Page 1
lanning Information
M
E
L
T
HI
GH
OF
F
O
N
O
F
F
O
N
SI
M
H
I
G
H
HI
-
P
OW
E
R
OFF
O
C
LE
AR
P
New Integrated Induction Cooktop
— Available October 2007
MODEL CT15I/S
Two induction
elements
odel CT15I /S
M
Classic stainless
steel trim finish
Electronic
touch controls
ocation of
L
rating plate
Melt setting
ountdown
C
imer
t
Universal
FF key
O
ot-surface
H
indicator light
ock key
L
rue Simmer on
T
both elements
The Wolf Model CT15I /S 15" (381)
integrated induction cooktop is available
with classic stainless steel trim finish.
Induction cooking has been used in Europe for decades
by professionals and homeowners demanding the best in
performance.
In induction cooking, the electricity flows through a coil
to produce a magnetic field under the ceramic cooktop.
When a cast iron or magnetic stainless steel pan is
placed on the ceramic glass surface, currents are induced
in the cooking utensil and instant heat is generated due
to the resistance of the pan. Induction only works with
cooking vessels made of magnetic materials, such as
on and magnetic stainless steel (it will not work
cast ir
with aluminum or copper pots). To test the cookw
magnet must stick to the bottom of the vessel in order to
function.
Induction cooking is so efficient that it out-performs gas
and electric cooktops. There is no wasted heat because
energy is supplied directly to the cooking vessel, so
nearly 90 percent of the energy gets used to cook.
You can keep sauces and chocolates melted at 50 watts
of power, or with the touch of a finger, activate the
ower boost feature and boil w
P
-
Hi
ater in nearly half the
time you normally do.
are, a
Dimensions in parentheses are in
millimeters unless otherwise specified.
9/07
With Wolf’s integrated modules, you have the ultimate in
customization. You can create your own design by mixing
and matching the various components within this system.
The new integrated induction cooktop will be available in
October 2007 and will replace the existing model.
1
Page 2
lanning Information
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
31/2" (89)
TERMINAL BOX
41/2" (114)
P
New Integrated Induction Cooktop
MODEL CT15I/S
FEATURES
Integrated design allows for installation of
multiple cooktops or modules
Classic stainless steel trim finish
Easy-to-clean black ceramic glass surface is
resistant to scratching, staining, impact and
heat
Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface
Two high-efficiency induction elements
deliver power and control
Maximum element power: 1800 W with
3000 W boost and 1200 W
True Simmer setting on rear element
Melt setting on front element
Cookware sensing— elements will not be
energized without an induction-compatible
pan on the cooktop surface
Hi-Power mode boosts power on rear
element by diverting power from front
element
Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded
Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume
H
ot-surface indicator light in control panel
Lock mode— cooktop will be locked so that
no elements can be turned on
Universal OFF turns all elements off
Countdown timer with 1 to 99 minute r
ange
CSA certified for US and Canada
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com
OVERALL DIMENSIONS
Unit dimensions may vary by ±
Dimensions in parentheses are in
millimeters unless otherwise specified.
1
/8" (3).
2
Page 3
lanning Information
P
New Integrated Induction Cooktop
MODEL CT15I/S
SPECIFICATIONS
O
verall Cooktop Width 15" (381)
Overall Cooktop Height 31/2" (89)
Overall Cooktop Depth 21" (533)
odel CT15I /S
M
VENTILATION OPTIONS
30" (762) Cooktop hood or Pro
wall or wall chimney hood or liner
30" (762) or 45" (1143) downdraft
ventilation system
36" (914) Pro island hood
F
or additional information, refer to the
Cooktop or Pro Ventilation sections of our
website, wolfappliance.com.
Element Maximum Power 1200 W (front)
Maximum Power Output 3600 W
E
lement Diameters 6
Minimum Cabinet Depth 223/4" (578)
Minimum Height Clearance* 41/2" (114)
Cooktop Cut-Out Width 133/8" (340)
Cooktop Cut-Out Depth 191/4" (489)
Electrical Supply Requirements 240/ 208 V AC
Conduit 4 ft (1.2 m) flexible 3-wire
1800 W with 3000 W boost (rear)
3
/4"
(171) and 8
3
/4"
(220)
50/ 60 Hz, 20 amp circuit
A CCESSORIES
Filler strip
Bracket supports for installation
of two integrated modules with
downdraft (Model DD30 only)
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showr
section
our website, wolfappliance.com.
of
oom Locator
Electrical Rating 3.6 kW at 240 V
3.1 kW at 208 V
Shipping Weight 30 lbs (14 kg)
Special Note Cooktop can be installed in combination
with other cooktops or modules
*Minimum 6" (152) clearance is required between countertop and
any combustible surface directly below the cooktop.
Specifications are subject to change without notice.
Unit dimensions may vary by ±1/8" (3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
Page 4
lanning Information
E
41/2" (114)
15"
(
381)
15"
(381)
2"*min (51)
C
UT-OUT TO
COMBUSTIBLE
M
ATERIALS
(BOTH SIDES)
133/8" (340)
COOKTOP CUT-OUT
WIDTH
133/8" (340)
COOKTOP CUT-OUT
W
IDTH
33" (838)
RECOMMENDED
C
ABINET WIDTH
18"
(457)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-out
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
191/4" (489)
COOKTOP CUT-OUT
D
EPTH
21/2"min
(64)
36" (914)
S
TANDARD
FLOOR TO
COUNTERTOP
H
EIGHT
13" max
(
330)
30" (
762)
COUNTERTOP TO
COMBUSTIBLE
M
ATERIALS
ABOVE COOKTOP
FRONT OF COUNTERTOP
21/2"min
(64)
191/4" (489)
COOKTOP
CUT-OUT DEPTH
2"**
(
51)
P
New Integrated Induction Cooktop
MODEL CT15I/S
INSTALLATION SPECIFICATIONS
DIMENSIONS
Minimum Cabinet Depth 223/4" (578)
Cooktop Cut-Out Width 133/8" (340)
Cooktop Cut-Out Depth
Location of Electrical Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
Dimensions in parentheses are in
millimeters unless otherwise specified.
1
19
/4" (489)
4
Page 5
lanning Information
P
New Integrated Induction Cooktop
MODEL CT15I/S
INSTALLATION NOTES
Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
Wolf recommends using 33" (838) wide
cabinets for installation of two integrated
modules side by side. An 18" (457) wide
cabinet is recommended for installation of a
single integrated cooktop module.
IMPORTANT NOTE: Review specific installation
instructions for product to product capabilities
If the integrated induction cooktop is to be
used with any combination of additional
cooktop units or modules with a filler strip, the
cut-out width increases to 14" (356). When
multiple cooktops or modules are installed side
by side, refer to the countertop cut-out dimensions on page 6.
Clearance is required for the terminal block
located on the bottom of the cooktop in the
right rear corner.
IMPORTANT NOTE: A minimum height clearance of 6" (152) is required between the countertop and any combustible surface directly
below the cooktop. This includes upper edges
of drawers located directly below unit. If a shelf
is installed below the unit, a 1" (25) gap at the
rear of the cabinet shelf is necessary to allow
for proper ventilation. Failure to do so could
result in decreased performance or pr
damage.
oduct
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to the
v
entilation recommendation charts in the
cooktop or Pro ventilation sections of our
website, wolfappliance.com.
The Wolf integrated induction cooktop
requires a separate, grounded 3-wire 240/208 V
AC, 50/ 60 Hz, 20 amp service with its own
circuit breaker. It has a 4' (1.2 m) flexible 3-wire
conduit for connection at the electrical supply.
Locate electrical within the shaded area shown
in the illustration on page 4.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.
This cooktop is intended for indoor use only.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Page 6
lanning Information
21/2"min
(64)
FRONT OF COUNTERTOP
191/4"
(489)
CUT-OUT
DEPTH
291/4" (743)
TWO MODULES WIDTH
441/2" (1130) THREE MODULES WIDTH OR
441/4" (1124) 30" COOKTOP AND ONE MODULE
593/4" (1518) FOUR MODULES WIDTH OR
591/2" (1511) 30" COOKTOP AND TWO MODULES OR
501/4" (1276) 36" COOKTOP AND ONE MODULE
14"
(356)
CUT-OUT
WIDTH
P
New Integrated Induction Cooktop
MODEL CT15I/S
MULTIPLE COOKTOP INSTALLATION
With Wolf's integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory you and your client will
truly understand freedom of choice.
Some Wolf integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple units are installed side
by side, the cut-out dimensions that are shown
in the illustration are derived by adding 1
1
/4" (32)
additional space for each additional unit, to give
you your total cut-out width. Refer to the illustration below for countertop cut-out dimensions
for installation of multiple cooktop units.
When two or more cooktops or modules are
installed together, an accessory filler strip is
recommended. Refer to Accessories on page 3.
IMPORTANT NOTE: When multiple cooktops
and/ or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/ or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
IMPORTANT NOTE: Review specifications for
each specific integrated module for installation
requirements and limitations. Refer to the
integrated modules section of our website,
wolfappliance.com.
Countertop cut-out dimensions for installation of multiple cooktop units.
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Loading...