Wittco 200-1-SL Service Manual

OPERATIONS
MAINTENANCE
MANUAL

DRAWER WARMERS SLIM

LINE SERIES

WITTCO MODEL NUMBERS

200-1-SL 200-1-SL-BI

200-2-SL 200-2-SL-BI

LIMITED WARRANTY

Wittco warrants the Products that it manufactures to be free from defects in materials and workmanship, under normal use and
service, for the periods indicated below from the date of purchase when installed and maintained in accordance with Wittco's written
instructions. Buyer must establish the "Products" purchase date by returning Wittco's Warranty registration Card or by other means
satisfactory to Wittco in its sole discretion.

Wittco warrants its Products to be free from defects in materials and workmanship from the date of purchase (subject to the
foregoing conditions) for the period(s) of time and on the conditions listed below:

a) Ninety (90) days Labor Warranty

b) One (1) Year Parts Warranty

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTAB1LITY OR FITNESS FOR A PARTICULAR
PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT. Without limiting the generality of the

foregoing, SUCH WARRANTIES DO NOT COVER: Coated incandescent light bulbs or heat lamps, all glass components. Product
misuse, tampering, misapplication, application of improper voltage, or recalibration of thermostats or high limit switches.

LIMITATION OF REMEDIES & DAMAGES

Wittco's liability and Buyer's exclusive remedy hereunder will be limited solely, at Wittco's option, to repair or replacement by a
Wittco authorized service agency (other than where Buyer is located outside of the United States or Canada, in which case Wittco's
liability and Buyer's exclusive remedy hereunder will be limited solely to replacement of part under warranty) with respect to any
claim made within the applicable warranty period referred to above. Without limiting the generality of the foregoing, all portable
Products, as defined by Wittco, shall be delivered by Buyer, at its sole expense, to the nearest Wittco authorized service agency for
replacement or repair. Wittco reserves the right to accept or reject any such claim in whole or in part. Wittco will not accept the
return of any Product without prior written approval from Wittco, and all such approved returns shall be made at Buyer's sole
expense. WITTCO WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES. FOR CONSEQUENTIAL OR INCIDENTAL

DAMAGES. INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST OF PRODUCTS AND LOSS OF PROFITS
RESULTING FROM THE USE OF OR INABILITY TO USE THE PRODUCTS.

WITTCO TECHNICAL & PRODUCT SUPPORT

TECHNICAL SUPPORT & SERVICE INQUIRES MAY BE DIRECTED TO WITTCO BY:

1. CALLING DIRECTLY TO:

WITTCO FOODSERVICE EQUIPMENT TECHNICAL & SERVICE DEPARTMENT - (800>

367-8413

8:00 AM - 4:30 PM (CENTRAL TIME)

2. FAXING DIRECTLY TO:

WITTCO FOODSERVICE EQUIPMENT TECHNICAL & SERVICE DEPARTMENT - (414)

354-2821

DAILY 24 HOURS

3. MAILING DIRECTLY TO:

WITTCO FOODSERVICE EQUIPMENT INC.
7737 NORTH 81ST. STREET
MILWAUKEE, WISCONSIN 53223 USA

WHEN DIRECTING INQUIRIES TO WITTCO PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE TO AVOID DELAYS

1. Wittco model number indicated on the equipment serial data plate located at the electrical connection.

2. Wittco serial number indicated on the equipment serial data plate. The equipment serial number will also have
two (2) alpha characters immediately following the serial number. These alpha characters are part of the serial
number.

INTRODUCTION

The 200 series of Slim-Line drawer warmers from Wittco Foodservice Equipment provide an efficient and sanitary
method of holding a variety of hot prepared foods.

This manual has been produced to provide persons responsible for the operation and maintenance of the equipment
with a simple but comprehensive understanding of its proper use and care. We recommend that this manual be read
and understood prior to placing the unit into operation.

NOTE: THE DRAWER WARMER SHOULD BE THOROUGHLY CLEANED IN ACCORDANCE

WITH THE INSTRUCTIONS CONTAINED IN THIS MANUAL PRIOR TO PUTTING INTO
SERVICE.

It is recommended that prior to placing the drawer warmer into operation that it be pre-heated at the highest
temperature setting for period of 30-45 minutes.

Should repair or adjustment of the unit become necessary, we suggest that procedures described in this manual be
followed. The operator may also contact the authorized Wittco dealer who sold the product or an authorized Wittco
service agency. If the needed repair occurs during the warranty period, prior authorization is required from Wittco by
the service company before the work is commenced.

It is our sincere desire that you obtain the maximum benefit from your Wittco heated drawer warmer system. If at any
time questions arise or additional information is required, contact Wittco at 800 367-8413.

DESCRIPTION

The Wittco 200 series of Slim-Line drawer warmers provide an efficient means of holding a variety of prepared hot
food products at proper temperatures until serving. The 200 Slim-Line series is provided with a large 12 X 20 X 4
steam table pan insert.

UNCRATING

Each Wittco drawer warmer system is packed in a cardboard carton. When the unit is received by the operator, the
carton should immediately be inspected for any sign of visible exterior damage to the carton. If the carton is punctured
or dented, it many be an indication that the unit has sustained concealed freight damage.

It is very important that any evidence of damage be noted on the Bill of Lading at the time of receipt.