Wiremold WSPC220BK User Manual

WIREMOLD

Table Boxes

Table Boxes bring technology to the point-of-use

Table Boxes bring technology into the
user’s work area. Routing of power,
communications and A/V connectivity to
the work surface needs to be unobtrusive
with maximum accessibility and flexibility.
Our wide range of table box solutions
offer the flexibility to meet the connectivity
and power configurations requirements
needed to run business smoothly, while
enhancing the overall room appearance.
From desks to lab benches, table boxes
make technology easily accessible to
the user.

A TableSource Table Box installed in a typical work surface application.

®

FEATURES & BENEFITS

n Range of solutions. Table Boxes allow you to access

services on, above or below the work surface with cord­ended or field-wired options. Standard off-the-shelf, field
configurable or custom configurations are available to meet
any work area need.

n Variety of applications. Office workstations, conference

rooms, even home offices can increase productivity by
bringing access to connections up to the work surface.

n Safety. Wiremold Table Boxes meet U.S. and Canadian

safety standards.

n Aesthetics. Elegant yet functional access to services

includes cover style and color options to meet room
décor. Built-in cable management with easy to install and
replaceable retractors for communications and USB cables
keeps the work surface clear.

n Ease of installation. From placing a cord-ended unit in

an existing desk grommet, clamping on the edge of a
table, or using the supplied template to create the cut out,
Wiremold Table Boxes are made easy to install so you can
get back to business.

Clockwise from the left: deQuorum™ Flip-Up Table Box, TableSource™ Table Box,
Desktop Power Center Slim, Desktop Power Center with Surge and Desk Module.

ED1706R7 – Updated October 2017 – For latest specs visit www.legrand.us/wiremold

Table Boxes Quick Selection Guide

TABLE BOX MODEL

TableSource
Table Boxes

(Standard Model)

TableSource
Table Boxes

(Configurable Model)

deQuorum
Flip Up
Table Boxes

SVC. LOCATION

@ TABLE

Above 6' Clear Anodized

Above 2'-12' Clear Anodized

Flush 6' Black, Stainless (1) 15A or 20A

CORD

LENGTH

FIELD WIRED

OPTION

Yes

Yes

Yes

COVER COLOR/

MATERIAL

Aluminum

Aluminum

ELECTRICAL

OUTLETS

(1) 15A Duplex,

(1-4) 15A Duplexes

Gasketed, USB

Duplex,

(1) USB Duplex

Receptacle

USB

USB POWER

RATING

2.4A

2.4A

3.1A

DATA

OPENINGS

2 Openings with

Adapters for

Ortronics®
Series II, TracJack
or Wiremold Open

System devices

1-4 Openings

with Adapters for

Ortronics®
Series II, TracJack
or Wiremold Open

System devices

Adapters for

Ortronics® Series

II, TracJack or
Wiremold Open
System devices

Desktop Power

Above 6' Matte Black or

Center Slim

Desktop Power

Above 6' Black with

Center w/Surge

Desk Module

*

Extron® Electronics MAAP modules are sold separately

Flush 12' Brushed Silver

No

No

No

Gloss White with

Gray Face

Magnesium Side

Panels

with Black

Covers

.

(2-3) 15A Outlets

with (2) USB

Charging Outlets

(3) 15A Outlets

with (2) USB

Charging Outlets

(1) 15A Duplex RJ45

3.1A

2.1A

0.7A

N/A

N/A

(Retractor available)

2

TableSource™ Table Boxes

TableSource™ Table Boxes provide effortless work
surface accessibility for power and communication.
They are offered in a range of standard or custom
configured product. TableSource Table Boxes
can be easily added to any work area and require
minimal, adaptable installation.

CODE REFERENCE

Cord-Ended TableSource:
cULus Listed Relocatable Power Tap:

File E66421 Guide XBYS

Hard-Wired TableSource:
cULus Listed Multioutlet Assembly:

File E15191 Guide PVGT

Listed to US & Canadian Safety Standards
Meets Article 380 of NEC

TABLESOURCE TABLE BOXES COLOR OPTIONS

Standard TableSource Table Boxes are available in
a clear anodized aluminum finish. Other finishes are
available for configurable units. Consult the configurator
located on the next page.

TableSource Table Boxes Ordering Information

TableSource Activations in
this chart are packaged with
a mounting clip that attaches
to the work surface and a
hardware bag of adapters that
allows the communication
openings to accept either
Ortronics Series II, TracJack or
Wiremold Open System.

15 1/2"

(393.7mm)

2 3/8"

(60.33mm)

2"

(50.8mm)

CATALOG

NUMBER

TSAX1F0AL1U

TSAX1F1AL1U

TSAX1F2AL1U

TableSource™ Table Boxes provide flexibility in décor, datacom connectivity
options, and installation to meet specific functional and aesthetic needs.

CORD

LENGTH

COMM.

OPENINGS

FINISH

Clear

Anodized

Clear

Anodized

Clear

Anodized

UNIT LENGTH

INCHES (MM) FEET (MM)

13" (330.2mm) 1 6' (1.83m) 0

15 1/2" (393.7mm] 1 6' (1.83m) 1

18 5/32" (461.2mm) 1 6' (1.83m) 2

15A

DUPLEX

TableSource Activations in
this chart are packaged with a
mounting clip that attaches to
the work surface and a hardware
bag of adapters that allows the
communication openings to accept
either Ortronics Series II, TracJack
or Wiremold Open System.

15 1/2"

(393.7mm)

2 3/8"

(60.33mm)

2 3/8"

(60.33mm)

2"

(50.8mm)

Accommodates
Surface Thicknesses
from 0.7" to 1.9"
(18mm to 48mm)

CATALOG

NUMBER

TSAM1F0AL1U

TSAM1F1AL1U

TSAM1F2AL1U

FINISH

Clear

Anodized

Clear

Anodized

Clear

Anodized

3

UNIT LENGTH

INCHES [MM] FEET [MM]

13" (330.2mm) 1 6' (1.83m) 0

15 1/2" (393.7mm) 1 6' (1.83m) 1

18 3/32" (461.2mm) 1 6' (1.83m) 2

15A

DUPLEX

CORD

LENGTH

COMM.

OPENINGS

Design a Cord-Ended
TableSource Table Box

TableSource™ Table Boxes Configurator

Sample Part: TSAM2H1IV2U

IMPORTANT

Use this chart to configure
your own custom TableSource
activation. Many of the
configurations are standard
offerings, and can be quoted
and delivered to you quickly
with the help of our Wiremold
Customs group. Just call in with
your TableSource part number,
and they will be able to supply
you with a quote, technical
specifications and a CAD
Drawing.

Data Cables egress out the back
(the side opposite the devices).

NOTE: Wiremold Open System, Ortronics Series II and TracJack modules

provided with all assemblies.

T S

L L

Product

Group

1. Select face for
mounting device.
Input letter.

A Face

B Face

L L

Face

Mounting

of

Bracket

Unit

A,B

M, X

2. Do you want optional
mounting bracket
for backsplash
application?

Backsplash

Bracket

Clip

M

X

Moun ting

#

No. of

Duplexes

1-4

3. Number of
duplexes
(from 1-4).
Input number.

4. Choose a length and input

L

Power

Cord

Length

the corresponding letter for
that length.

Length Code
Feet [metric] Letter

2 [0.6m] B
3 [0.9m] C
4 [1.2m] D
5 [1.5m] E
6 [1.8m] F
7 [2.1m] G
8 [2.4m] H
9 [2.7m] I
10 [3.0m] J
11 [3.4m] K
12 [3.7m] L

NOTE: Cord color is black.

#

No. of

Comm.

Adapters

1-4

5. Choose
number of
communication
adapters (from
1-4). Input
number.

L L

Color of Product

WH- Painted White with

black devices

BK- Painted Black with

Black devices

IV- Painted Ivory with

black devices

AL- Anodized Aluminum

with gray devices

6. Choose color
of activation
and devices.
Input two-letter
color code.

7. Choose number
of USB modules.
Input a number
followed by "U"

#U = Number of USB

L L

1U, 2U, etc.

Modules

Design a Hard-Wired

Sample Part: TSAP2Z1BK2UG

TableSource Table Box

IMPORTANT

Use this chart to configure
your own custom
TableSource activation.
Many of the configurations
are standard offerings, and
can be quoted and delivered
to you quickly with the help
of our Wiremold Customs
group. Just call in with your
TableSource part number,
and they will be able to
supply you with a quote,
technical specifications and
a CAD Drawing.

Data Cables egress out
the back (the side
opposite the devices).

NOTE: Wiremold Open System, Ortronics Series II and TracJack modules

provided with all assemblies.

T S

L L

Product

Group

1. Select face for
mounting device.
Input letter.

A Face

B Face

L

Face

of

Unit

A, B

2. Mounting styles

A Face

L

Mounting

Syle

T, P

T – Mounting Ears

P – Mounting Stud

B Face

#

No. of

Duplexes

1-4

3. Number of
duplexes
(from
1-4). Input
number.

#

L

No. of

Whip

Comm.

Exit

Adapters

Y, Z

4. Choose face for 6'
[1.8m], three-wire
whip to exit.

Y STYLE

Z STYL E

1-4

5. Choose
number of
communication
adapters (from
1-4). Input
number.

L L

Color of Product

WH- Painted White with

black devices

BK- Painted Black with

Black devices

IV- Painted Ivory with

black devices

AL- Anodized Aluminum

with gray devices

6. Choose color of
activation and
devices. Input
two-letter
color code.

7. Choose number of USB
modules. Input a number
followed by "U"

#U = Number of USB

Modules

LL

1U, 2U, etc.

Number of USB

Module #

followed

by "U"

8. Choose if
Deadfront GFCI
Protection is needed.
If not, leave blank.

G = Dead Front

GFCI Module

G

4