Wiwynn™ SV320
Maintenance
User Manual
Version 1.2
Published Apr. 2013
Copyright © 2012 Wiwynn. All rights reserved
Wiwynn™ SV320 Maintenance User Manual 2
Content
System Upgrades ......................................................................................5
Opening the Server ...................................................................................5
Removing the Top Cover ............................................................................... 5
Installing the Top Cover ................................................................................. 6
Installing and Removing HDDs ..................................................................7
For HDDs Middle-Plane MiniSAS HDD .......................................................... 7
For 2.5-inch
HDD
....................................................................................... 10
Replacing a System Fan ........................................................................... 13
Fan module and connector locations .......................................................... 13
Removing the fan module ........................................................................... 13
Installing a fan module ................................................................................ 14
Replacing a PDB case .............................................................................. 16
Removing the PDB case .............................................................................. 16
Installing the PDB ........................................................................................ 19
Replacing a Power Supply Unit ............................................................... 22
Removing the Power Supply Unit ............................................................... 22
Installing the Power Supply Unit................................................................. 23
The replacement of SAS Raid Card .......................................................... 24
Remove the SAS Raid Card ......................................................................... 24
Install the SAS Raid Card ............................................................................. 25
The replacement of LAN card .................................................................. 26
Remove the LAN card ................................................................................. 26
Install the LAN card ..................................................................................... 27
Replacing the Backplane ......................................................................... 28
Reinstalling the Backplane ...................................................................... 31
Replacing the Mainboard........................................................................ 35
Removing the miniSAS card ........................................................................ 35
Removing the Memory Modules ................................................................. 36
Removing the Heat Sink Assembly .............................................................. 37
Removing the Processor ............................................................................. 38
Removing the Mainboard ........................................................................... 38
Reinstalling the Mainboard ..................................................................... 41
Installing the Processor ............................................................................... 43
Installing the Heat Sink Assembly................................................................ 44
Wiwynn™ SV320 Maintenance User Manual 3
Installing the Memory Modules .................................................................. 45
Installing the SAS Raid Card ........................................................................ 45
Closing the Server ....................................................................................... 46
Rack Installation Procedure .................................................................... 47
Removal of Wiwynn™ SV320 from Rack ..................................................... 47
Installation of Wiwynn™ SV320 to the Rack ............................................... 50
Wiwynn™ SV320 Maintenance User Manual 4
Copyright
Copyright © 2012 by Wiwynn Corporation. All rights reserved. No part
of this publication may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language or computer
language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior
written permission of Wiwynn Corporation.
Disclaimer
The information in this guide is subject to change without notice.
Wiwynn Corporation makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties of merchantability or fitness for
any particular purpose. Any Wiwynn Corporation software described
in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not Wiwynn
Corporation, its distributor, or its dealer) assumes the entire cost of all
necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software.
Wiwynn™ SV320 Maintenance User Manual 5
System Upgrades
Opening the Server
Removing the Top Cover
1 Loosen the two thumbscrews (1) on the rear panel.
2 Push the cover toward the rear and lift (2) (3) off from the chassis.
Note: Before opening the Top Cover and replace any components, please first turn off the
system and unplug the power cord to avoid any malfunction of the system.
1 2 3
Wiwynn™ SV320 Maintenance User Manual 6
Installing the Top Cover
1 Slide the top cover toward the front (1) until it is closed.
2 Tigthen the two thumbscrews (2) on the rear panel.
2
1
Wiwynn™ SV320 Maintenance User Manual 7
Installing and Removing HDDs
For HDDs Middle-Plane MiniSAS HDD
HDDs Middle-Plane MiniSAS cable connection
1 Disconnect the miniSAS cable (1) from the HDD.
2 Disconnect the miniSAS cable (2) from the mainboard.
1
2
Wiwynn™ SV320 Maintenance User Manual 8
Removing the Middle-Plane MiniSAS HDD with carrier
1 Remove the HDD carrier.
(1) Push the HDD carrier latch (1) to release the lever.
(2) Swing open the lever (2) and pull out the carrier (3) from the chassis.
2 Remove the four screws from the HDD carrier (1) and remove the
HDD (2) from the carrier.
1 2 1 1 1 1 2
3
Wiwynn™ SV320 Maintenance User Manual 9
Installing the Middle-Plane MiniSAS HDD with carrier
1 Slide the HDD into the carrier (1) and secure the HDD to the carrier with
four screws (2).
2 Install the HDD carrier.
(1) Slide the HDD carrier all the way into the drive bay.
(2) Close the HDD carrier lever and push the HDD carrier until it locks into
place.
2
1 2 2 2 2
1
Wiwynn™ SV320 Maintenance User Manual 10
For 2.5-inch
HDD
2.5-inch HDD SATA cable
connection
1 Disconnect the SATA cable (1) from the HDD.
2 Disconnect the SATA cable (2) from the mainboard.
2
1
Wiwynn™ SV320 Maintenance User Manual 11
Removing the 2.5-inch HDD
1 Remove the top cover (see “Installing the Top Cover” on Page 1).
2 Remove the HDD bracket.
(1) Remove the three screws (1) that secure the 2.5-inch HDD bracket to
the chassis.
(2) Pull up the 2.5-inch HDD bracket until you see the HDD power and data
cables.
(3) Disconnects the power and data cables (2) from the HDD.
3 Remove the four screws from the HDD bracket (1) and remove the
HDD (2) from the carrier.
1
2 1 1 1 1
2
Wiwynn™ SV320 Maintenance User Manual 12
Installing the 2.5-inch HDD
1 Slide the HDD into the bracket (1) and secure the HDD to the bracket
with four screws (2).
2 Install the HDD bracket.
(1) Connect the data and power cables (1) to the HDD.
(2) Install the HDD with bracket (2) into the chassis.
(3) Use three screws (2) to secure the HDD bracket to the chassis.
(4) Install the top cover (see “Installing the Top Cover” on Page 1).
2
1
1 1 1
1
2
Wiwynn™ SV320 Maintenance User Manual 13
Replacing a System Fan
Fan module and connector locations
Note: To remove Fan1, first you have to remove the Fan2, Fan3 and Fan4, because all fan
cables are routed beneath.
Removing the fan module
1 Remove the top cover (see “Removing the Top Cover” on Page 5).
2 Disconnect the fan cable connector (1).
Fan1
Fan2
Fan3
Fan4
4 3 2
1
Fan Connectors
1
Wiwynn™ SV320 Maintenance User Manual 14
3 Pull up the fan module (2) and remove Fan4 from the fan bracket.
Note: To remove Fan1, first you have to remove the Fan2, Fan3 and Fan4, because all
fan cables are routed beneath.
Installing a fan module
1 Insert the fan module (1) into the fan bracket.
2
1
Wiwynn™ SV320 Maintenance User Manual 15
2 Connect the fan cable connector (2).
5 Install the top cover (see “Installing the Top Cover” on Page 6).
2
Wiwynn™ SV320 Maintenance User Manual 16
Replacing a PDB case
Removing the PDB case
1 Before releasing the PDB case from the chassis, you have to pull both
PSU out from the PSU case.
2 Before unsecure the cables, let’s look at their locations first.
P1
P5
P7
P4
P6
P3
P2
Wiwynn™ SV320 Maintenance User Manual 17
3 Release the P7, P5 cables from the connector.
4 Release the P6, P4 cables from the connector.
5 Release the P1 from the connectors.
P5
P7
P4
P6
P1
Wiwynn™ SV320 Maintenance User Manual 18
6 Release the P3 cable from the connectors.
7 Release the P2 cable from the connectors.
8 Unsecure the screws on top of the PDB case.
P3
P2
Wiwynn™ SV320 Maintenance User Manual 19
9 Remove the PDB case from the chassis now.
Installing the PDB
1 To install the PDB, first, place the PDB case back to the chassis as
shown.
2 Secure the PCB case with screw.
Wiwynn™ SV320 Maintenance User Manual 20
3 Secure all the cables (P1, P2, P3, P4, P5, P6, P7) back to the
motherboard.
P1
P5
P7
P4
P6
P3
P2
Wiwynn™ SV320 Maintenance User Manual 21
4 Push the PSU unit back to the chassis to finish the installation.
Wiwynn™ SV320 Maintenance User Manual 22
Replacing a Power Supply Unit
Removing the Power Supply Unit
1 To remove the power supply unit, please press the blue lever toward left
side.
2 Pull the PSU out horizontally to remove the PSU.
Wiwynn™ SV320 Maintenance User Manual 23
Installing the Power Supply Unit
1 To install the power supply unit, push the new PSU into the chassis
horizontally.
2 When the PSU is approaching the chassis, please press the blue lever
(1) to the left and push the PSU to the end.
1
2
Wiwynn™ SV320 Maintenance User Manual 24
The replacement of SAS Raid Card
Remove the SAS Raid Card
1 Remove the bezel of the expansion slot with screwdriver.
2 Pull the SAS Raid card off the chassis.
Wiwynn™ SV320 Maintenance User Manual 25
Install the SAS Raid Card
3 To install the SAS Raid card, just insert the SAS Raid card with
balanced strength.
4 Tighten the screw of the SAS Raid card to complete the installation.
Wiwynn™ SV320 Maintenance User Manual 26
The replacement of LAN card
Remove the LAN card
1 Remove the bezel of the expansion slot with screwdriver.
2 Pull the LAN card off the chassis.
Wiwynn™ SV320 Maintenance User Manual 27
Install the LAN card
3 To install the LAN card, just insert the LAN card with balanced
strength.
4 Tighten the screw of the LAN card to complete the installation.
Wiwynn™ SV320 Maintenance User Manual 28
Replacing the Backplane
1 Remove the top cover (see “Removing the Top Cover” on Page 5).
2 Remove all 3.5 inch hard drives from the hard drives cages.
3 Remove eight screws (1) from the top of the backplane cover. Remove
two screws (2) each from edge of the backplane cover. Save the
screws for reinstallation later.
4 Remove the three screws that secure the backplane bracket to
the chassis.
1 1 1
1 1 1 2 2 2 2
1
1
Wiwynn™ SV320 Maintenance User Manual 29
5 Disconnect all power cables and miniSAS cable from the backplane.
6 Remove the four screws that secure the backplane bracket to the
chassis.
Wiwynn™ SV320 Maintenance User Manual 30
7 Push the backplane with bracket slightly toward the rear and pull it up.
8 Remove the twelve screws (1) from the backplane board and detach
the board (2) from the bracket.
Wiwynn™ SV320 Maintenance User Manual 31
Reinstalling the Backplane
1 Position the backplane board into the bracket (1). Secure the board into
place using twelve screws (2).
2 Insert the backplane with bracket in its slot as shown and push it slightly
toward the front until it locks into place.
Wiwynn™ SV320 Maintenance User Manual 32
3 Secure the backplane bracket to the chassis using four screws.
4 Secure the three screws back to the backplane bracket that attaching to
the chassis.
Wiwynn™ SV320 Maintenance User Manual 33
5 Insert all power cables and miniSAS cable to the backplane..
6 Position the small front top cover over the chassis and gently lower it
into place.
Wiwynn™ SV320 Maintenance User Manual 34
7 Secure the small front top cover to the top of the chassis using eight
screws (1). Secure the small front top cover to the sides of the chassis
using four screws (2).
8 Install the top cover (see “Installing the Top Cover” on Page 6).
1 1 1 1 1 1 2 2 2 2 1
1
Wiwynn™ SV320 Maintenance User Manual 35
Replacing the Mainboard
1 Remove the top cover (see “Removing the Top Cover” on Page 5).
2 Remove the anti-static pvc cover.
Removing the miniSAS card
1 Disconnect the miniSAS cable (1) from the board.
Wiwynn™ SV320 Maintenance User Manual 36
3 Gently lift the miniSAS card from the slot.
Removing the Memory Modules
1 Open the locking clips (1) that secures the memory modules.
2 Gently pull the DIMM upward (2) to pull it away from the chassis.
3 Repeat Steps 1 & 2 to remove additional memory modules.
1
1
2
Wiwynn™ SV320 Maintenance User Manual 37
Removing the Heat Sink Assembly
1 Use a phillips screwdriver to loosen the four screws on the heat sink as
shown below.
2 Lift the heat sink away from the mainboard.
3 Repeat Steps 1 & 2 to remove the other heat sink assembly.
Wiwynn™ SV320 Maintenance User Manual 38
Removing the Processor
IMPORTANT: Before removing the processor from the mainboard, make sure
to create a backup file of all important data.
1 Release and pull up the load lever.
2 Flip open the processor cover.
3 Pull out the processor from the socket.
4 Repeat Steps 1 ~ 3 to remove the other processor.
Removing the Mainboard
1 Disconnect the power supply cables from its mainboard connectors.
1 2 3
Wiwynn™ SV320 Maintenance User Manual 39
2 Disconnect the fan cables from its mainboard connectors.
3 Disconnect the power button/LED, SATA & front I/O cables from its
mainboard connectors.
Wiwynn™ SV320 Maintenance User Manual 40
4 Remove the nine screws that secure the mainboard to the chassis.
5 Slide the board toward the front of the server (1) and gently tilt the
board (2) until you can lift it away from the chassis.
1
2
Wiwynn™ SV320 Maintenance User Manual 41
Reinstalling the Mainboard
1 Insert the board and gently lower it into the chassis (1). Slide the board
toward the rear of the server (2) until the I/O ports extrude from their
port holes.
2 Make sure the screw holes on the mainboard are aligned with those on
the chassis. Secure the mainboard with nine screws.
1
2
Wiwynn™ SV320 Maintenance User Manual 42
3 Connect the power button/LED, SATA & front I/O cables to its
mainboard connectors.
4 Connect the fan cables to its mainboard connectors.
Wiwynn™ SV320 Maintenance User Manual 43
5 Connect the power supply cables to its mainboard connectors.
Installing the Processor
1 Align the slots on the processor with the socket and make sure that
it is properly oriented.
2 Press the processor into place (1) and pull the cover (2) over it.
3 Push the load lever downward (3) until it locks into place.
4 Repeat Steps 1 ~ 3 to install the other processor.
3
2
1
Wiwynn™ SV320 Maintenance User Manual 44
Installing the Heat Sink Assembly
1 Position the heat sink assembly on top of the processor, making sure
the screws are aligned with the screw holes on the mainboard.
2 Secure the heat sink assembly to the mainboard using four screws.
3 Repeat Steps 1 & 2 to install the other heat sink assembly.
Wiwynn™ SV320 Maintenance User Manual 45
Installing the Memory Modules
1 Insert the memory module into the DIMM slot (1) and then press it down
until it clicks into place (2).
2 If additional memory modules are available, install it in the other DIMM
slots by repeating Step 1.
Installing the SAS Raid Card
1 Insert the SAS Raid Card into the PCIe x16 slot and secure it in place.
2 2 1
Wiwynn™ SV320 Maintenance User Manual 46
2 Secure the SAS Raid Card bracket using one screw. Insert the SAS
Raid Card cable until it locks into place.
Closing the Server
1 Position the anti-static cover into place.
2 Install the top cover (see “Installing the Top Cover” on page 6).
Wiwynn™ SV320 Maintenance User Manual 47
Rack Installation Procedure
If it is your first time to install the server to the rack, please kindly pay attention
to the procedures below for safety concern.
Removal of Wiwynn™ SV320 from Rack
1 If the system is powered on, please press the power/log button to
shutdown the system. Press the power/log button for about 5 seconds,
the LED light will turn Purple as shown.
Wiwynn™ SV320 Maintenance User Manual 48
2 After that, go to the back panel of the server, and start removing the
cables.
3 Start with the power cable.
4 Then, unplug the network cable from the back panel.
Wiwynn™ SV320 Maintenance User Manual 49
5 Finally, unplug the monitor cable (If you have connected your
server to a monitor).
6 Now, you can pull the server out of the rack.
Wiwynn™ SV320 Maintenance User Manual 50
Installation of Wiwynn™ SV320 to the Rack
1 Lift up the new server and then push it horizontally into the designated
rack as shown.
2 Push the machine into the rack until it is securely placed on the rack.
3 Plug in all necessary cables one by one. Start with Power cable
Network Cableand finally the VGA Cable
Wiwynn™ SV320 Maintenance User Manual 51
Power Cable Network Cable
VGA Cable
4 Turn on the new server by pressing on the Power/Log button on the
front panel of the system.
Loading...