Wohler RMT-170-HD User Manual

the video division of

CONFIDENCE IS EVERYTHING.™

World Leader of In-Rack, Audio, Video, Data Monitoring, and Closed Captioning Solutions

RMT-170-HD

17-Inch High Definition Video Monitor

User Guide

Part Number 821688, Revision A

© 2009 Wohler Technologies, Inc. and PANORAMA. All rights reserved.

This publication is protected by federal copyright law. No part of this publication may be
copied or distributed, stored in a retrieval system, or translated into any human or computer
language in any form or by any means electronic, mechanical, manual, magnetic, or otherwise,
or disclosed to third parties without the express written permission of Wohler Technologies.

Reproduction

Licensed users and authorized distributors of Wohler Technologies, Inc. products may copy
this document for use with Wohler Technologies., Inc. products provided that the copyright
notice above is included in all reproductions.

Customer Support

Wohler Technologies, Inc.
31055 Huntwood Avenue
Hayward, CA 94544
www.wohler.com

Phone: [phone]
FAX: [phone]
US Toll Free: 1-888-596-4537
(1-888-5-WOHLER)
Web: www.wohler.com
Sales: [e-mail]
Support: [e-mail]

Disclaimers

Even though Wohler Technologies, Inc. has tested its equipment and software, and reviewed
the documentation, Wohler Technologies, Inc makes no warranty or representation, either
express or implied, with respect to software, documentation, their quality, performance,
merchantability, or fitness for a particular purpose.

In no event will Wohler Technologies, Inc. be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect in the hardware, software, or its
documentation, even if advised of the possibility of such damages.

Some states do not allow the exclusion or limitation for incidental or consequential damages, so
the above exclusion or limitation may not apply to you.

Printing

This document is intended to be printed on a duplex printer, such that the copy appears on
both sides of each page. This ensures that all new chapters start on a right-facing page.

This document looks best when printed on a color printer since some images may be indistinct
when printed on a black and white printer.

Other Technologies and Products

Dolby is a registered trademark of Dolby Laboratories, Inc.

Microsoft Windows, and Internet Explorer are registered trademarks of Microsoft Corporation.

Last Update

August 6, 2009

ii

© 2009 Wohler Technologies, Inc. All rights reserved.

RMT-170-HD User Guide

Introduction

Overview

The RMT-170-HD monitor is an ideal solution for viewing many
different types of HD/SD (up to 1080i and 720p) or analog video and
computer input. By using a 1920 x 1200 TFT/LCD screen, a perfect
medium is reached in the scaling and interpolation process, providing
superb imaging regardless of video format.

This monitor comes with many in-monitor display features including
IMD, tally, time-code, closed captioning, format display, and area/title
safe.

Topics

The RM-170-HD also provides a host of audio tools including level
metering and built-in speaker monitoring of its dual stereo analog
inputs or SDI embedded audio.

Topics Page

Introduction 1
Safety Instructions 2
Unpacking and Installation 3
Features 4
Specifications 5
Using the RMT-170-HD 12
Using the OSD Menu 19

© 2009 Wohler Technologies, Inc. All rights reserved.

1

RMT-170-HD User Guide

Safety Instructions

Safety Instructions

1. Read, keep, and follow all of these instructions; heed all warnings.

2. Do not use this equipment near water.

3. Use only a dry cloth to clean the equipment.

4. Do not block any ventilation openings. Install only in accordance

with the instructions in the section entitled, “Unpacking and

Installation” on page 3.

5. Do not install near any heat source such as a radiator, heat register,

amplifier, or stove.

6. Do not expose the equipment to rain or moisture.

7. Do not attempt to plug the unit into a two-blade outlet (with only

two prongs of equal width).

IMPORTANT:

By design, these monitors will only plug into a three-prong outlet for
your safety. If the plug does not fit into your outlet, contact an
electrician to replace the obsolete outlet.

8. Protect the power cord from being walked on or pinched,

particularly at plug’s source on the equipment and at the socket.

9. Use only the attachments/accessories specified by the

manufacturer.

10. Unplug the equipment during lightning storms or when unused

for long periods of time.

11. Refer all servicing to qualified service personnel. Servicing will be

required under all of the following conditions:

• The equipment has been damaged in any way, such as when

the power-supply cord or plug is damaged.

• Liquid had been spilled or objects have fallen onto the

equipment.

• The equipment has been exposed to rain or moisture.

• The equipment does not operate normally.

• The equipment has been dropped.

2

© 2009 Wohler Technologies, Inc. All rights reserved.

Unpacking and Installation

Unpacking and Installation

Unpack the RMT-170-HD Monitor and inspect for any apparent physical
damage that may have occurred in transit. In addition to the monitor, the
package should contain:

• The monitor

• A power cord,

• A warranty card, and

• Either:

• A table stand and four M4 x 10mm screws, or

• A rack-mount frame.

RMT-170-HD User Guide

Note:

We recommend you retain the shipping carton for future use.

1. When installing a mount option please assure a soft, non-scratch

surfaced is used to place the monitor on.

2. Place the monitor on the soft surface, screen down to install table

stand, rack ears, or VESA-100 mount.

3. Use the included M4x10mm screws to attach either option. The table

stand attaches on the rear bottom of the unit whilst the VESA-100 is
located on the rear center. Please refer to Chapter 3 for further
reference.

4. Place the RMT-170-HD in the required location for operation.

5. Connect the required signals. For BNC connections use 75Q-rated

connectors.

While the RMT-170-HD is available either as a rack-mount
unit or as a table top unit, the rack-mount unit has a limited
viewing angle that may require downward rotation for
some overhead applications.

6. Connect A.C. Mains power using the included EIC power cord. Please

ground the unit to ensure proper operation.

7. As a final step turn on the mains power using the toggle switch located

on the rear of the RMT-170HSD above the power connection.

© 2009 Wohler Technologies, Inc. All rights reserved.

3

RMT-170-HD User Guide

Features

Features

The RMT-170-HD is a 17" multiple function TFT-LCD monitor with
1920 x 1200 screen resolution (4:9 native aspect). Interlaced signals are
processed by using a 3D comb filter and 3D de-interlacer. Analog
signals are internally digitized with a high quality 10-bit over
sampled analog to digital converter.

Video inputs are provided for serial digital interface (SDI, 2 inputs)
and DVI-I digital sources plus VGA (using DVI connector), component
(YPrPb), Y/C, and CVBS analog signals. In addition to sixteen channels
of SDI embedded audio, four channels of unbalanced analog audio
are accepted with unbalanced outputs available for two channels.

Up to four bar-graph audio meters per side can be superimposed on the
screen for A/V functionality. Metered Channels 1 and 2 are also
available for use with internal speakers. The GPI style tri-color tally is
provides red/green/orange indication using an industry standard
RJ45 connection.

• 1920 x 1200 screen resolution (14:9 native aspect)

• Monitors video from SDI, DVI-I, VGA, Component (YPrPb), Y/C,

and CVBS analog signals (high quality 10-bit over sampled analog to
a digital converter)

• Audio monitoring from internal speakers or headphones

• Tri-color tally light

• Closed-captioning for CVBS signals

• Two HD/SD-SDI inputs with selected channel loop out

• Four analog audio inputs, two analog audio outputs

• Eight audio meters, IMD and time code on screen display

• Built-in speakers with headphone mute

• Native pixel-to-pixel capability or standard scaling

• Audio decoding and display of up to eight channels of SDI

• Full gamma color calibration

4

© 2009 Wohler Technologies, Inc. All rights reserved.

Specifications

Physical Specifications

Table 1–1 lists the specifications for the RMT-170-HD monitor.

Table 1–1 Monitor Specifications

Specifications Value/Domain

Power 40 W, 110/220 AC (50 to 60 Hz)
Dimensions

(Without Stand)

Inputs

Outputs

Active Viewing Area

Resolution 1920 H x 1200 V
Pixel Pitch 0.191 mm x 0.191 mm
Pixel Response <8 ms
Contrast 600:1
Color Depth 16.2 million
Brightness 400 cd/m
Backlight White CCFL
Backlight Life (hrs) 10,000
Color Temperature D55, D65, D93
Viewing Angles 70° Left x 70° Right; 70° Up x 20° Down
Operating

Temperature

RMT-170-HD User Guide

Specifications

16.32” W x 12.13” H x 2.83” D
(414.5 mm x 308 mm x 71.8 mm)

2 HD/SD-SDI with loop through
1 Video: Component CVSB
1 Configurable Video: Y/C, YPbPr, Composite
1 Configurable HDMI, VGA, DVI on DVI-I
4 Audio (RCA)
GPI on RJ45
RS485 with loop through

1 HD/SD-SDI Re-clocked active loop through
2 Audio selected embedded or external audio
outputs

17” diagonal (14.46” H x 9.04” V
(367.2 mm H x 229.5 mm V)

2

32° F to 122° F
(0° C to 50° C)

Figures 1–1 through 1–4 below illustrate the dimensions of the unit’s
features in four different views.

© 2009 Wohler Technologies, Inc. All rights reserved.

5

RMT-170-HD User Guide

Specifications

Figure 1–1 Front Panel Dimensions

Figure 1–2 Rear Panel Dimensions

6

© 2009 Wohler Technologies, Inc. All rights reserved.

RMT-170-HD User Guide

Figure 1–3 Side View Dimensions

Specifications

Figure 1–4 Top View Dimensions

© 2009 Wohler Technologies, Inc. All rights reserved.

7