WJ Communications SMJ500-13A, SMJ500-13A-PCB Datasheet

WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.wj.com

September 2001

The Communications Edge

™

The document contains information on a new product.

Specifications and information are subject to change without notice.

SMJ500-13A

Quad-Diode Mixer

Preliminary Product Information

Functional DiagramProduct Features

•

Input IP3 +20 dBm

•

RF Frequency 2-500 MHz

•

LO Frequency 2-500 MHz

•

IF Frequency DC-500 MHz

•

LO Drive Level +13 dBm

Recommended Maximum Ratings

Parameter Rating

Operating Temperature -40 to +70°C
Storage Temperature -65 to +100°C
RF Input Power at 25°C (continuous) +17 dBm

Ordering Information

Part No. Description

SMJ500-13A Diode Mixer (Available in tape and reel)
SMJ500-13A-PCB Fully Assembled Application Circuit

Specifications

Parameter Units Minimum Typical Maximum Condition

RF Frequency MHz 2 500
LO Frequency MHz 2 500
IF Frequency MHz DC 500

SSB Conversion Loss dB 6.0
L-R Isolation dB 44

L-I Isolation dB 36
IIP3 dBm +15 +20
LO Drive dBm +13
RF Return Loss dB 12

LO Return Loss dB 14
IF Return Loss dB 12

Test conditions unless otherwise noted.

1.Tested in a 50 Ohm System, low side LO.

Function Pin No.

Ground 1

IF 2

RF 3

Ground 4-5

LO 6

123

654

WJ Communications, Inc. • Phone: 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.wj.com

September 2001

SMJ500-13A

Preliminary Product Information

Outline Drawing

Land Pattern

Mounting Configuration