WLINK WL-R200 User Manual
User Manual
---Apply to WL-R200 Series Industrial 3G/4G Router
User Manual
---Apply to WL-R200 Series Industrial 3G/4G Router
http://www.wlink-tech.com
April, 2016V3.1
http://www.wlink-tech.com
April, 2016
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
1
Copyright © Shenzhen WLINK Technology Company Limited 2012 ～ 2016
Without our written approval, Anyone can’t extract, copy whole or part of content of this file and
can’t spread out in any format.
Caution
Due to product updates or functional upgrading, we may renew the content of this file, and this
file only for reference. All statement, information, suggestion.etc in this file does not compose
any form of guarantee and we WLINK reserves the right of final explanation.
Shenzhen WLINK Technology Company Limited
Add：
3F, Yiben Building, Chaguang Road, Xili, Nanshan District, China,
518000
Web：
http://www.wlink-tech.com
Service Email：
support@wlink-tech.com
Tel：
86-755-86089513
Fax：
86-755-26059261
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
2
Contents
1 Product Introduction .................................................................................................................... 4
1.1 Product overview.............................................................................................................. 4
1.2 Model introduction............................................................................................................ 4
1.3 Product Appearance ........................................................................................................ 6
1.4 Typical Application Diagram ........................................................................................... 6
1.5 Features ............................................................................................................................ 7
2 Hardware Installation .................................................................................................................. 8
2.1 Panel: ................................................................................................................................. 8
2.2 LED Status ........................................................................................................................ 9
2.3 Dimension ....................................................................................................................... 10
2.4 How to Install .................................................................................................................. 10
3 Router Configuration ................................................................................................................. 12
3.1 Local Configure .............................................................................................................. 12
3.2 Basic Configuration........................................................................................................ 13
3.3 WLAN Setting ................................................................................................................. 19
3.4 Advanced Network Setting ........................................................................................... 23
3.5 VPN Tunnel ..................................................................................................................... 29
3.6 System Management .................................................................................................... 34
3.7 Debugging Setting ......................................................................................................... 42
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
3
3.8 “RST” Button for Restore Factory Setting .................................................................. 45
3.9 Appendix (For advanced optional features only) ...................................................... 46
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
4
1 Product Introduction
1.1 Product overview
WLINK industrial Router is based on industrial grade design, built-in high-powered 32bit
MIPS processor, and multi-band 4G/3G communication module, support WCDMA,HSPA+,
4G FDD/TDD etc., provide quick and convenient internet access or private network
transmission to customer, provide wire-line network or wireless WLAN share high speed
access, meanwhile, customized high security VPN (Open VPN、IPSec、SSL), to construct
safe channel, widely used in financial, electric power, environment, oil, transportation,
security, etc..
WLINK industrial series router provide GUI, optional CLI configuration interface, customer
can configure by IE explore or Telnet/SSH, various configuration method, concise and
friendly interface make configuring and managing of all router terminal easier ,meanwhile,
WLINK provide M2M terminal management platform to manage all router terminal with
remote management. User can monitor all terminals which connected to platform
successfully by this platform, provide long-distance control, parameter configuration, and
long-distance upgrade service.
1.2 Model introduction
WLINK industrial grade router series have single module / single SIM card, single module
/ double SIM card, double module / double SIM card design, support multi-band frequency
WCDMA, HSPA+, 4G FDD/TDD etc., and downward compatibility to GPRS、EDGE、
CDMA 1x, etc., optional GPS module Expansion positioning function, to suit different
requirement and different network environment of different operators. Our Router series
have many model for option, below is the product model indications in detail, for more
optional models, please consult local distributors /resellers.
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
5
Table 1-1 Router partial model table
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
6
1.3 Product Appearance
Table 1-2 WLINK Router Appearance
Series
R200
R200－W(G)
R520-g
R520-d
Appearance
Ports
1*LAN
1*WAN
1*LAN + 1*WAN +
GPS or WLAN(11n 1T1R)
1*WAN + 4*LAN +
GPS or WLAN(11n 1T1R)
1*WAN + 4*LAN +
single module/dual SIM,
dual module/dual SIM
Product
category
Single port router
Single port Wi-Fi（GPS）router
Multi-port Wi-Fi router
multi-port double-link router
1.4 Typical Application Diagram
WLINK 4G/3G Router widely used in Telecom, economic, advertisement, traffic, environment
protection business area.
For example, in economic area, R200 Series Router connect server by IPSec & GRE to
ensure data security, tiny design makes it could installed into ATM machine. All these
technology ensured safe and reliable data transmission, and minimize the probability of
network disconnection, and maximize the usability of economic business like ATM, POS .etc.
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
7
Figure 1-1 Network Topology
WLINK industrial router is based on mobile wireless public network or private network,
build wireless data channel in mature network, to lower down the cost of wireless data
transmission and technique.
1.5 Features
Various cellular module optional, LTE/HSPA+/EVDO/CDMA2000 optional
Support IEEE802.11b/g/n Wi-Fi AP function, extended support to Wi-Fi terminal,
WDS bridging, support WEP, WPA/WPA2 Personal/Enterprise, TKIP/AES, etc.,
Authenticated encryption mode
Support virtual data and private network（APN/VPDN）
Optional support RS-232/RS-485 interface data transparent transmission and
protocol conversion
Support on-demand dialing, include timing on/off-line, voice or SMS control
on/off-line, data trigger online or link idle offline
Support TCP/IP protocol stack, support Telnet, HTTP, SNMP, PPP, PPPoE, etc.,
network protocol
Support VPN Client（PPTP, L2TP）,optional support Open VPN, IPSec, HTTPs,
SSH, etc. advanced VPN function
Provide friendly user interface, use normal web internet explorer to easily
configure and manage, long-distance configure Telnet/SSH + CLI
Optional IPv6 protocol stack
Optional support M2M terminal management platform
WDT watchdog design, keep system stable
Customization as customer’s demand
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
8
2 Hardware Installation
This chapter is mainly for installation introduction, there would be some difference
between the scheme and real object. But the difference doesn’t have any influence to
products performance.
2.1 Panel:
Table 1-1 WLR200 -Structure
WLINK
Tech.
R200 series
Front
Rear
There are some different for Antenna interface and indicator light for the
expanded Wi-Fi, GPS series.
Table 2-1 Router Interface
Port
Instruction
Remark
USIM
Plug type SIM Slot, support 1.8/3V/5V automatic
detection
3G
3G antenna, SMA connector, 50Ω
WIFI
Wi-Fi antenna, SMA connector, 50Ω
Optional
LAN
10/100Base-TX，MDI/MDIX self-adaption,
R200: 1*LAN
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
9
Port
Instruction
Remark
WAN
10/100Base-TX，MDI/MDIX self-adaption
R200 serial
port and WAN
port multiplex
RST
Reset button,(press on button 5 seconds)
PWR
Power connector
5 ～ 26V DC
WAN/CON
Four pin serial port, suitable for collection device
with RS-232 or RS-485 interface, for wireless data
transmission, CON for debug test.
R20 serial port
and WAN port
multiplex
2.2 LED Status
Table 2-2 Router LED indictor Status
silk-screen
color
status
Indication
NET
Green
Blink
Strong Signal
Orange
Blink
Normal Signal
Red
Blink
Weak Signal
Blinking
slowly(2s)
Already login network or dialing online. LED color is
matched with signal indication. For example, for
strong signal, after login network or online, it will
blink green light.
Blinking
quickly(0.5s)
Dialing
WLAN
Green
Solid light
WLAN port open, but no data sending.
Green
Blinking
quickly
Data is in transmitting
Green
Dark
WLAN port isn’t opened
LAN
Green
Solid light
connect ok
Green
Blinking
Data Sending
Green
Dark
Not connected
There are some difference among the LED indicator of expanded Wi-Fi, GPS
function and single module/double SIM, double module/double SIM series
products.
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
10
2.3 Dimension
Figure 2-2 WL-R200 Series Router Dimension Figure
2.4 How to Install
2.4.1 SIM/UIM card install
If use dual SIM/UIM card router, you may need insert dual SIM before configure it. After
installation, please follow below steps to connect the router.
Before connecting, please disconnect any power resource of router
2.4.2 Ethernet Cable Connection
Use the Ethernet cable to connect the cellular Router to computer directly, or transit by a
switch.
2.4.3 Serial Port Connection
If you want to connect the router via serial port to laptop or other devices, you should
prepare a serial port or RJ45 cable, this cable is optional. One end connect to computer
serial port, the other end connects the console port of the router
Before connecting, please disconnect any power resource of router
2.4.4 Power Supply
In order to get high reliability, WLINK Series Router adapt supports wide voltage input
range: +5V～+36VDC, support hot plug and complex application environment.
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
11
2.4.5 Review
After insert the SIM/UIM card, connect Ethernet cable and necessary antenna, connect
power cable.
Please connect the antenna before connect the power cable, otherwise the signal
maybe poor because of impedance mismatching.
Notice:
Step 1 Check antenna connection.
Step 2 Check SIM/UIM card, confirm SIM/UIM card is available.
Step 3 Power on the industrial Router
----END
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
12
3 Router Configuration
This Chapter introduces the parameter configuration of the router, the router can be
configured via web internet explorer, Firefox, or chrome. Here we take GUIs 7 system and
Internet Explorer 9.0 as sample.
3.1 Local Configure
The router supports to be configured by local Ethernet port, you could specify a static IP or
DHCP get IP for your computer. The default IP address is 192.168.1.1，subnet mask is
255.255.255.0, please refer to followings:
Step 1 Click
“start > control panel”, find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 3-3 Network Connection
Step 2
Obtain a IP address automatically or set up IP address,192.168.1.xxx(XXX can be
any number between 2～254)
Step 3
Run an Internet Explorer and visit “
http://192.168.1.1/
”, to enter identify page.
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
13
User should use the default user name and password when log in for the first time
Figure 3-4 User Identify Interface
----END
3.2 Basic Configuration
Different software version have different web configuration interface, below take R200
2.6.0.1 version as example.
After visit the WEB interface, you can check the current status of Router, or modify router
configuration via web interface, below is the introduction for the common setting.
R200 Industrial Cellular Router User Manual
www.wlink-tech.com
14
Figure 3-5 Router Status GUI
3.2.1 WAN Configure
Step 1 Single Click Basic Network-> WAN, you can modify relevant parameter according
to the application.
Figure 3-1 WAN Settings GUI
Table 3-1 Cellular Setting Parameter Instruction
Parameter
Instruction
Backup mode
4 options for WAN
Loading...