Wistron NeWeb UPAST201 User Manual
ST-2 STARMATE REPLAY
SIRIUS Satellite Radio Plug and Play
User and Installation Guide
CONGRATULATIONS! Your new ST-2 Starmate Replay SIRIUS® Satellite Radio Plug and Play lets you
enjoy SIRIUS Satellite Radio’s digital entertainment in your vehicle, home, or boat. Use this guide to
familiarize yourself with all of ST-2’s features and capabilities. For the latest information about this and
other SIRIUS products, please visit http://www.siriusradio.com.
Table of Contents
Safety Precautions ........................................................... 4
FCC Warning .................................................................... 5
Cleaning the Receiver ....................................................... 5
Package Contents ............................................................ 6
Installation ....................................................................... 7
Location ....................................................................... 7
Mounting the Receiver ................................................. 7
nstalling the Magnetic Antenna ................................ 9
Connecting the Receiver ............................................ 12
Activating your SIRIUS Subscription ......................... 12
Optional Installation Kits ................................................. 14
Vehicle Installation Kit (ST-V2) .................................. 14
Home Kit (ST-H2) ....................................................... 14
ST-2 Starmate Replay Receiver Basic Operation .... 16
Controls and Features ............................................... 17
Remote Control .......................................................... 18
Installing Batteries in the Remote ............................. 18
Changing Channels .................................................... 19
Display Button (DISP) ............................................... 20
Selecting Channels Directly ...................................... 21
Advanced Features ...................................................... 21
Channel Presets (BAND) ........................................... 21
Storing Channel Presets ......................................... 21
Using Channel Presets ........................................... 22
Searching for a Channel Preset (P.TUNE Mode) .... 22
Memory (MEMO) and Song Seek
(S-Seek) Functions ................................................. 23
Storing Artist Names, Song Titles,
and Sports Teams to Memory .............................. 24
Viewing Stored Alerts Stored in Memory ................... 26
Deleting an Alert Stored into Memory ..................... 27
Activating the S-Seek Alert ..................................... 27
Jump Button ............................................................... 29
Game Alert ................................................................. 30
Instant Replay ............................................................ 30
Using Instant Replay ............................................... 32
2
ST-2 Starmate Replay User and Installation Guide
Table of Contents (continued)
FM Frequency Button ................................................ 36
Menu Options ................................................................ 37
FM Transmitter .......................................................... 37
FM Presets ............................................................. 37
FM On/Off ............................................................... 38
Game Alert ................................................................. 38
Settings ...................................................................... 40
Jump Settings ............................................................ 40
Traffic ....................................................................... 40
JumpSet .................................................................. 41
Display Options ......................................................... 42
Memory Options ........................................................ 42
Automatic Memory Search ..................................... 42
Clear All Memory ..................................................... 43
Auto Select ................................................................ 43
Audio Level ................................................................. 44
Confirmation Tone ...................................................... 44
Parental Control ......................................................... 44
Lock/Unlock ............................................................ 45
Edit Code ................................................................ 46
Time Based Features ................................................. 47
Clock ....................................................................... 47
Format ..................................................................... 48
ST-2 Starmate Replay User and Installation Guide
Time Zone ............................................................... 48
Daylight Savings Time ............................................ 48
Alarm ......................................................................... 49
Set Alarm ................................................................ 49
Alarm Time .............................................................. 49
Program Alert ............................................................. 50
Program Time/Day .................................................. 50
Channel Number ..................................................... 51
Program Alert On/Off ............................................... 51
Auto Shutdown .......................................................... 52
Sleep Mode ................................................................ 52
Signal Indicator .......................................................... 53
Factory Default .......................................................... 53
Troubleshooting ............................................................... 55
Specifications.................................................................. 56
12 MONTH LIMITED WARRANTY .................................. 56
© 2005 SIRIUS Satellite Radio Inc.
® “SIRIUS,” the SIRIUS dog logo, channel names and logos
are trademarks of SIRIUS Satellite Radio Inc. “NFL” and the
NFL Shield logo, and the NFL Sunday Drive name and logo are
registered trademarks of the National Football League. “NHL”
and the NHL Shield are registered trademarks of the National
Hockey League. “NBA” and the NBA silhouette logo are
registered trademarks of NBA Properties Inc. All other
trademarks, service marks and logos are the property of their
respective owners. All Rights Reserved.
3
Safety Precautions
Warning
Take the following precautions to prevent fire and
avoid personal injury:
• Be sure the Receiver is installed as described in
the Installation Guide.
• The use suggestions contained in this User Guide
are subject to any restrictions or limitations that
may be imposed by applicable law—the purchaser
should check applicable law for any restrictions or
limitations before installing and/or operating this
Receiver.
• Failure to follow these safety instructions and
warnings may result in a serious accident.
• To avoid short circuits, never put or leave any
metallic objects (coins, tools, etc.) inside the
Receiver.
• If the Receiver emits smoke or unusual odors, turn
the power off immediately.
• Do not drop the Receiver, or subject it to strong
shocks.
• If the LCD display on the Receiver becomes
damaged or broken, do not touch the liquid crystal
fluid. The fluid can be dangerous to your health. If
the liquid crystal fluid contacts your body or
clothing, immediately wash it off with soap and
water.
Caution
Take the following precautions to keep the Receiver
in proper working order:
• Do not open the Receiver.
• When replacing a fuse, use only a new one with
the proper rating. Using a fuse with the wrong
rating may cause the Receiver to malfunction.
• To prevent a short circuit when replacing a fuse,
first disconnect the wiring harness.
Note:
If the Receiver doesn’t seem to be working properly,
turn the Receiver’s power off, wait 5 – 10 seconds,
then turn the power on again.
4
ST-2 Starmate Replay User and Installation Guide
FCC Warning
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in this
User Guide. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
Note:
This equipment has been tested and found to
comply with Part 15 of the FCC Rules. These
rules are designed to provide reasonable
protection against harmful interference. This
equipment may cause harmful interference to
radio communications if it is not installed and
used in accordance with these instructions.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one of
more of the following measures:
ST-2 Starmate Replay User and Installation Guide
• Reorient or relocate the receiving antenna.
• Increase the separation between the other
equipment and the Receiver.
• Connect the other equipment to a different circuit
from that to which the Receiver is connected.
• Consult the dealer or an experienced radio
technician for help.
Warning
Do not operate the Receiver in a way that might
divert your attention from driving safely. As a driver,
you alone are responsible for safely operating your
vehicle in accordance with traffic safety laws at all
times.
Cleaning the Receiver
If the Receiver becomes dirty, turn its power off and
wipe it clean with a soft dry cloth. Do not use hard
cloths, paint thinner, alcohol, or other volatile
solvents to clean the Receiver. These may cause
damage to the plastic or remove indicator
characters.
5
Package Contents
The following items are packaged with the ST-2 Starmate Replay. Check the package to be all of the items
are included. If any of the items are missing, please contact the retailer where you purchased the product.
MEMO
DISP
MENU
BAND
P. TUNE
1 2 3 4 5 6 7 8 9 0
S-SEEK
001 Sirius Hits 1 001 Sirius Hits 1
U2U2
VertigoVertigo
POP 12:00PPOP 12:00P AA
tion
s
y
n
it
ara
f an
lsio
u
ep
g K
Starmate Replay
ST-2 Receiver
MUTE
e o
esives.)
r
c
h
em
n
rfa
ad
g
ow
n
a su
leanin
k
lyin
n
p
C
p
urface P
/ u
a
S
n
o clean
to
w
r
(T
o
rio
kn
p
Alcohol Swab
Suction Cup Mount
DISPMENU
MEMOBAND
1
4 5 6
7 809
+
–
2 3
Starmate Replay
Remote Control
& Screws
Mounting Plate
Magnetic Antenna
Cigarette Lighter
Power Cord
Rubber Antenna
Cable Cover/Tail
& Adhesive Strip
6
S
T
-2
S
T
A
R
M
A
T
E
R
E
P
L
A
Y
S
IR
IU
S
S
a
te
llite
R
a
d
io
P
lu
g
a
n
d
P
la
y
U
s
e
r G
u
id
e
ST-2 Starmate Replay User and Installation Guide
User Guide
Installation
Installation of your ST-2 Starmate Replay Receiver
is easy:
1. Choose a location in your vehicle where you will
mount the Receiver.
2. Mount the Receiver to the suction cup mount and
attach the suction cup portion of the mount to the
vehicle window.
4. Install the magnetic antenna on the roof of the
vehicle, and route the antenna cable to the
Receiver.
4. Connect the power cord for the Receiver to your
vehicle’s cigarette lighter.
5. Subscribe to the SIRIUS service and begin
enjoying the SIRIUS entertainment!
Location
Choose a location in your vehicle where the
Receiver will not block your vision, interfere with the
vehicle controls, or obstruct the air bag. The location
should be suitable for using the suction cup mount,
such as the windshield or other flat, smooth surface.
The location should be easily reachable and provide
good visibility of the Receiver.
ST-2 Starmate Replay User and Installation Guide
Mounting the Receiver
Attach the mounting plate to the suction cup mount
by using the provided bolts and hex nuts as shown
below. Be sure the large tab on the mounting plate is
facing up.
7
Place the Receiver into the mounting plate by first
placing the bottom of the Receiver into the tabs at
the bottom of the mounting plate (1), and then
pivioting the top of the receiver into the mounting
plate until it snaps into place (2).
1
2
Attach the suction cup mount to the vehicle
windshield, or other surface, as follows:
1. Clean the area where you are attaching the
suction cup with an alcohol wipe.
2. Lift up the cam lever on the suction cup mount as
shown.
3. Place the suction cup mount on the windshield, or
other area, and press the cam lever straight down
towards the suction cup to flatten the suction cup
as shown.
8
ST-2 Starmate Replay User and Installation Guide
4. Lock the cam lever down as shown.
performance from the antenna.
Sedan/Coupe
centerline of the vehicle roof, located at the rear of
the roof near the rear window.
: Mount the antenna along the rear
Installing the Magnetic Antenna
The optimum mounting location for the antenna is
on the roof of the vehicle, with a minimum
unobstructed area of 12 inches by 12 inches, and
exactly 6½ inches from the rear roof edge of the
vehicle (the length of the rubber antenna cable
cover/tail). It is important to avoid any obstructions
that will block the SIRIUS signal, obstructions such
as a roof rack, a sunroof, roof mounted cargo
containers, or other antennas.
The following illustrations show the recommended
mounting locations of the antenna for several types
of vehicles. Follow these recommendations for best
ST-2 Starmate Replay User and Installation Guide
SUV/Mini-Van:
centerline of the vehicle roof, located at the rear of
the roof near the rear door/hatch.
Pickup Truck
centerline of the cab roof, located at the rear of the
roof near the rear window.
Mount the antenna along the rear
: Mount the antenna along the rear
9
Convertible
of the trunk lid, with the rubber antenna cable cover/
tail directed toward the rear window.
: Mount the antenna along the centerline
cable cover/tail in the selected mounting area and
route the cable from the antenna to the vehicle’s
interior by tucking it underneath the rubber molding
around rear window, as shown.
Clean the area where the antenna and rubber
antenna cable cover/tail will be mounted with the
supplied alcohol swab.
Connect the rubber antenna cable cover/tail to the
antenna cable, making sure that the strain-relief on
the antenna seats into the rubber antenna cable
cover/tail groove. Route the antenna cable through
the wire channel in the rubber antenna cable cover/
tail. Do not yet attach the adhesive strip.
Temporarily position the antenna and rubber antenna
10
Route the cable from the lowest point of the rear
window into the trunk. Take advantage of any
existing cable channels or wiring conduits. For
SUVs, mini-vans & 5-door vehicles, bring the cable
into the vehicle under the rubber molding for the
tailgate, and continue under the interior trim.
From the trunk, or rear of the vehicle, route the
cable around the passenger compartment and to
the front of the vehicle, to the receiver. Take care not
pull the cable across sharp edges that could
damage it, and keep it away from areas where it
ST-2 Starmate Replay User and Installation Guide
might entangle feet. Coil any excess antenna cable
in a location where it can be hidden.
Once the antenna cable is routed through the
vehicle, and you are satisfied with the cable routing,
peel the yellow protective material from the
adhesive strip and adhere the adhesive strip to the
rubber antenna cover/tail. Next peel the red
protective material from the adhesive strip and
press the rubber antenna cable cover/tail firmly into
place on the vehicle.
PROTECTIVE MATERIAL
(RED SIDE)
ADHESIVE
STRIP
ANTENNA
(UNDERSIDE)
Double check that the location of the antenna and
rubber antenna cable cover/tail are correct, and
continue to press firmly down on rubber antenna
cable cover/tail for another 30 seconds.
RUBBER ANTENNA
CABLE COVER/TAIL
VEHICLE
MOUNTING SURFACE
ANTENNA
CABLE
RUBBER ANTENNA
CABLE COVER/TAIL
ST-2 Starmate Replay User and Installation Guide
Note: At room temperature (68 degrees), maximum
adhesion usually occurs within 72 hours. During this
period, avoid car washes and other contact with the
antenna and rubber antenna cable cover/tail.
11
Connecting the Receiver
A
Connect the antenna and cigarette lighter power
adapter to the Receiver to complete the installation.
The illustration below shows the location of the
antenna and power connectors on the Receiver.
NTENNA
FM OUT
AUDIO OUT
POWER
Plug the cigarette lighter power adapter cord into
your vehicle’s cigarette lighter, and turn the Receiver
On by pressing the power button. Once you have
verified that Receiver has powered on, you can
proceed with activating your SIRIUS subscription.
12
Activating your SIRIUS Subscription
Before you can listen to the SIRIUS service, you
need to subscribe to the SIRIUS Satellite Radio
service.
1. Be sure that the Receiver is correctly installed
and that the antenna is oriented to receive the
SIRIUS signal.
2. Press the power button to turn Receiver On.
After displaying the SIRIUS logo, the Receiver
will update the SIRIUS channel line up. The
display will show, “UPDATING CHANNELS” and
show the status of the update.
Updating Channels
X% Completed
Wait until the channel updates have completed
before pressing any buttons on the Receiver.
3. Once the channels have been updated, the
display will change to “Call 1-888-539-SIRIUS to
Subscribe” and will place you in SIRIUS Satellite
Radio’s Preview Channel, channel 184.
You will not be able to tune to any other
ST-2 Starmate Replay User and Installation Guide
channels until you activate your SIRIUS
subscription.
184
To Activate CallTo Activate Call
1-888-539-SIRIUS1-888-539-SIRIUS
News 12:00P A
Preview
4. To listen to the audio from your Receiver, you will
need to tune the FM radio in your vehicle and the
FM transmitter in the Receiver to the same FM
frequency. The FM transmitter in the Receiver
defaults to 88.1 MHz, so you can begin by tuning
your FM radio to 88.1 MHz. If there is an FM station
broadcasting on that frequency, you will have to
search for a quiet frequency to use. Refer to the
section titled,
FM Transmitter
in this User Manual
for instructions on how to tune the FM transmitter
to other FM frequencies.
5. Using the channel up and down buttons, tune
the Receiver to channel 000 to display the
Receiver’s unique 12-digit SIRIUS ID Number
(SID). (This SID number is also available on the
ST-2 packaging.) Write the SID number down in
the space provided at the end of this manual.
000
SIDSID
012345678912012345678912
12:00P
6. Have your credit card handy and contact SIRIUS
on the Internet at:
https://activate.siriusradio.com/
and follow the prompts to activate your
subscription. You can also call SIRIUS toll-free
at:
1-888-539-SIRIUS (1-888-539-7474)
7. When you have successfully subscribed to the
SIRIUS service, and the Receiver has been
updated with your subscription information, an
alert will be displayed.
001
Subscription Updated
Artist NameArtist Name
Press Any Key
Song TitleSong Title
Category 12:00P A
Channel Name
To continue, press any key on the Receiver.
The installation of your Receiver is now complete,
and you are ready to begin enjoying SIRIUS Satellite
Radio’s digital entertainment!
ST-2 Starmate Replay User and Installation Guide
13
Optional Installation Kits
There are two optional installation kits which may be
purchased for use with your ST-2 Starmate Replay
Receiver, a Vehicle Installation Kit (Model # ST-V2),
and a Home Kit (Model # ST-H2). These kits may be
purchased from your SIRIUS Satellite Radio retailer.
Vehicle Installation Kit (ST-V2)
The optional vehicle installation kit provides
additional items for a more permanent installation in
your vehicle. The kit consists of the following items:
DIN-compatible Install Plate
Receiver in the dashboard of your car or boat.
Power Harness
Receiver to the vehicle’s electrical system.
FM Switching Box
the Receiver into the FM antenna input of your
vehicle’s radio. This box will automatically switch off
the vehicle’s FM antenna when you turn on your
SIRIUS Receiver.
Audio Cables
the Receiver into your vehicle’s audio system.
- for connecting the power for the
- for connecting the FM output of
- For connecting the audio output of
- for installing the
Home Kit (ST-H2)
The optional home kit allows you to enjoy the SIRIUS
Satellite Radio’s digital entertainment in your home,
by allowing you to take your Receiver from your
vehicle into your home. The kit consists of the
following items:
Stand
- A stand into which to snap your Receiver
while being used in your home.
AC Adapter
Receiver in the home.
Audio Cables
powered speakers, or your home entertainment
system.
Home Antenna
your Receiver while in your home.
- A power adapter to power your
- Cables to connect the Receiver to
- A SIRIUS antenna to connect to
14
ST-2 Starmate Replay User and Installation Guide
ST-2 Starmate Replay User and Installation Guide
15
ST-2 Starmate Replay Receiver Basic Operation
16
14
13
12
11
1
MENU
001 Sirius Hits 1 001 Sirius Hits 1
5432 6
MEMO
S-SEEK
U2U2
VertigoVertigo
POP 12:00PPOP 12:00P AA
BAND
P. TUNE
1 2 3 4 5 6 7 8 9 0
10
7
DISP
8
9
ST-2 Starmate Replay User and Installation Guide
Controls and Features
1. POWER Button : Turns the Receiver’s power
On and Off.
2. Rewind Button: Used to rewind through a
broadcast saved in Instant Replay.
3. Play/Pause Button: Pause Function: Used to
pause a broadcast for Instant Replay. Play
Function: Used to play a broadcast saved in
Instant Replay.
4. Fast Forward Button: Used to fast forward
through a broadcast saved in Instant Replay.
5. MEMO (Memory) Button (S-Seek Function):
Saves and recalls artist names, song titles, and
sports teams. Holding the button down enters the
S-Seek mode.
6. DISP (Display) Button: Toggles display between
the default display screen and large screen display
mode. Holding the DISP button down switches the
display to the channel list mode.
7. Select Button: Selects items highlighted on the
display screen.
8. Channel Up/Down Buttons: Navigates through
channels and display screens, and highlights items
ST-2 Starmate Replay User and Installation Guide
on the display.
9. Category Previous/Next Buttons: Navigates
through the category list screen which displays
SIRIUS channel categories.
10. Preset Number Buttons (0-9): Sets and selects
preset channels. Also used to directly tune
channels by entering the channel number.
11. BAND Button (P.Tune): Pressing and releasing
switches between the five preset banks (A, B, C),
which hold ten presets each. Pressing and holding
enables “Preset Tune Mode”, which allows for
viewing and listening of stored presets with the
channel up/down buttons.
12. FM Preset Button: Selects between preset FM
frequencies used for the built-in wireless
transmitter.
13. Jump Button: Used to quickly switch between the
current channel and a favorite channel.
14. MENU Button: Used to access menu options to
make setup and feature changes.
17
Remote Control
4
5
6
7
8
2
1
16
15
14
13
12
11
10
Installing Batteries in the
Remote
1
4 5 6
7 809
1. Remove the battery cover.
2. Install CR2025 battery.
(+ positive side is up)
3. Replace the battery cover.
DISPMENU
MEMOBAND
2 3
3
MUTE
+
–
18
1. Power Button
: Turns the Receiver power On and Off.
2. Category Previous/Next Buttons: Navigates through categories.
3. MUTE Button: Mutes the audio.
4. Channel Up/Down Buttons: Navigates through channels and display screens.
5. Rewind Button: Used to rewind through a broadcast saved in Instant Replay.
6. Play/Pause Button: Pause Function: Used to pause a broadcast for Instant
Replay. Play Function: Used to play a broadcast saved in Instant Replay.
7. Fast Forward Button: Used to fast forward through a broadcast saved in Instant
Replay.
8. +/- Volume Buttons: Adjusts the audio volume up & down.
9. Number Buttons (0-9): Used for directly selecting channels and for presets.
10. MEMO (Memory) Button: Saves and recalls artist names, song titles, and sports
9
teams. Holding this button down enters the S-Seek mode.
11. BAND Button: Switches between preset bands A , B, and C.
12. MENU Button: Used to access menu options to make setup and feature changes.
13. DISP Button: Toggles display between the default display screen and large screen
display mode. Holding this button down switches to the channel list mode.
14. Jump Button: Used to quickly switch between the current channel and a favorite
channel.
15. FM Preset Button: Selects between preset FM frequencies used for the built-in
wireless transmitter.
16. Select Button: Selects items highlighted on the display screen.
ST-2 Starmate Replay User and Installation Guide
Loading...