Page 1
Specification
V
ersion
Change history
Date
0.1
Preliminary release
201
8/09/05
UMC-A18QA-V Product
UMC-A18QA-V LGA-type LTE Module
User Manual
Wistron NeWeb Corp.
啟碁科技股份有限公司
啟碁科技股份有限公司
啟碁科技股份有限公司啟碁科技股份有限公司
Revision History
CONFIDENTIAL
THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION, WHICH IS THE
PROPERTY OF THE WISTRON NEWEB CORPORATION AND SHALL NOT BE DISCLOSED TO OTHERS IN
WHOLE OR IN PART, REPRODUCED, COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING,
OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION OF WISTRON NEWEB CORPORATION.
Page 1
Page 2
Specification
A.
Product Description ......................................................................................... 3
B.
Main Features ................................................................................................. 6
UMC-A18QA-V Product
C O NTENTS
B.1 Application interface features ......................................................................................... 7
B.2 Packet mode features ..................................................................................................... 7
B.3 LTE features ..................................................................................................................... 7
B.4 Short Message Service (SMS) features ............................................................................ 7
B.5 RF Specification ............................................................................................................... 7
E.
Mounting considerations ................................................................................. 9
F.
Mechanic Specifications ................................................................................. 10
G.
Package Specifications ................................................................................... 12
H. Label Form.................................................................................................... 12
I.
Electrostatic discharge (ESD) ........................................................................... 12
Page 2
Page 3
UMC-A18QA-V Product
Specification
A. PRODUCT DESCRIPTION
© Wistron NeWeb Corporation
THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND
IS THE EXCLUSIVE PROPERTY OF WNC AND SHALL NOT BE DISTRIBUTED,
REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN
PERMISSION FROM WNC.
LIMITATION OF LIABILITY
THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PURELY FOR
DESIGN REFERENCE AND SUBJECT TO REVISION BY WNC AT ANY TIME. NOTHING IN
THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY WARRANTY OR RIGHT TO
USE THE MATERIAL CONTAINED HEREIN WITHOUT WNC’S PRIOR EXPRESS WRITTEN
CONSENT. WNC SHALL NOT BE LIABLE FOR ANY USE, APPLICATION OR
DEVELOPMENT DERIVED FROM THE MATERIAL WITHOUT SUCH PRIOR EXPRESS
WRITTEN CONSENT.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiated radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
Page 3
Page 4
UMC-A18QA-V Product
Specification
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains FCC ID:
NKRA18QA-V”. The grantee's FCC ID can be used only when all FCC compliance requirements are
met.
RF Exposure Information
This device is intended only for ODM/OEM integrators under the following conditions:
(1) The antenna must be installed such that 20cm is maintained between the antenna and users,
(2) The transmitter module may not be co-located with any other transmitter or antenna.
(3) To comply with FCC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile exposure
condition must not exceed:
Standalone Condition:
3.0 dBi in 700 MHz Band
5.3 dBi in 1700 MHz Band
IMPORTANT NOTE:
This module is intended for ODM/OEM integrator. The integrator is still responsible for the
FCC compliance requirement of the end product, which integrates this module. 20cm
minimum distance has to be able to be maintained between the antenna and the users for
the host this module is integrated into. Under such configuration, the FCC radiation exposure
limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
Page 4
Page 5
UMC-A18QA-V Product
Specification
In the users manual of the end product, the end user has to be informed to keep at least
20cm separation with the antenna while this end product is installed and operated. The end
user has to be informed that the FCC radio-frequency exposure guidelines for an
uncontrolled environment can be satisfied. The end user has to also be informed that any
changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment. If the size of the end product is smaller than 8x10cm,
then additional FCC part 15.19 statement is required to be available in the users manual:
This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Figure1: UMC-A18QA-V LGA-type LTE Module
A.1 General Descriptions
This document describes the specifications of UMC-A18QA-V LGA LTE Module. This
module is based on Qualcomm MDM9207-0 platform and capable to allow users
enjoying high speed internet access anywhere and anytime over 4G LTE broadband
network.
With integrating UMC-A18QA-V module, the end products are enhanced in both
functionality and usability based on leading edge mobile wireless technology.
This document will introduce hardware, software, mechanical and environmental
specifications in following sections.
Page 5
Page 6
UMC-A18QA-V Product
Specification
Product information:
Part Number Category LTE GNSS Footprint Dimension
UMC-A18QA-V CAT4 B4, B13 GPS LGA 263 pads 28.5x23.5x2.3mm
A.2 Applicable Device
WNC UMC-A18QA-V module is a high speed
LTE
modem with LGA form factor
and is focusing on the gateway, notebook, tablet and other portable device or
M2M marketing.
Notebook
Tablet
Mobile Internet Device
Wireless Router
Wireless Multimedia Device
Wireless M2M solution
B. MAIN FEATURES
Support 1.8/3.0V USIM
Operation System (OS) Support - Linux (device driver)
Certification
GCF/Verizon (in plan)
FCC (in plan)
Operating Ambient Temperature
Operating : -30°C ~ +70°C
-20°C~+60°C: full functions compliant with 3GPP
-30°C~+70°C: functional workable
Page 6
Page 7
UMC-A18QA-V Product
Specification
Storage : -40°C ~ +85°C
B.1 APPLICAT ION IN TERFACE FEATU RE S
WNC MAL (Modem Abstraction Layer) Manager SDK for Linux
B.2 PACKET M O D E FEATURES
LTE data rates with category 4 (UMC-A18QA-V)
150 Mbps DL with 20 MHz bandwidth
50 Mbps UL with 20 MHz bandwidth
B.3 LTE FEATU RE S
3GPP LTE Release 10
Bandwidth support 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz per
3GPP standard
VoLTE
IPv4 and IPv6 supported
LTE Rel-10 MDT with location information
B.4 SHORT ME S SA GE SERVICE (SMS ) F E AT URES
SMS over SGs
SMS over IMS
B.5 RF SPECIFI CA TION
Page 7
Page 8
UMC-A18QA-V Product
E-UTRA
Band 4
1710
MHz
-
1755
MHz
2110
MHz
-
2155
MHz
Band 13
777 MHz
-
787 MHz
746 MHz
-
756 MHz
Channel Bandwidth
(CHBW)
1.4 MHz
3
MHz
5
MHz
10
MHz
15 MHz
20 MHz
Yes Yes Yes Yes
Band 13
Yes1
Yes1
Parameter
B4,
B13 Max TX Power
QPSK
-
1RB#0
, 10MHz
dBm
20.3
25.7
LTE Band
Items
Parameter
Min Typ Max
Unit
Specification
Cellular Frequency Band
Uplink Frequency
Operating Band
LTE Channel Bandwidth
E-UTRA
Operating Band
Band 4 Yes Yes
UE Transmit
Downlink Frequency
UE Receive
Note 1: refers to the CHBW for which a relaxation of the specified UE receiver
sensitivity requirement is allowed as defined in section 7.3 of 3GPP TS 36.101.
LTE Max. TX Output Power
LTE Band Items
Partial RB
Unit Min Typ Max
Note: The RF Transmit Specification is defined at the LGA pad.
LTE Reference Sensitivity
Band 4 Receive Sensitivity 10MHz
Band 13 Receive Sensitivity 10MHz
-97.0 dBm
-94.0 dBm
Page 8
Page 9
UMC-A18QA-V Product
Specification
Note: The RF Receive Specification is defined at the LGA pad.
GPS Receive Specifications
The GPS is an optional feature in UMC-A18QA-V, depending on additional request.
E. MOUNTING CONSIDERATIONS
Reflow soldering profile:
Profile Min. Max. Unit
Preheat time from140°C to 190°C 70 105 S
Page 9
Page 10
UMC-A18QA-V Product
Specification
Time maintained above 230°C 40 60 S
Peak package body temperature 230 250 °C
Time maintained above 217°C 60 90 S
F. MECHANIC SPECIFICATIONS
Dimension: 28.5mm [L] x 23.5mm [W] x 2.3mm [H]
PCB FOOTPRINT (Top View)
Page 10
Page 11
Specification
UMC-A18QA-V Product
Module Dimension (Top and Side View)
Page 11
Page 12
UMC-A18QA-V Product
Specification
G. PACKAGE SPECIFICATIONS
Tape & Reel
H. LABEL FORM
Dimension : 19mm * 19mm (example as shown below)
I. ELECTROSTATIC DISCHARGE (ESD)
+/- 2KV
Page 12
Page 13
Specification
UMC-A18QA-V Product
S
20 Park Avenue II,
Hsinchu Science Park,
Hsinchu 308, Taiwan, R.O.C.
TEL: 886-3-666-7799
FAX: 886-3-666-7321
Website: http://www.wnc.com.tw
Page 13
Loading...