WOLF WARMINGDRAWER Installation Manual
Planning Information
30" (762) Warming Drawer
MODEL WWD30 – STAINLESS STEEL DRAWER FRONT
Dimensions in parentheses are in
millimeters unless otherwise specified.
7/06
1
Model WWD30
Stainless Steel Drawer Front
Warming drawers have a clear mission in life— to
take good care of good food until it’s time for you to
eat. Our superior air control helps keep moist foods
moist and crisp foods crisp. In addition, Wolf warming
drawers are some of the most capacious on the
market, so you will have little problem storing items.
Electronic controls are hidden. You have your choice of
three stainless steel finishes for the drawer front and
handle. Choose from the classic stainless steel look or
the premium finishes of platinum or carbon stainless
steel.
The Wolf Model WWD30, 30" (762)
warming drawer is sold as a base unit
only, a drawer front accessory is required.
The stainless steel drawer front panel and
tubular handle is available in classic,
platinum or carbon stainless steel finish.
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Rack for
stacking food
Galvanized exterior
Stainless steel
drawer front
(sold as an accessory)
Ball bearing
drawer glides
Stainless steel
interior
Removable stainless
steel drawer pan
Hidden electronic
touch control panel
Location of
rating plate
Planning Information
30" (762) Warming Drawer
MODEL WWD30 – STAINLESS STEEL DRAWER FRONT
Dimensions in parentheses are in
millimeters unless otherwise specified.
Dimensions may vary by ±
1
/8" (3).
2
FEATURES
Stainless steel drawer front and tubular
handle available in classic, platinum and
carbon finishes
850-watt heating element
Hidden electronic touch control panel
Preset and variable temperature control
Preset automatic shut-off or extended
operation in Sabbath Mode
Stainless steel interior
Rack for stacking food
Removable stainless steel drawer pan
Full extension, ball bearing drawer glides
Certified by Star-K to meet religious
regulations
CSA certified for US and Canada
Two and five year residential warranty –
exclusions apply; warranty information can
be found on our website, wolfappliance.com
OVERALL DIMENSIONS
Model WWD30 with stainless steel drawer front.
271/8"
OVERALL DEPTH
101/4"
(260)
297/8"
OVERALL WIDTH
(759)
231/2"
BEHIND FRAME
(689)
(597)
9"
(229)
Planning Information
30" (762) Warming Drawer
MODEL WWD30 – STAINLESS STEEL DRAWER FRONT
3
Dimensions in parentheses are in
millimeters unless otherwise specified.
Dimensions may vary by ±
1
/8" (3).
SPECIFICATIONS
Overall Drawer Width 297/8" (759)
Overall Drawer Height 101/4" (260)
Overall Drawer Depth 271/8" (689)
Overall Depth (behind frame) 231/2" (597)
Recommended Cabinet Width 33" (838)
Minimum Cabinet Width 30" (762)
Minimum Cabinet Depth 24" (610)
Minimum Base Support 200 lbs (91 kg)
Rough Opening Width 285/8" (727)
Rough Opening Height 91/8" (232)
Rough Opening Depth 237/8" (606)
Heating Element 850 W
Electrical Supply Requirements 110/ 120 V AC, 50/ 60 Hz
15 amp dedicated circuit
Power Cord 6 ft (1.8 m) power cord with
3-prong grounded plug
Shipping Weight 100 lbs (45 kg)
Special Note Installation specifications vary
for stainless steel drawer front and
integrated drawer front applications
Specifications are subject to change without notice.
FRONT PANEL OPTIONS
Classic Stainless Steel WWDFRONT/S
Platinum Stainless Steel WWDFRONT/P
Carbon Stainless Steel WWDFRONT/B
Warming drawer is sold as a base unit
only, one of the above stainless steel
drawer front panels is required. Panels are
ordered and shipped as a sales accessory
and include a tubular handle.
ACCESSORIES
Six-piece container set with lids
and pan rack
Accessories are available through
your Wolf dealer. To obtain local dealer
information, visit the Locator section
of our website, wolfappliance.com.
Model WWD30
Stainless Steel Drawer Front
Planning Information
30" (762) Warming Drawer
MODEL WWD30 – STAINLESS STEEL DRAWER FRONT
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
INSTALLATION WITH 30" (762) BUILT-IN OVEN
UNDERCOUNTER INSTALLATION
Dimensions shown in the illustrations are for the stainless steel drawer front application.
PLATFORM APPLICATION
24"min (610)
CABINET DEPTH
7
/8"
(22)
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
273/16"
(691)
24"min
(610)
7
/8" (22)
PLATFORM
24"min (610)
CABINET DEPTH
23/8"
(60)
ANTI-TIP BLOCK APPLICATION
91/8" (232)
OPENING
HEIGHT
237/8"min (606)
OPENING DEPTH
273/16"
(691)
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
RECOMMENDED CABINET WIDTH
33" (838)
30"min (762)
281/2" (724)
30-INCH OVEN
ROUGH OPENING
5"
E
(127)
4"
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
WARMING DRAWER
(102)
285/8" (727)
OPENING WIDTH
2"(51) x 2"(51)
ANTI-TIP BLOCK
91/8" (232)
OPENING
HEIGHT
237/8" min (606)
OPENING DEPTH
24" min (610)
CABINET DEPTH
*Allow enough room for placement of anti-tip block and drawer face overlap.
DIMENSION
WILL VARY*
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
RECOMMENDED CABINET WIDTH
33" (838)
30" min (762)
4"
(102)
285/8" (727)
OPENING WIDTH
5"
(127)
E
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
Loading...