Dual Fuel Range Riser Installation
Contents
DUAL FUEL RANGE RISER
1Panel, front
1Panel, back
2Supports, side
1Support, center
21Screws, #8 x 1/2"
1Shelf, stainless steel (20" tall riser only)
5Screws, shoulder (for shelf installation only)
1Instructions
wolfappliance.com 800.222.7820
Riser Installation
INSTALL SIDE SUPPORTS
Place front panel on a protected work surface front side down and remove the protective material from the back of the assembly. Limit the amount of material removed to ensure the stainless steel is protected throughout the
assembly process. Insert side supports into riser assembly and secure using two #8 x 1/2" screws per side. 48" wide risers have a unique bracket that must be placed on the left of the riser. Refer to the illustrations below.
Left side support. |
Left side support (48" only). |
|
|
|
|
Right side support.
page 1 of 2