WJ Communications SA1137-1 Datasheet
Inverting Data Driver
•Low Power Consumption
+11V @ 250 mA typical
-5 V @ 27 mA typical
•Greater than 12 Gbps
•8 V output amplitude
•5 V output amplitude control
range
•25 ps rise/fall times
•Electronic crossing % control
•Output level detector
•Reference level detector
•Integral modulator DC bias
•Internally regulated
•Automatic DC bias sequencing
SA1137-1 OPTICAL
MODULATOR DRIVER
WJ’s10Gbpsmodulatordrivers
AnRFevolutionforOC-192
The SA1137 is another addition in WJ’s series of
hybrid-based products optimized for OC-192 networks.The SA1137 is a full-function amplifier capable of driving LiNbO
3
modulators. The SA1137’s
limiting action can actually improve on multiplexer
rise and fall times. This makes the SA1137 an
excellent choice for optical RZ and NRZ systems
alike. The SA1137 is designed for the full range of
OC-192 data rates from 9.9Gbps through
12.25Gbps (FEC rate).
THE COMMUNICATIONS EDGE
™
WJ Communications, Inc
1 866 618 7704 • 408 577-6620 fax • sales@wj.com
THE COMMUNICATIONS EDGE
™
WJ Communications, Inc
1 866 618 7704 • 408 577-6620 fax • sales@wj.com
SA1137-1 INVERTING OC-192 OPTICAL MODULATOR DRIVER AMPLIFIERSPECIFICATIONS
Parameter Conditions Minimum Typical Maximum Units
Data Rate NRZ 12.25 Gbps
Minimum Operating 30 KHz
Frequency
Input Voltage Range 600 900 mV
Output Signal Vgain = 0V 7.5 >8 V
Amplitude (max.)
Output Signal Vgain -10V <3 4 V
Amplitude (min.)
Level Control 30 KHz
Bandwidth
Rise/Fall Time 20% to 80% ≤25 30 ps
Crossing Point no connection 45% 50% 55%
Control Range -5V +5%
+5 -5%
Output Level V
Ref
380 mV
Detector V
Ref-
V
Det
90@4Vpp/300@7.5Vpp mV
Input/Output VSWR 100KHz to 15 GHz <2:1 2.3:1
Operating Case Temperature -5 +75 °C
Pin
Reference Function Voltage Current (mA)
typical maximum
Vcc Positive Bias +11v 330 375
V
EE
Negative Bias -5v 27 30
Gain Output level control 0 to -10V 6
Bias Output DC offset
(thru a 1.8K ohm) -10 to +25V
DC
Det Output level detector 0-400mV
Ref DC reference for detector 380mV
Co Adj Crossover adjustment -5 to +5v 1
Revision: 020101V101
Notes:
1. Unit weight .XXX onces max.
2. Dimensions are expressed in
inches
3. Tolerance .XXX ± 0.005
.XX ± .02
The information contained in this document has been carefully checked and is beleived to be reliable as of the date of publication. However, WJCI
makes no express or implied warranties or representations regarding same and assumes no responsiblities for inaccuracies. WJCI reserves the right to
change products and specification, or to discontinue products without notice. For latest information, please contact WJCI sales at 1-800-951-4401.
Loading...