Wisconsin Bench Mfg QSLOB7083-FX-25 User Manual
LOBO Tables
Laminate/Phenolic & 1 Pc Butcherblock Tops
Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identier Key on next page) Any parts damaged during
shipment must be reported within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Step 1:
• Place the LOBO top face down on a protected at
surface.
Step 2:
• Place LOBO frame tabs down on top of the LOBO top and
align with pre-drilled pilot holes.
• If assembling a Stainless Steel top, see Stainless Steel
LOBO Table Assembly Instructions.
• If assembling an Epoxy top, see Epoxy LOBO Table
Assembly Instructions.
• If assembling a 2 piece Hardwood top, see Hardwood
LOBO Table Assembly Instructions.
Step 3:
• Starting at one corner, place the ⁄” bolt that is welded
to leg through corner support brace of frame. Repeat for
remaining legs.
Step 4:
• Using a # R2 square bit, secure the leg plate to the top
with #10 x ¾” square pan screws. Repeat for each leg
plate.
Steps 3
Steps 5
Step 5:
• Place the ⁄” lock washer and ⁄” hex nut onto the leg
bolt and tighten with ½” wrench. Repeat on remaining
legs.
• Adjust the leg to desired height.
Step 6:
• Using a # R2 square bit, secure frame to table top with
#10 x ¾” square pan screws. One screw per tab.
Step 7:
• With someone’s help, turn table upright.
Tools Required
• ½” wrench
• Screw gun
• # R2 square bit
• ⁄” hex bit
wibenchmfg.com
Step 4
Step 6
V031919 subject to change.
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
1
Laminate/Phenolic & 1 Pc Butcherblock Tops
Part Identifier Key
Part # Description Qty.
#10 x ¾” Square pan screws
0408231
(Used to attach leg plates to laminate top)
(Used to attach frame to laminate and SS tops)
(Included in Hardware Pack located in leg box. May
need less depending on size and work service)
LOBO Tables
26
Hardware Pack
040379
⁄” Lock washers
⁄” Hex nuts
(Used to attach legs to frame)
3” Heavy Duty Caster Hardware Pack (04066968) Used only with 2” adj. legs (-ALR & -ABP)
Part # Description Qty.
04067460
04067064
¼” Star washers
M6 1x18 screws
(Used in leg insert to prevent bending of the leg insert)
(Included in Hardware Pack located in leg box as
standard. Discard if casters are not installed.)
3” Heavy Duty Caster Hardware Pack (0402020) Used only with 1.5” adj. legs (-ADJ)
04067460
0401259
¼” Star washers
M6 1x14 screws
(Used in leg insert to prevent bending of the leg insert)
(Included in Hardware Pack located in leg box as
standard. Discard if casters are not installed.)
4
4
4 per set
4 per set
4 per set
4 per set
LOB -ADJ
LOB -ABP
LOB -ALR
LOB -FX
wibenchmfg.com
LOBO Legs
Adjustable Legs
Model #
LOB -ADJ 0409195-G4 0409195 LOBO 1.5" (40mm) Square Adj. Leg 18 22 - 36.6
LOB -ALR 0409193-G4 0409193 LOBO 2" (50mm) Round Adj. Leg 20 22.25 - 36.25
LOB -ABP N/A 0409196 LOBO 2" (50mm) Big Paw Sq. Adj. Leg 20 22.25 - 36.25
Smooth Silver
Sku #
Fixed Legs
Model #
LOB -FX 0409194-G4 0409194 LOBO 1.5" (40mm) Square Fixed Leg 16 28.5
Smooth Silver
Sku #
Black
Sku# Descripon Weight Height"
Black
Sku# Descripon Weight Height"
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
2
Loading...