WisyCom ACM50 User Manual

SN: ________________

Rev.02

Date: 01 February 2018

ACM50 User Manual

Battery Charger

Rev.02

ACM50 User Manual

INTRODUCTION

ACM50 is a lithium battery charger capable of charging up to 10 batteries simultaneously.

It has been designed to be easy to mount and dismount from your rack modules: despite the
big amount of battery charging spots, it occupy only one standard 19’’ rack unit and it is
incredibly light. ACM50 is a complete and professional charger, under each battery spot there
are two different led, Charge and Fault, that will keep you updated on what the status of the
battery pack is.

FEATURES:

 10 independent recharging battery slots
 Full control and management of each battery pack
 Extremely light and compact
 Less than two hours to charge up to 10 batteries

SAFETY INSTRUCTION

 Read this safety instruction and the manual first
 Follow all instructions and information.
 Do not lose this manual.
 Do not use this apparatus under the rain or near the water.
 Do not install the apparatus near heaters or in hot environments, do not use outside the

operating temperature range.

 Do not open the apparatus, only qualified service technician are enabled to operate on it.

The apparatus needs servicing when it is not properly working or is damaged by liquids,
moisture or other objects are fallen in the apparatus.

 Use only accessories or replacement parts authorized or specified by the manufacturer.
 Clean the apparatus only with dry cloths, do not use liquids.
 Report the serial number and the purchasing date in front of the manual. It is needed to

have proper replacement parts or accessories from the manufacturer.

 When replacement parts are needed, use only replacement parts authorized from the

manufacturer. Substitution with not authorized parts could result in electric shock, hazards
or fire.

 Keep attention on all the labels with warnings or hazards on the apparatus.