Wistron NeWeb WLANWARPLINKP Users manual

IEEE 802.11b WLAN PC Card

WarpLink 2411

User’s Guide

Version:1.08

Please install the Utility/Driver first
before inserting the PCMCIA Card.

1

FCC Class B Radio Frequency

Interference Statement

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

4. Consult the dealer or an experienced radio/television technician for help.

Notice 1:

Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

Notice 2:

Shielded interface cables, if any, must be used in order to comply with the emission limits.

Notice 3:

This device complies with part 15 of the FCC Rules. The operation is subject to the following two
conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause

undesired operation.

CAUTION: To comply with FCC RF exposure compliance requirements, a separation
distance of at least 2.5cm must be maintained between the antenna of this device and all
persons."

2

Table of Contents

1 Introduction...............................................................................................................................1

2 Installation.................................................................................................................................2

2.1 Overview .................................................................................................................................. 2

2.2 Install the IEEE802.11b WLAN Utility/Driver..............................................................................2

2.3 Install the PCMCIA card..........................................................................................................12

2.4 Utility Startup Configuration...................................................................................................... 13

2.4.1 Setting .............................................................................................................................. 13

2.4.2 Wireless LAN Neighborhood ............................................................................................. 15

2.5 Uninstall the IEEE802.11b WLAN Utility / Driver...................................................................... 17

3 Application...............................................................................................................................21

3.1 File Sharing in Microsoft Windows 98........................................................................................ 21

3.2 Printer Sharing in Windows 98.................................................................................................. 24

3.3 Using the shared folder............................................................................................................. 25

3.4 Using the shared network printer...............................................................................................25

4 Troubleshooting.......................................................................................................................26

4.1 Check the Various Properties of the Card..................................................................................26

4.2 Microsoft Networking Checklist................................................................................................ 26

4.3 Others..................................................................................................................................... 29

3

1 Introduction

Thank you for purchasing our IEEE802.11b WLAN PCMCIA Card. It will be
interoperable among IEEE 802.11b standard compliant products from other
manufacturers and allows you to build a wireless LAN. Besides, you can use your
PC to connect with an access point wirelessly to share the wired network resource:

a. Share your Internet access by using just one connection
b. Share printers and other peripheral devices
c. Share data and image files between networked PCs
d. Play multi-player games

IEEE802.11b WLAN can wirelessly transmit and receive data, minimizing the
need for wired connections, at a speed of up to eleven megabit per second. With
IEEE802.11b WLAN you can locate your PC wherever you want without wires and
cables.

IEEE802.11b WLAN provide LAN users with great mobility, which are not available
under wired network, for real-time information access at anywhere within a
reasonable distance.

The IEEE802.11b WLAN configuration is easy to change from peer-to-peer
networks, suitable for a small number of users, to full infrastructure networks of
thousands of users that allow roaming around a broad area.

Please read this manual to get familiar with the IEEE802.11b WLAN. This manual
contains detailed instructions in operation of this product. Please keep this manual
for future reference.

Kit Contents

The IEEE802.11b WLAN PC Card kit includes the following items:

a. A PCMCIA Card
b. A CD including:IEEE802.11b WLAN Utility & Driver software, Acrobat

Reader3.0 and user manual PDF file.

c. The User’s Guide (this document)

1

2 Installation

2.1 Overview

In this chapter we will cover how to install the IEEE802.11b WLAN PCMCIA Card.
To establish your wireless network connection, the following steps should be

executed.

1. Install the software using the installation CD

2. Install the wireless LAN card.

3. Install the required network protocols to communicate with your network. Most
likely, you will need the TCP/IP protocol.

The product is designed to operate in Windows 98SE, Windows Me, Windows
NT4.0 with Service Pack 3 or later and Windows 2000. And the installation
procedure is about the same. Please follow up the installation wizard that provided
by your system to install the software. The example here is based on Window
98SE.

2.2 Install the IEEE802.11b WLAN Utility/Driver

Please install the IEEE802.11b WLAN Utility/Driver first
before inserting the IEEE802.11b WLAN PCMCIA Card.

1. Insert the IEEE802.11b WLAN installation CD into your CD-ROM drive. The
setup program will then automatically start.

2. The setup program will start and the setup screen will appear on your monitor.
Select “ Next “ to go to the next screen.

2

3. Please carefully read the “ Software License Agreement. “ If you accept the
contract, click “ Yes “ to move to the next screen. If not, click “ No “ to
exit.

4. Please select the applications you would like to install, and click “ Next “ . If
you select “ Browse User Manual “ system will prompt a message to suggest
you installing Acrobat Reader.

3

5. Please choose your wireless device adapter, and click “ Next “ .

6. The default destination folder is displayed in the setup dialog box. To change
the default folder you can click “ Browse “ to set the destination folder. Click
“ Next “ to go to the next screen.

4

7. Select the Program Folder for IEEE802.11b WLAN Utility and click “ Next “ .

8. You will be asked if you want to add an IEEE802.11b WLAN Utility shortcut to
your desktop. Click “ Yes “ .

9. The user manual is published in Portable Document Format (PDF); we suggest
you install Acrobat Reader to read it. If Acrobat Reader doesn’t exist in your
system, a “ Question “ dialog box will prompt as follows. Select “ Yes “ to
install Acrobat for browsing user manual.

5

10. If you are sure to install Acrobat, click “ Yes “ and then system will guide
you to enter the Acrobat Reader 3.0 setup program. Follow the setup
procedure to complete the Acrobat Reader 3.0 installation.

11. The following page will remind you to install Microsoft network protocols for
IEEE802.11b WLAN to work properly. If the network protocol has existed in
your system, click “ No “ to the next page, otherwise click “ Yes “ to go to the
network setting and add the necessary protocols. Please refer to the session

4.2 Microsoft Networking Checklist for the detailed Microsoft network setting. If
you add the necessary protocols and finish the network setting, system will
prompt a reboot request and then click “ No “ to go to the next page.

6

12. The Driver and Help files will be copied to the system. Wait for the setup
program to finish the IEEE802.11b WLAN installation. Then select “ Yes “ and
click “ Finish “ to complete the installation. It’s recommended to close other
applications before rebooting your system.

13. To install the PCMCIA card, please refer to the chapter 2.3. “ Install the
PCMCIA card. “

7