WJ Company AH101-PCB, AH101 Datasheet
WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com March 2002
AH101
Product Description
The AH101 is a medium power gain block that
offers excellent dynamic range in a low cost surface mount package. The combination of a single supply voltage and an unconditionally stable internally matched device, makes it ideal for
both narrow band and broadband applications.
Superior thermal design allows the product to
achieve +45 dBm OIP3 performance at a
mounting temperature of +85°C with an associated MTBF of >100 years
3
.
Product Features
•
50-1500 MHz
•
+45 dBm Output IP3
•
13 dB Gain
•
+27 dBm P1dB
•
MTBF >100 Years
•
Unconditionally Stable
•
Internally Matched
•
Single Bias Supply
(+7.0 to +9.0 V)
Functional Diagram
Medium Power, High Linearity Amplifier
Recommended Maximum Ratings
Parameter Rating
Operating Case Temperature -40 to +85°C
Storage Temperature -55 to +125°C
DC Voltage +11 V
RF Input Power (continuous) +18 dBm
Operation of this device above any of these parameters may cause per manent damage.
Ordering Information
Part No. Description
AH101 Medium Power High Linearity Amplifier
(Available in tape and reel)
AH101-PCB Fully Assembled Application Circuit
The Communications Edge
™
Advanced Product Information
Specifications
Parameter Units Min. Typical Max.
Frequency Range MHz 50-1500
S21 - Gain dB 12 13.5
S11 - Input Return Loss dB -20
S22 - Output Return Loss dB -13
Output IP3 dBm +43 +47
Output P1dB dBm +27
Noise Figure dB 5.0
Operating Current Range mA 170 200 230
Supply Voltage V 9.0
Test conditions unless otherwise noted.
1.T = 25°C, Vdd = 9.0 V, Frequency = 800 MHz, 50 ohm system.
2. OIP3 measured with two tones at an output power of 8 dBm/tone separated by 10 MHz.The
suppression on the largest IM3 product is used to calculate the OIP3 using a 2:1 slope rule.
3. MTBF calculated with channel temperature at 155˚C.
Typical Parameters
Parameter Units Typical
Frequency MHz 900 1500
S21 dB 13.5 12
S11 dB -20 -12
S22 dB -15 -12
Output IP3 dBm +47 +46
Output P1dB dBm +27.0 +25.0
Noise Figure dB 3.5 4.0
Typical parameters reflect performance in an application curcuit.
Actual Size
4
123
Function Pin No.
Input 1
Ground 2
Output/Bias 3
Ground 4
WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com March 2002
AH101
Advanced Product Information
Performance Charts (Vd = 9.0 V, Id = 200 mA,T = 25°C)
Gain vs. Frequency
18
17
16
15
14
13
12
Gain (dB)
11
10
9
8
0
200 400 600
7 V
8 V
9 V
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
OIP3 vs. Frequency
50
45
40
35
OIP3 (dBm)
30
25
20
0
200 400 600
7 V
8 V
9 V
Pout = 8 dBm/tone
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
S21 vs. Frequency over Temperature
18
17
16
15
14
13
S21 (dB)
12
11
10
9
8
-40
40
80
2000 400 600
0
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
Return Loss vs. Frequency
0
-5
-10
-15
-20
-25
Return Loss (dB)
-30
-35
-40
0
S22
S11
200 400 600
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
OIP3 vs. Pout
50
45
40
35
OIP3 (dB)
30
25
20
0
7 V
8 V
9 V
RF = 900 MHz
5
1510 20 25
Pout (dBm)
S11 vs. Frequency over Temperature
0
-5
-10
-15
-20
S22 (dB)
-25
-30
-35
-40
-40
40
80
2000 400 600
0
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
Noise Figure vs. Frequency
6
5
4
3
2
Noise Figure (dB)
1
0
0
200 400 600
7 V
8 V
9 V
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
P1dB vs. Frequency
35
30
25
P1dB (dB)
20
15
0
7 V
8 V
9 V
200 400 600
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
S22 vs. Frequency over Temperature
0
-5
-10
-15
-20
S22 (dB)
-25
-30
-35
-40
-40
40
80
2000 400 600
0
1000800 1200 1400 1600 1800 2000
Frequency (MHz)
Gain vs. Pout
7 V
8 V
9 V
2018 22 24 26 28 30
Pout (dBm)
50
45
40
35
OIP3 (dB)
30
25
20
-40
OIP3 vs. Temperature
7 V
8 V
9 V
RF = 900 MHz
Pout = 8 dB/tone
0-20
Temperature (°C)
4020 60 80
18
17
16
15
14
13
12
Gain (dB)
11
10
9
8
RF = 900 MHz
1210 14 16
Loading...