Wolf 804370, 804367, 804366, 820425, 804365 Installation

Knob Installation

Dual Fuel Range and

Sealed Burner Rangetop Knob Installation

wolfappliance.com 800.222.7820

IMPORTANT NOTE: Depending on the model, additional

knobs may be included with this kit but not utilized.

1) Remove knobs from packaging and discard packag­ing material. Using the chart as reference, identify the
icon etched next to each bezel to determine the correct
placement of each knob. For dual fuel ranges, refer to
the illustration below for oven selector knob place­ment. Once proper placement has been determined,
discard any additional knobs.

2) If any of the knobs "stick" when pressed, remove the
knob and slightly loosen the two bezel screws. Refer
to the illustration below. Once the proper alignment
has been achieved, tighten screws and reinstall knob.

Do not place knobs or bezels in dishwasher. Do not
soak or use abrasive cleaners. To clean, wipe with a
damp cloth and mild detergent and water; rinse and dry.

Icon Text On Knob

Hi-Low and Simmer Hi-Low

100F to 450F

Off and Hi

Off and Hi

BEZEL

SCREW

Knob placement.

OVEN SELECTOR KNOB

ICON

Oven selector knob.
(dual fuel range only)

804624

Page 1 of 1804624 REV-C 12/2011