Wixey WR100 User Manual

Wixey

DIGITAL CALIPERS with FRACTIONS
MODEL WR100 Type 2

INSTRUCTIONS

Measurements:

Functions:

• ON/OFF- turns the power completely on or off. When turned ON, the
calipers set to 0.00.

• IN/MM- toggles from decimal inches with fractions to millimeter.

• ZERO- sets display to 0.00 at any position

• Auto shut off- turns power off automatically after 30 minutes and

retains calibration. After 4 hours turns off completely.

Battery Replacement and Trouble Shooting:

Problem Possible

Cause

Flashing Digits Low

Voltage

No Display Low

Voltage

No Display Bad

Contact

Erratic or
Frozen Display

Internal
Error

Solution
Replace Battery

Replace Battery
Clean Battery
Remove Battery

Wait 1 Minute
and Replace

For questions, comments, and more information go to: www.wixey.com