Page 1
T
he selection of lengths and fittings in a variety of
finishes provides a versatile solution for many
applications. Plugmold sections offer single or
alternating circuits, standard, or isolated ground receptacles,
Snapicoil® harnesses of prewired receptacles, and cord
ended units.
Steel Plugmold comes in black or ivory ScuffCoat™finish
and white or gray enamel finish. The ScuffCoat finish is
scratch resistant and protects against nicks and chips while
preventing color from fading. The enamel finishes are neutral
colors that work with many decors or can be painted to integrate
with most color schemes. Select Plugmold sections and
fittings are now available in a durable stainless steel.
Plugmold
®
Systems
Features & Benefits
■ Steel construction. Provides superior strength and
durability for any dry location installation.
■ Many finishes. Black or ivory ScuffCoat finish, white or
gray enamel and select sections and fittings in stainless
steel.
■ Compact, low profile appearance. Requires minimal
space.
■ Full range of fittings. Provides a complete wiring solution.
■ Single, alternating circuit, and isolated ground
receptacles available. Meets virtually any job requirement.
■ Variety of lengths. Ideal for different spaces.
■ Choose receptacle spacing. Suits many applications.
■ Snapicoil harnesses with different lengths and
receptacle spacing. Offers a solution for many electrical
requirements.
■ Duplex receptacle. Aesthetically pleasing, functional 20A
duplex for the 24S (2400) Series.
■ Single- and dual-gang boxes available. Wire devices into
the raceway system.
■ Customization available. All products can be modified to
accommodate virtually any application.
■ cULus Listed. Safety and reliability in the applications.
Steel Plugmold Raceway & Multioutlet Assemblies
Plugmold Systems come in a variety of finishes and configurations.
Plugmold Systems shown in typical applications.
ED1412 – May 2006 – For latest specs visit www.wiremold.com
Page 2
2
Catalog No./Item Description/Specifications
G2400 Base and Cover –
V2400 Base – G2400B or V2400B
.040" [1.0mm] steel.
Cover – G2400C or V2400C
.040" [1.0mm] steel.
Also available in custom colors.
Catalog No./Item Description/Specifications
2000* Base and Cover –
Base – 2000B .040" [1.0mm] steel.
Cover – 2000C .025" [.6mm] steel.
Cross Section
Plugmold 2000 System Layout
1 9/32"
[33mm]
1 29/32"
[48mm]
7/8"
[22.2mm]
3/4"
[19.1mm]
Cross-Sectional Area:
0.80in2[516mm2]
Cross-Sectional Area:
1.39in
2
[897mm2]
A — 2010B Blank End Fitting
B — 2051H Flush Plate Adapter
C — 2006 Cover Clip
D — 2017TC Internal Corner Coupling
E — 2015 Tee Fitting
F — 2048-2 Two-Gang Device Box
G — 2018C External Elbow Cover
H — 2048 Single-Gang Device Box
I — 2011 90° Flat Elbow
J — 20GB506 Plugmold Strip
K — 2089A Side-Reducing Fitting
L — 5748 Single-Gang Device Box
M — 500 Raceway
N — 2010A2 Entrance End Fitting
O — 2010A3 Entrance End Fitting
P — 518 External Elbow
Q — 2089E End-Reducing Connector
A
F
E
G
H
I
J
O
L
Q
P
M
M
N
K
B
C
D
NOTE: Illustration is for showing product applications only.
* Use “V” prefix for Ivory ScuffCoat
™
finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat™finish, “WH” for white enamel finish,
and “S” for stainless steel.
Page 3
Catalog No./Item Description/Specifications
Base and Cover Covers seam
between sections of 5400C.
V2003 Supporting Clip – For temporary
2003 support, while positioning lengths
of raceway base. Use with V/G
2000 Series. V2003 has ivory
finish, 2003 has plated finish.
W30 Pressure-Type Wire Connector –
For common connection of two,
three, or four No. 12 or No.14 solid
copper conductors. Not for
connection of equipment grounding
conductor. 300V maximum; 20A
60° C maximum. Not for use with
aluminum conductors.
2000WC Wire Clip – Holds conductors
2400WC in place in raceway.
AL2000WC
2001 Coupling – For joining lengths
of 2000 Series Raceway Base. at
any point
desired. Base come together.
BK2006* Cover Clip – For covering
G2006* joint where lengths of cover
V2006* or base adjoin. Use with
WH2006* V/G 2000 Series.
S2006*
BK2010A3* Entrance End – Offers larger
G2010A3* capacity than V2010A2. 1/2"
V2010A3* trade size KOs on end, each
WH2010A3* side and bottom. 3/4" trade
size KOs on bottom and rear.
Includes ground screw. Use
with V/G 2000 Series.
BK2010A2* Entrance End – For connecting
G2010A2* V2000 with 1/2" conduit and
V2010A2* armored cable connectors.
WH2010A2* 1/2" trade size KOs on end,
S2010A2* each side and bottom.
Includes ground screw. Use
with V/G 2000 Series.
3
Catalog No./Item Description/Specifications
2009 Ground Clamp – For connection
of equipment grounding conductor
to provide additional ground
to raceway. Use with
V/G2000 Series.
BK2010B* Blank End Fitting – For closing
G2010B* the open end of raceway.
V2010B* Use with V/G 2000 Series.
WH2010B*
S2010B*
BK2051* Flush Plate Adapter – For
G2051* feeding 2000 from an existing
V2051* wall outlet. Equipped with 1/2"
WH2051* [12.7mm] threaded stud, toothed
S2051* lockwasher for grounding, and
conduit bushing.
BK2011* 90º Flat Elbow – For right
G2011* angle turns on same surface.
V2011* Cover stop permits neat
WH2011* butting of 2000C Cover.
S2011* Two couplings furnished.
2017TC Internal Corner Coupling –
Furnished with one fiber bushing.
BK2018C* External Elbow – To continue
G2018C* raceway runs around outside
V2018C* corner. Fills the gap when
WH2018C* external corner is made by
S2018C* notching and bending the
2000 Base.
BK2015* Tee – For branches at right
G2015* angles. Couplings furnished.
V2015C*
WH2015C*
* Use “V” prefix for Ivory ScuffCoat™finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat™finish, “WH” for white enamel finish,
and “S” for stainless steel.
2"
[51mm]
V/G 2000 Series
2"
[51mm]
1 5/16"
[33mm]
3/4"
[19.1mm]
2 7/64"
[53mm]
1 29/32"
[47mm]
2 11/16"
[67mm]
3 22/64"
[94mm]
3"
[76mm]
1 9/32"
[58mm]
1 1/2"
[38mm]
2 1/8"
[54mm]
1 7/32"
[31mm]
How 2009 is used.
3/4"
[19.1mm]
Plugmold 2000
extended from wall
outlet using 2051H.
2051H fastened to
horizontally mounted
wall box.
4 1/2"
[114mm]
2051H fastened to
vertically mounted
wall box.
2 1/2"
[64mm]
Ea. Leg
1 1/2"
[38mm]
1 1/2"
[38mm]
2017TC
2017TC
2000B
2000B
2017TC used as
a corner coupling.
2017TC used as a
corner coupling and a
straight-through fitting.
Cover gap filler snapped
into place in 2018C.
1 7/8"
[48mm]
1 1/2"
[38mm]
4"
[102mm]
6"
[152mm]
ITEM CAT NO. LENGTH MATERIAL
Base V/G 2000B-5* 5' [1.5m] .040 Steel
Cover V/G 2000C* 5' [1.5m] .025 Steel
Base & Cover V/G 2000BC* 5' [1.5m] .025 Steel
Page 4
4
trade size
Catalog No./Item Description/Specifications
2409 Ground Clamp – No. 10
ground screw provided.
Use with V2400 Series.
V2410A Entrance End – For connecting
V2400 with 1/2" trade size conduit
and armored cable. Use with
V2400 Series.
V2410B Blank End – For closing open
end of V2400 Series.
V2410C Entrance End Fitting – Has 1/2"
and 3/4" trade size KOs on end
and bottom. Additional 1/2" trade
size KO on sides.
Catalog No./Item Description/Specifications
Base and Cover Covers seam
between sections of 5400C.
2401 Coupling – For joining
lengths of raceway. Use
with V2400 Series.
2400WC Wire Clip – Holds conductors
2400WC in place in raceway.
AL2000WC
AL2400WC
NM2000WC
V2406 Cover Clip – For covering
joint where lengths of cover
or base adjoin. Use with
V2400 Series (nonmetallic).
2"
[51mm]
1 1/2"
[38mm]
1"
[25mm]
Catalog No./Item Description/Specifications
V2089E End Reducing Connector
–
For connecting V2000 with
V500 Raceway through end
of V2000.
rectangular KO for extension to
wall box. Base has #10 threaded
620 2000 Raceway Base and
Cover Cutter – Portable
cutter for 2000 Cover and
Base. Tool steel construction
for clean and easy square
cuts every time. Total
manual operation.
620BCK Replacement Blade Kit –
Replacement blades and
die set for 620 Cutter.
Catalog No./Item Description/Specifications
BK2048* Single Gang Device Box –
G2048* Cover has twistouts for 2000,
V2048* V500, and V700 Raceway.
WH2048* Base has 1/2" trade KO and
S2048* rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2048-2 Two-Gang Device Box – Cover
has G2048-2 Twistouts for 2000,
V500, and V700 Raceway.
Base has 1/2" trade KO and
rectangular KO for extension to
wall box. Base has #10 threaded
hole for ground connection.
V2089 Side Reducing Connector –
For connecting V2000 with V500
Raceway through side of V2000.
orange receptacles.
Couplings furnished.
V/G 2000 Series
(continued)
1/2"
[12.7mm]
2"
[51mm]
1 5/8"
[41mm]
1 3/16"
[46mm]
1 3/16"
[30mm]
2 7/8"
[73mm]
1 3/4"
[44mm]
1 3/4"
[44mm]
4 5/8"
[117mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
6"
[152mm]
3 1/4"
[83mm]
3/4"
[19.1mm]
V2400 Series
ITEM CAT NO. LENGTH MATERIAL
Base V2400B 5' [1.5m] .040 Steel
Cover V2400C 5' [1.5m] .040 Steel
Base & Cover V2400BC 5' [1.5m] .040 Steel
2 11/16"
[68mm]
1 7/8"
[48mm]
2 1/8"
[54mm]
* Use “V” prefix for Ivory ScuffCoat™finish, “G” prefix for Gray enamel finish, “BK” for Black ScuffCoat™finish, “WH” for white enamel finish,
and “S” for stainless steel.
Page 5
5
Catalog No./Item Description/Specifications
V2489 Side Reducing Connector –
For connecting V2400 with
V500 Raceway.
V2444 Extra Deep Device Box –
V2444-2 Base has rectangular knockout
to enable extension from existing
single-gang flush wall box and
1/2" and 1" concentric KOs.
V2444 Cover has two twistouts
for 500 and 700, and two
twistouts for 2400. V2444-2
Cover has four 2400
Series twistouts.
624 2400 and 2400BD Raceway
& Cover Cutter – Portable
cutter for 2400B and 2400BD
Raceway and Cover. Tool
steel construction for clean
and easy square cuts.
Total manual operation.
624BCK Replacement Blade Kit –
Replacement blades and
die set for 624 Cutter.
Catalog No./Item Description/Specifications
V2411 90º Flat Elbow – For right angle
turns on the same surface
(nonmetallic cover).
V2417 Internal Elbow – For
making internal corners
(nonmetallic cover).
V2417M Internal Elbow – For
making internal 90° corners.
All steel construction.
V2418 External Elbow – For
covering outside corners
(nonmetallic cover).
V2451H Back Feed Fitting – For feeding
V2400 Raceway from an existing
outlet box. Equipped with 1/2"
trade size male bushing and
locknut washer for grounding.
V2448 Device Box – Cover
V2448-2 has one twistout for 2400 on
each side and ends. Base has
1/2" trade KO and rectangular
KO for extension to wall box.
Base has #10 threaded hole
for ground connection.
V2400 Series
(continued)
1 5/8"
[41mm]
1 5/8"
[41mm]
CAT NO. L W D GANG #
V2448 4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] 1
V2448-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] 2
2 3/4"
[70mm]
4 3/4"
[121mm]
4 3/4"
[121mm]
W
L
D
15/16"
[23.8mm]
2 1/16"
[52mm]
3 7/8"
[98mm]
CAT NO. L W D GANG #
V2444
4 5/8" [117mm] 2 7/8" [73mm] 1 3/4" [44mm] 1
V2444-2 4 3/4" [121mm] 4 3/4" [121mm] 1 3/4" [44mm] 2
1 3/4"
[45mm]
1 29/32"
[49mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
Page 6
6
GB Series:
3-wire, #12 THHN (1 hot,
1 neutral and 1 ground),
1 circuit; has insulated
grounding conductor.
GBA Series:
4-wire, #12 THHN (2 hot, 1
neutral and 1 ground), 2 circuit;
outlets wired alternately; has
insulated grounding conductor.
IG Series:
3-wire, #12 THHN (1 hot, 1
neutral and 1 ground), 1 circuit;
has insulated-isolated grounding
conductor. Orange receptacles.
Wiring Configuration
GB Series:
3-wire, #12 THHN (1 hot, 1 neutral
and 1 ground), 1 circuit; has
insulated grounding conductor.
GBA Series:
4-wire, #12 THHN (2 hot, 1
neutral and 1 ground), 2 circuit;
outlets wired alternately; has
insulated grounding conductor.
NOTE: SNAPICOIL REELS on custom order. Snapicoil is available on reels if lengths greater than 50’ are needed, or if multiple lengths are
required for production-type jobs. The maximum length per reel is 240’ for Snapicoil with outlets 12” and 18” on centers; 500’
with outlets 30” on center. Packaging includes the necessary number of lengths of base, holecut cover, wire clips, and couplings for
complete installation. Price and delivery information should be obtained prior to specifying or ordering. To specify or order, add R to the
Snapicoil number. Ex: V20GB12R. Other outlet spacings available on custom order.
Receptacles are made from high impact thermoplastic. V2000 Plugmold is supplied with two (2) V2010B Blank End Fittings and (1) 2001
Base Coupling. NM2000 Plugmold strips are supplied with two (2) NM2010B Blank End Fittings.
With Snapicoil
CATALOG WIRING OUTLETS (15A 120V NEMA 5-15SR) HOLE CUT COVER
NO. LENGTH CONFIG CENTER DISTANCE QUANTITY QUANTITY LENGTH HOUSING
Feet [meters] Inches [mm] Inches [mm]
20GB12 48' [14.63] GB 12" [305mm] 48 Single 8 6' [1.8m] Steel – Ivory, Gray
20GB18 48' [14.63] GB 18" [457mm] 32 Single 8 6' [1.8m] Steel – Ivory, Gray
V20GB30 50' [15.25] GB 30" [760mm] 20 Single 10 5' [1.5m] Steel – Ivory
20GBA12 48' [15.24] GBA 12" [305mm] 48 Single 8 6' [1.8m] Steel – Ivory, Gray
Plugmold with Snapicoil Harness
UNIT OUTLETS CIRCUIT
CAT NO. LENGTH QUANTITY CORD SET LENGTH TYPE SWITCH BREAKER FINISH
20-C2 3' 4" [1m] 6 Single 6' [1.8m] 12/3 SJT No Yes Steel – Gray, Ivory
Cord-Ended Plugmold Series
NO. OF CONDUCTORS
CABLE WIRE SIZE O.D. (40% FILL)
TYPE THHN/THWN Inches [mm] V2000 V2400
POWER WIRING 8 AWG 0.216 [5.5] – –
WITHOUT DEVICES 10 AWG 0.166 [4.2] – 26
12 AWG 0.130 [3.3] 7* 41
14 AWG 0.111 [2.8] 7* 57
POWER WIRING 8 AWG 0.218 [5.5] – 2
WITH DEVICES 10 AWG 0.153 [3.9] – 6
(PLUGMOLD) 12 AWG 0.122 [3.1] 5* 10
14 AWG 0.105 [2.7] 5* –
Plugmold Wire Fill Capacities for Power
*Wire capacity limited to maximum of seven conductors due to .025" [.6mm] material thickness of cover.
**Including one hot, neutral, and ground wire from the receptacle.
Page 7
7
WIRING OUTLETS
CATALOG NO. LENGTH CONFIG CENTER DISTANCE QUANTITY FINISH
Feet [mm] Inches [mm]
20GB206 2' [610mm] GB 6" [152mm] 4 Single 15A Steel – S
20GB306 3' [915mm] GB 6" [152mm] 6 Single 15A Steel – WH, BK, V, G, S
V24GB306 3' [915mm] GB 6" [152mm] 6 Single 20A Steel – V
24S3612GBX99IV 3' [915mm] GB 12" [305mm] 3 Duplex 20A Steel – V, G
24S3612GBA99IV 3' [915mm] GBA 12" [305mm] 3 Duplex 20A Steel – V, G
20GB506 5' [1.5m] GB 6" [152mm] 10 Single 15A Steel – WH, BK, V, G, S
V24GB506 5' [1.5m] GB 6" [152mm] 10 Single 20A Steel – WH, BK, V, G, S
20GB512 5' [1.5m] GB 12" [305mm] 5 Single 15A Steel – WH, BK, V, G, S
V24GB512 5' [1.5m] GB 12" [305mm] 5 Single 20A Steel – V
20IG512 5' [1.5m] IG 12" [305mm] 5 Single 15A Steel – V, G
20GBA512 5' [1.5m] GBA 12" [305mm] 5 Single 15A Steel – V, G
V24GBA512 5' [1.5m] GBA 12" [305mm] 5 Single 20A Steel – V
24S6012GBX99IV 5' [1.5m] GB 12" [305mm] 5 Duplex 20A Steel – V, G
24S6012GBA99IV 5' [1.5m] GBA 12" [305mm] 5 Duplex 20A Steel – V, G
24S6012IGX99IV 5' [1.5m] IG 12" [305mm] 5 Duplex 20A Steel – V, G
20GB606 6 [1.8m] GB 6" [152mm] 12 Single 15A Steel – WH, BK, V, G, S
V24GB606 6 [1.8m] GB 6" [152mm] 12 Single 20A Steel – V
20IG606 6 [1.8m] IG 6" [152mm] 12 Single 15A Steel – V, G
20GB609 6 [1.8m] GB 9" [229mm] 8 Single 15A Steel – V, G
20GBA609 6 [1.8m] GBA 9" [229mm] 8 Single 15A Steel – V, G
20GB612 6' [1.8m] GB 12" [305mm] 6 Single 15A Steel – WH, BK, V, G, S
20GBA612 6 [1.8m] GBA 12" [305mm] 6 Single 15A Steel – V, G
V24GB612 6' [1.8m] GB 12" [305mm] 6 Single 20A Steel – V
V24GBA612 6' [1.8m] GBA 12" [305mm] 6 Single 20A Steel – V
V24GB618 6' [1.8m] GB 12" [305mm] 6 Single 20A Steel – V
20GB618 6 [1.8m] GB 18" [457mm] 4 Single 15A Steel – V, G
20GBA618 6 [1.8m] GBA 18" [457mm] 4 Single 15A Steel – V, G
V24GBA618 6' [1.8m] GBA 18" [457mm] 4 Single 20A Steel – V
24S7212GBX99IV 6 [1.8m] GB 12" [305mm] 6 Duplex 20A Steel – V, G
24S7224GBA99IV 6 [1.8m] GBA 24" [608mm] 3 Duplex 20A Steel – V, G
24S7218GBX99IV 6 [1.8m] GB 18" [457mm] 4 Duplex 20A Steel – V, G
24S7224GBX99IV 6 [1.8m] GB 24" [608mm] 5 Duplex 20A Steel – V, G
24S7218IGX99IV 6 [1.8m] IG 18" [457mm] 5 Duplex 20A Steel – V, G
24S7212IGX99IV 6 [1.8m] IG 12" [305mm] 6 Duplex 20A Steel – V, G
24S7224IGX99IV 6 [1.8m] IG 24" [608mm] 3 Duplex 20A Steel – V, G
24S7212GBA99IV 6 [1.8m] GBA 12" [305mm] 6 Duplex 20A Steel – V, G
24S7218GBA99IV 6' [1.8m] GBA 18" [457mm] 4 Duplex 20A Steel – V, G
Plugmold Multi Outlet Strip
NOTE: “V” indicates Ivory ScuffCoat™finish, “G” indicates Gray ScuffCoat™finish, “WH” indicates White enamel
finish, “BK” indicates Black enamel finish, and “S” indicates Stainless Steel finish.
Page 8
Now you have a wide range of options for providing datacom connectivity into Wiremold®Cable Management Systems. They are:
• Ortronics®TracJack®and Series II Modular Connectivity Solutions
• Pass & Seymour Activate™Modular Inserts
• Open System Communication Modules
Use these icons to determine connectivity options for each Wiremold System component:
Ortronics®Connectivity
TracJack®Individual Jack System
• Front-loading, snap-in design supports future moves adds and changes
• Inserts for voice, data, audio, and video
• Available Category 3, 5e, 6, USOC 6-position, and other media
• Flat or angled 45° exit configurations
• Choice of 13 colors and color matched to Wiremold Systems
• Universal T568A/B wiring format
Series II Front-Loading, Module System
• Module design features easy snap-in front-loading design
• Linear 110 punch down format for easy termination
• Inserts for voice, data, audio, and video
• Available Category 3, 5e, 6, USOC 6-position, and other media
• Available in flat or angled 45° exit configurations
• Color matched to Wiremold Systems
For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com.
Pass & Seymour Legrand Network Wiring
Activate™Series Front-Loading Inserts
• Modular inserts for voice, data, audio and video applications
• Front-load, snap-in design
• Color and texture matched to Wiremold Systems
• Available Category 3, 5e, 6, as well as 6-position USOC
• Universal T568A/B wiring format
For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com.
Open Connectivity Solutions
Wiremold Open System Communications Modules
• Accommodate a wide range of manufacturers’ communications outlets including
keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX
• Modules insert into a wide range of Wiremold Systems
• Pre-punched faceplates accept common communication devices
ORT
Datacom Connectivity Options
NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems
contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative.
Wiremold / Legrand
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
ED1412 – May 2006 – For latest specs visit www.wiremold.com
© Copyright 2006 Wiremold / Legrand All Rights Reserved
ORT
ORT
P&S
OPEN
ORT
P&S
OPEN
P&S
OPEN
P&S
OPEN
ORT
P&S
OPEN
ORT
P&S
OPEN
Loading...