Wittco CSD-1826 Service Manual

OPERATIONS
MAINTENANCE
MANUAL

CARVING STATIONS

WITTCO MODEL NUMBERS

CSD-600
CSD-1220
CSD-1826

LIMITED WARRANTY

Wittco warrants the Products that it manufactures to be free from defects in materials and workmanship, under normal use and
service, for the periods indicated below from the date of purchase when installed and maintained in accordance with Wittco's written
instructions. Buyer must establish the "Products" purchase date by returning Wittco's Warranty registration Card or by other means
satisfactory to Wittco in its sole discretion.

Wittco warrants its Products to be free from defects in materials and workmanship from the date of purchase (subject to the
foregoing conditions) for the period(s) of time and on the conditions listed below:

a) Ninety (90) days Labor Warranty

b) One (1) Year Parts Warranty

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT. Without limiting the generality of the

foregoing, SUCH WARRANTIES DO NOT COVER: Coated incandescent light bulbs or heat lamps, all glass components. Product
misuse, tampering, misapplication, application of improper voltage, or recalibration of thermostats or high limit switches.

LIMITATION OF REMEDIES & DAMAGES

Wittco's liability and Buyer's exclusive remedy hereunder will be limited solely, at Wittco's option, to repair or replacement by a
Wittco authorized service agency (other than where Buyer is located outside of the United States or Canada, in which case Wittco's
liability and Buyer's exclusive remedy hereunder will be limited solely to replacement of part under warranty) with respect to any
claim made within the applicable warranty period referred to above. Without limiting the generality of the foregoing, all portable
Products, as defined by Wittco, shall be delivered by Buyer, at its sole expense, to the nearest Wittco authorized service agency for
replacement or repair. Wittco reserves the right to accept or reject any such claim in whole or in part. Wittco will not accept the
return of any Product without prior written approval from Wittco, and all such approved returns shall be made at Buyer's sole
expense. WITTCO WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES. FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST OF PRODUCTS AND LOSS OF PROFITS
RESULTING FROM THE USE OF OR INABILITY TO USE THE PRODUCTS.

WITTCO TECHNICAL & PRODUCT SUPPORT

TECHNICAL SUPPORT & SERVICE INQUIRES MAY BE DIRECTED TO WITTCO BY:

1. CALLING DIRECTLY TO:

WITTCO FOODSERVICE EQUIPMENT TECHNICAL & SERVICE DEPARTMENT - (800)

367-8413

8:00 AM - 4:30 PM (CENTRAL TIME)

2. FAXING DIRECTLY TO:

WITTCO FOODSERVICE EQUIPMENT TECHNICAL & SERVICE DEPARTMENT - (414)

354-2821
DAILY 24 HOURS

3. MAILING DIRECTLY TO:

WITTCO FOODSERVICE EQUIPMENT INC.
7737 NORTH 81ST. STREET
MILWAUKEE, WISCONSIN 53223 USA

WHEN DIRECTING INQUIRIES TO WITTCO PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE TO AVOID DELAYS

1. Wittco model number indicated on the equipment serial data plate located at the electrical connection.

2. Wittco serial number indicated on the equipment serial data plate. The equipment serial number will also have
two (2) alpha characters immediately following the serial number. These alpha characters are part of the serial
number.

INTRODUCTION

The Wittco deluxe carving station series provide an efficient method for table top carving. They have
found wide acceptance in all types of food service operations. Buffets, country clubs, restaurants, hotels,
resort facilities, and casinos are all users of these dependable and useful carving systems.

This manual has been produced to provide persons responsible for the operation and maintenance of the
equipment with a simple but comprehensive understanding of its proper use. We recommend that this
manual be read and understood prior to placing the cabinet in operation.

As with any piece of food service equipment, this carving system will require a minimum of care and
maintenance. Suggestions for this procedure are contained in this manual and should become a regular
part of the operation of the unit.

NOTE: The carving system should be thoroughly cleaned in accordance with the instructions

contained in this manual.

It is recommended that prior to placing the carving system into operation that it be pre-heated at the
highest temperature setting for a period of 30-45 minutes.

Should repair or adjustment of the unit become necessary, we suggest that procedures described in this
manual be followed. The operator may also contact the authorized Wittco service agency. If the needed
repair occurs during the warranty period, prior authorization is required from Wittco by the service
company before the work is done.

It is our sincere desire that you obtain the maximum benefit from your Wittco carving system. If at any
time questions arise or additional information is required, contact Wittco at 800 367-8413.

DESCRIPTION

The Wittco carving system provide an efficient means of holding, displaying and carving of a variety of
prepared foods at proper serving temperatures. These units are provided with a removable carving board,
thermostatically controlled heated base, and overhead heat lamps.

UNCRATING

Each Wittco carving system is packed in a cardboard carton. When the carving system is received by the
operator, the carton should immediately be inspected for any sign of visible exterior damage. If carton is
punctured or dented, it may be an indication that the cabinet has sustained concealed freight damage.

It is very important that any evidence of damage be noted on the Bill of Lading at the time of
receipt.