Wistron NeWeb DFCN2 User Manual
USER MANUAL
DFCN2 NFC MOUDULE
USER MANUAL & Operational description
USER MANUAL
I. Introduction
DFCN2 is a kind of NFC (Near Field Communication) module that could be embedded in one IT system
by simply connecting the module to his target microcontroller and start developing his application
software.
II. DESIGNREFERENCE
DFCN2 reference design module consists of the following:
• Reference Design:
When the user wishes to incorporate the DFCN2 to their device, it is strongly recommended that this
reference design is copied “as is” in the final application board to guarantee optimum performance,
regulatory compliance and lowest development time and design effort.
• MCU FPC/FFC Connector:
Allow user to connect the DFCN2 module to the host board via FPC/FFC connector.
• Antenna Connector:
Connected to FPC antenna, please note that matching circuitry should designed on antenna.
III. FEATURE
Contactless protocols:
• ISO14443 A/B
• ISO15693
• ISO18092
Contactless transmission of data and RF energy
Peer-to-peer communication
Card emulation
NFC card reader/writer
Programmable receiver sensitivity
Carrier frequency: 13.56 MHz
USER MANUAL
RF Field detection
Single ended external antenna connection
IV. OperationConditions
Supply voltage AC mains DC
Type of DC Source Internal DC supply External DC adapter Battery
Operational Climatic
Tnom (20°C) Tmax (55°C) Tnim (-20°C)
V. Assembly Guidelines
Loading...