Page 1
36" Downdraft Ventilation
FEATURES
• Three-speed blower control with boost.
• Remote-mounted control module with
LED indicators.
• Delay-off feature to automatically turn
unit off.
• Stainless steel, mesh filters.
• Reversible motor box.
• Adjustable discharge.
wolfappliance.com
BLOWER OPTIONS*
MODEL DD36 CFM
Internal 600
In-line 600
Remote 600 or 1200
*Blowers sold separately.
IMPORTANT NOTE: Wolf downdrafts can
be used with all Wolf induction, electric and
gas cooktops, except unframed models.
Wolf downdrafts cannot be used with
the steamer or fryer module and are not
recommended for use with the electric grill
module.
ACCESSORIES
• Trim kit for SRT366.
• Make-up air damper.
• 8" Inline damper.
• 10" Inline damper.
Accessories avail able through an authorized
Wolf dealer. For local dealer information, visit
the find a showroom section of our website,
wolfappliance.com.
Page 2
36" Downdraft Ventilation
W
W
wolfappliance.com
SPECIFICATIONS
PRODUCT
Dimensions 36"W x 14"H x 2"D
Weight 80 lb
DISCHARGE
Internal 6" Round
In-line or Remote 10" Round
ELECTRICAL
Supply 120 VAC, 60 Hz
Service 15 amp circuit
Power Cord 4 ft
Specifications are subject to change without
notice. Visit wolfappliance.com/specs for the
most up-to-date information.
Dimensions may vary ±
1
/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.
INSTALLATION WITH COOKTOP
211/16" (68)
DIMENSIONS
36" (914)
W
DOWNDRAFT WIDTH
2"
(51)
63/4"
14"
(356)
(172)
23/8"
(60)
15"
13"
(330)
(381)
283/4"
(730)
10"
(254)
13"
(330)
321/2" (826)
A
CHIMNEY WIDTH
21/2"
(64)
NOTE: Shown with front mounted internal blower with 6" (152) round discharge,
dashed line represents rear mount.
INSTALLATION WITH SEALED BURNER RANGETOP
331/2" (851) 331/2" (851)
DOWNDRAFT
CUT-OUT WIDTH
E
81/4" (210)*
211/16" (68)
CUT-OUT WIDTH
E
DOWNDRAFT
81/4" (210)*
COOKTOP CUT-OUT
TOP VIEW
19" (483)
81/4"
(210)*
*6" (152) back from countertop cut-out when internal blower is rear mounted.
*6" (152) back from the countertop cutout when an internal blower is rear mounted. *6" (152) back from the countertop cutout when an internal blower is rear mounted.
NOTE: Internal blower 6"
Centerline indicates center of downdraft cut-out.
211/4"
(540)
(152) round, side, rear or bottom discharge. In-line and remote blower 10" (254) round, rear discharge.
211/4"
(540)
E
233/8"
(594)
FRONT VIEWSIDE VIEW
PLATFORM DEPTH
81/4"
(210)*
*6" (152) back from countertop cut-out when internal blower is rear mounted.
NOTE: Internal blower 6"
Centerline indicates center of downdraft cut-out.
211/4"
(540)
(152) round, side, rear or bottom discharge. In-line and remote blower 10" (254) round, rear discharge.
RANGETOP OPENING
TOP VIEW
211/4"
233/8"
(540)
(594)
E
FRONT VIEWSIDE VIEW
FRONT VIEWSIDE VIEW
©Wolf Appliance, Inc. all rights reserved. 11/2013
Loading...