF-42 15
1
⁄2"32
1
⁄2"47
1
⁄2" 37" 14" x 14" 120,000 42 lbs.
225 lbs.
101 kg.
IMPORTANT
1. A gas pressure regulator sized for this unit is included.
Natural Gas 3.5" W.C. Propane Gas 10.0" W.C.
2. Gas line connecting to appliance must be 1⁄2" or larger.
If flexible connectors are used, the inside diameter must
be the same as the
1
⁄2" iron pipe.
3. An adequate ventilation system is required for Commercial Cooking Equipment. Information may be obtained by
writing to the National Fire Protection Association,
4. These units are manufactured for installation in accordance with ANSZ223.1 (latest edition), National Fuel
Gas Code. Copies may be obtained from American Gas
Association, 1515 Wilson Blvd., Arlington, VA 22209.
5. Clearances:
Non-combustible installation only
Rear 0"
Sides 0"
Batterymarch Park, Quincy, MA 02269. When writing
refer to NFPA No. 96.
F-39066 (5/99)
NOTE: In line with its policy to continually improve its product, Wolf Range Company
reserves the right to change materials and specifications without notice.
This appliance is manufactured for commercial use only and is not intended for home use.
Loading...