Page 1
Planning Information
New Integrated Electric Cooktop
— Available November 2007
MODEL CT15E/S
1
Dimensions in parentheses are in
millimeters unless otherwise specified.
3/08
Model CT15E/S
The Wolf Model CT15E/S 15" (381)
integrated electric cooktop is available
with classic stainless steel trim finish.
Behind the sophisticated, minimalist exterior, beneath
that perfectly smooth, subtly patterned glass that
cleverly reduces scratches, there is a high-performance
cooking tool.
The black ceramic glass top of the framed electric
cooktops is beautifully complemented by the classic
stainless steel trim finish.
Two cooking elements with four temperature zones
offers exceptional control of temperature for a variety
of size pans. Both heating elements offer True Simmer
along with one element that enables you to set a
temperature for melting.
With Wolf’s integrated modules, you have the ultimate
in customization. You can create your own design by
mixing and matching the various components within
this system.
The new integrated electric cooktop will be available in
November 2007 and will replace the existing model.
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Electronic
touch controls
Triple-zone
element
Location of
rating plate
Lock key
Hot-surface
indicator light
Classic stainless
steel trim finish
Universal
OFF key
Countdown
timer
True Simmer
Melt setting
HIGH
OFF ON
ZONE 2
SIM
ZONE 3
T
L
E
M
H
G
I
H
N
O
F
F
O
FF
O
R
A
E
L
C
O
Page 2
Planning Information
New Integrated Electric Cooktop
MODEL CT15E/S
2
OVERALL DIMENSIONS
Dimensions in parentheses are in
millimeters unless otherwise specified.
Unit dimensions may vary by ±
1
/8" (3).
FEATURES
Integrated design allows for installation of
multiple cooktops or modules
Classic stainless steel trim finish
Easy-to-clean black ceramic glass surface is
resistant to scratching, staining, impact and
heat— translucent surface allows you to see
the glow of hot elements
High-frequency pulsation elements improve
cooking performance and control
Two heating elements with four zones
Triple-zone element power:
900 W/ 1800 W / 2500 W (maximum)
Single element power: 1200 W (maximum)
Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded
Illuminated touch controls with graduated
control lighting
True Simmer setting on both elements
Melt setting on one element
Hot-surface indicator light in control panel
Lock mode— cooktop can be locked so that
no elements can be turned on
Universal OFF turns all elements off
Countdown timer with 1 to 99 minute range
and adjustable sound frequency and volume
CSA certified for US and Canada
Two and five year residential warranty—
exclusions apply; warranty information can
be found on our website, wolfappliance.com
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
5" (127)33/4" (96)
CONDUIT
Page 3
Planning Information
New Integrated Electric Cooktop
MODEL CT15E/S
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
VENTILATION OPTIONS
30" (762) Cooktop hood or Pro
wall or wall chimney hood or liner
30" (762) or 45" (1143) downdraft
ventilation system
36" (914) Pro island hood
For additional information, refer to the
Cooktop or Pro Ventilation sections of our
website, wolfappliance.com.
ACCESSORIES
Filler strip
Bracket supports for installation
of two integrated modules with
downdraft (Model DD30 only)
Accessories are available through your
Wolf dealer. To obtain local dealer
information, visit the Showroom Locator
section of our website, wolfappliance.com.
Unit dimensions may vary by ±1/8" (3).
SPECIFICATIONS
Overall Cooktop Width 15" (381)
Overall Cooktop Height 33/4" (96)
Overall Cooktop Depth 21" (533)
Heating Element Maximum Power
Triple – 2500 W outer / 1800 W middle / 900 W inner
Single – 1200 W
Heating Element Outer Diameter
Triple – 10" (254)
Single – 61/2" (165)
Minimum Cabinet Depth 223/4" (578)
Minimum Height Clearance* 4 " (102)
Cooktop Cut-Out Width 133/8" (340)
Cooktop Cut-Out Depth 191/4" (489)
Electrical Supply Requirements 240 V AC / 60 Hz / 20 amp
208 V AC / 60 Hz / 15 amp
Conduit 4 ft (1.2 m) flexible 3-wire
Electrical Rating 3.7 kW at 240 V
2.8 kW at 208 V
Shipping Weight 30 lbs (14 kg)
Special Note Cooktop can be installed in combination
with other cooktops or modules
*Minimum 53/4" (146) clearance is required between countertop
and any combustible surface directly below the cooktop.
Specifications are subject to change without notice.
Model CT15E/S
Page 4
Planning Information
New Integrated Electric Cooktop
MODEL CT15E/S
Dimensions in parentheses are in
millimeters unless otherwise specified.
4
INSTALLATION SPECIFICATIONS
t
DIMENSIONS
Minimum Cabinet Depth 223/4" (578)
Cooktop Cut-Out Width 133/8" (340)
Cooktop Cut-Out Depth 191/4" (489)
Location of Electrical Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
13" max
(330)
2"**
191/4" (489)
(51)
COOKTOP CUT-OUT
DEPTH
21/2"min
(64)
18"
(457)
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
33" (838)
RECOMMENDED
CABINET WIDTH
133/8" (340)
COOKTOP CUT-OUT
WIDTH
4" (102)
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-ou
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
21/2"min
(64)
E
15"
(381)
133/8" (340)
COOKTOP CUT-OUT
WIDTH
FRONT OF COUNTERTOP
15"
(381)
191/4" (489)
COOKTOP
CUT-OUT DEPTH
Page 5
Planning Information
New Integrated Electric Cooktop
MODEL CT15E/S
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
INSTALLATION NOTES
Refer to the illustrations and specifications
for overall dimensions, cut-out dimensions and
installation specifics.
Wolf recommends using 33" (838) wide
cabinets for installation of two integrated
modules side by side. An 18" (457) wide
cabinet is recommended for installation of a
single integrated cooktop module.
IMPORTANT NOTE: Review specific installation
instructions for product to product capabilities
If the integrated electric cooktop is to be
used with any combination of additional
cooktop units or modules with a filler strip, the
cut-out width increases to 14" (356). When
multiple cooktops or modules are installed side
by side, refer to the countertop cut-out dimensions on page 6.
A Wolf downdraft system, Cooktop or
Pro ventilation hood is recommended. When
installing a ventilation hood, refer to the specific
requirements of the hood for the minimum
dimension to countertop. Also refer to the
ventilation recommendation charts in the
cooktop or Pro ventilation sections of our
website, wolfappliance.com.
The Wolf integrated electric cooktop requires
a separate, grounded 3-wire 240/208 V AC,
60 Hz, 20 amp service with its own circuit
breaker. It has a 4' (1.2 m) flexible 3-wire
conduit for connection at the electrical supply.
Locate electrical within the shaded area shown
in the illustration on page 4.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the installation instructions
shipped with each Wolf product for detailed
specifications.
This cooktop is intended for indoor use only.
Page 6
Planning Information
New Integrated Electric Cooktop
MODEL CT15E/S
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
MULTIPLE COOKTOP INSTALLATION
With Wolf's integrated modules, you have the
ultimate in customization. You can create your
own design by mixing and matching the various
components within this system. And when you
couple these modules with other cooktops
within the Wolf inventory you and your client will
truly understand freedom of choice.
Some Wolf integrated modules can be installed
together or with a 30" (762) or 36" (914)
cooktop. When multiple units are installed side
by side, the cut-out dimensions that are shown
in the illustration are derived by adding 1
1
/4" (32)
additional space for each additional unit, to give
you your total cut-out width. Refer to the illustration below for countertop cut-out dimensions
for installation of multiple cooktop units.
When two or more cooktops or modules are
installed together, an accessory filler strip is
recommended. Refer to Accessories on page 3.
Countertop cut-out dimensions for installation of multiple cooktop units.
IMPORTANT NOTE: When multiple cooktops
and/ or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/ or modules are installed next to one
another, they can receive their gas supply from a
common line. However, each unit must have its
own regulator installed between the mainline
and the cooktop or module.
IMPORTANT NOTE: Review specifications for
each specific integrated module for installation
requirements and limitations. Refer to the
integrated modules section of our website,
wolfappliance.com.
21/2"min
(64)
FRONT OF COUNTERTOP
191/4"
(489)
CUT-OUT
DEPTH
291/4"
(743)
TWO MODULES WIDTH
441/2"
(1130) THREE MODULES WIDTH OR
441/4"
(1124) 30" COOKTOP AND ONE MODULE
593/4"
(1518) FOUR MODULES WIDTH OR
591/2"
(1511) 30" COOKTOP AND TWO MODULES OR
501/4"
(1276) 36" COOKTOP AND ONE MODULE
14"
(356)
CUT-OUT
WIDTH
Loading...