Wolf CT36I-S User Manual
6" Framed Induction Cooktop
3
Induction cooking has been used in
Europe for decades by professionals
and homeowners demanding the best in
performance. They are 90-95% energy
efficient; as a result, no heat is wasted
because energy is supplied directly to
the cooking vessel. With Wolf’s unframed
induction cooktops there’s no stainless
steel trim, just the sophisticated,
minimalist exterior subtly patterned
design to hide any unsightly scratches.
FEATURES
• Stainless steel trim finish.
• Easy-to-clean black ceramic glass surface
is resistant to scratching, staining, impact
and heat.
• Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface.
• Five high-efficiency induction elements
deliver power and control.
• Maximum element power: 3000 W with
4000 W boost, (2) 1800 W with 3000 W
boost and (2) 1200 W.
• True simmer setting on three elements.
• Melt setting on two elements.
• Cookware sensing — elements will not be
energized without an induction-compatible
pan on the cooktop surface.
• Hi-Power mode boosts power on 1800 W
elements by diverting power from adjacent
element —4000 W element does not divert
power from adjacent element for boost.
• Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded.
• Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume.
• Hot-surface indicator light in control
panel.
• Lock mode—cooktop will be locked so
that no elements can be turned on.
• Universal OFF turns all elements off.
• Countdown timer with 1 to 99 minute
range.
ACCESSORIES
• Filler strip for installation of multiple
cooktops or modules.
Accessories are available through your authorized
Wolf dealer. For local dealer information, visit the
find a showroom section of our website,
wolfappliance.com.
HOW DOES INDUCTION
COOKING WORK?
The electricity flows through a coil to
produce a magnetic field under the ceramic
cooktop. When a cast iron or magnetic
stainless steel pan is placed on the ceramic
glass surface, currents are induced in the
cooking utensil and instant heat is generated due to the resistance of the pan.
Induction only works with cooking vessels
made of magnetic materials, such as cast
iron and magnetic stainless steel (it will not
work with aluminum or copper pots).
Hi-Power boost control.
Model CT36I/ S
36" Framed Induction Cooktop
36" (914)
21/2" (
64)
11/4" (
32)
7
/8" (22)
ALL SIDES
TERMINAL BOX
21" (533)
18" (457) min
36" (914)
FLOOR TO
COUNTERTOP
30" (762) min
C
OUNTERTOP
TO COMBUSTIBLE
M
ATERIALS
41/2"
(
114
)
10" (254)
31/2" (89)
E
SEE COUNTERTOP
CUT-OUT BELOW
343/8" (873)
CUT-OUT WIDTH
COUNTERTOP CUT-OUT
FRONT
191/4" (489)
CUT-OUT
DEPTH
21/2" (64) min
2" (
51)
TO
C
OMBUSTIBLE
*
2" (
51)
TO
C
OMBUSTIBLE
*
SIDE
CABINET
13" (330)
max
2" (51) min*
FRONT VIEWSIDE VIEW
*Minimum clearance from cooktop cut-out to com bustible materials up to 18" (457) above counter top.
NOTE: Electrical location applies only to installati on with built-in oven.
OVERALL DIMENSIONS
Unit dimensions may vary by ±1/8".
SPECIFICATIONS
Overall Width 36"
Overall Height 21/2"
Overall Depth 21"
Induction Elements Five
Countertop Cut-Out Width* 343/8"
Countertop Cut-Out Depth 191/4"
Maximum Element Power (2) 1200 W
(2) 1800 W with 3000 W boost
(1) 3000 W with 4000 W boost
Element Diameters 5
Electrical Requirements 240/208 V AC
Conduit 4' flexible 3-wire
50/ 60 Hz, 50 amp circuit
Electrical Rating 10.2 kW at 240 V AC
(2) 83/4" and 11"
8.9 kW at 208 V AC
Shipping Weight 70 lbs
*If the cooktop is to be used with any combination of additional cooktop units or modules with a
filler strip, the cut-out width increases to 35".
1
/2", 63/4",
INSTALLATION SPECIFICATIONS
INSTALLATION NOTES
Complete installation specifications can be
found on our website, wolfappliance.com.
Countertop Cut-Out Dimensions
Dimensions in parentheses are in
millimeters unless otherwise specified.
©Wolf Appliance, Inc. all rights reserved. Features and specifications are subject to ch ange at any time without notice. 12/ 11
Loading...