Wiremold CM2-U1KEYA,CM2-U1KEYA-WH,CM2-U1KEYA-GY,CM2-U1KEYA-BK,CM2-U1KEYA-G,CM2-U2KEYA,CM2-U2KEYA-WH,CM2-U2KEYA-GY,CM2-U2KEYA-BK,CM2-U2KEYA-G,CM2-U1ATT,CM2-U1ATT-WH,CM2-U1ATT-GY,CM2-U1ATT-BK,CM2-U1ATT-G,CM2-U1ATT-FW,CM2-U2ATT,CM2-U2ATT-WH,CM2-U2ATT-GY,CM2-U2ATT-BK,CM2-U2ATT-G,CM2-U1NOR,CM2-U1NOR-WH,CM2-U1NOR-GY,CM2-U1NOR-BK,CM2-U1NOR-G,CM2-U2ST,CM2-U2ST-WH,CM2-U2ST-GY,CM2-U2ST-BK,CM2-U2ST-G,CM2-U2SC,CM2-U2SC-WH,CM2-U2SC-GY,CM2-U2SC-BK,CM2-U2SC-G,CM2-U2NOR,CM2-U2NOR-WH,CM2-U2NOR-GY,CM2-U2NOR-BK,CM2-U2NOR-G Installation Manual

WIREMOLD®

Communication Modules

Open System Communication Connectivity Solutions

CM Series Open System Communication Modules
support open system architecture by providing
a variety of unloaded modules to accept devices
from Ortronics® and other industry leading
manufacturers. Mounting industry standard
communication devices in Wiremold wire and
cable management systems has never been easier.
These open system modules provide a flexible
and aesthetically pleasing way to easily connect
communication cabling at the point-of-use.

Shown: Dual and Single Unloaded Keystone Jack Modules.

FEATURES & BENEFITS

n

Open system capabilities. Unloaded modules are available

to accept a wide range of industry standard keystone jacks,
SC & ST fiber optic adapters, as well as, select proprietary
solutions from AMP NET CONNECT, Avaya/Lucent
and NORDX.

n

Wire management compatible. Modules snap securely into

Wiremold communication ready device brackets featuring
2A & 6A openings for an aesthetically pleasing look.

Communication modules provide a seamless point-of-use interface in Wiremold wire and cable management systems.
Shown: Vista Architectural Column, OFR Series Overfloor Raceway and Prewired Aluminum Raceway.

n

Installation and configuration ease. Modules feature

a front load snap-in design for ease of installation and
allowing outlet configuration changes to be made quickly.

n

j

Listed.

ED1119R9 – Updated June 2016 – For latest specs visit www.legrand.us/wiremold

Catalog No./Item Description/Specifications

CM2-U1KEYA 2A Single Flushmount
CM2-U1KEYA-WH

CM2-U1KEYA-GY Accepts keystone jacks with a
CM2-U1KEYA-BK latching area of 0.58" x 0.76"
CM2-U1KEYA-G (14.7mm x 19.3 mm). Available
in ivory (CM2-U1KEYA), white
(CM2-U1KEYA-WH), light gray
(CM2-U1KEYA-GY), black
(CM2-U1KEYA-BK) and gray
(CM2-U1KEYA-G).

CM2-U2KEYA 2A Dual Flushmount

CM2-U2KEYA-WH

CM2-U2KEYA-GY Accepts keystone jacks with a
CM2-U2KEYA-BK latching area of 0.58" x 0.76"
CM2-U2KEYA-G (14.7mm x 19.3 mm). Available
in ivory (CM2-U2KEYA), white
(CM2-U2KEYA-WH), light gray
(CM2-U2KEYA-GY), black
(CM2-U2KEYA-BK) and gray
(CM2-U2KEYA-G).

CM2-U1ATT 2A Single Systemix (Avaya)
CM2-U1ATT-WH Unloaded Module –

CM2-U1ATT-GY Accepts both M-series jacks
CM2-U1ATT-BK and LC fiber adapters. Available
CM2-U1ATT-G in ivory (CM2-U1ATT), white
CM2-U1ATT-FW (CM2-U1ATT-WH), light gray
(CM2-U1ATT-GY), black
(CM2-U1ATT-BK), gray
(CM2-U1ATT-G) and fog white
(CM2-U1ATT-FW).

CM2-U2ATT 2A Dual Systemix Avaya
CM2-U2ATT-WH Unloaded Module –
CM2-U2ATT-GY Accepts both M-series Jacks
CM2-U2ATT-BK and LC adapters. Available
CM2-U2ATT-G in ivory (CM2-U2ATT), white
(CM2-U2ATT-WH), light gray
(CM2-U2ATT-GY), black
(CM2-U2ATT-BK) and gray
(CM2-U2ATT-G) .

CM Series Communication Modules Ordering Information

Unloaded Keystone Module

Unloaded Keystone Module

–

–

Catalog No./Item Description/Specifications

CM2-U1NOR 2A, Single Flushmount
CM2-U1NOR-WH NORDX/CDT Unloaded
CM2-U1NOR-GY Module – Accepts MDVOFlex

CM2-U1NOR-BK jacks and fiber modules.
CM2-U1NOR-G Available in ivory (CM2­ U1NOR), white (CM2-U1NOR­ WH), light gray (CM2-U1NOR­ GY), black (CM2-U1NOR-BK)
and gray (CM2-U1NOR-G).

CM2-U2ST 2A, Dual Unloaded ST
CM2-U2ST-WH Adapter Module Accepts two
CM2-U2ST-GY ST adapters. Available in ivory
CM2-U2ST-BK (CM2-U2ST), white (CM2­ CM2-U2ST-G U2ST-WH), light gray
(CM2-U2ST-GY), black
(CM2-U2ST-BK) and gray
(CM2-U2ST-G).

CM2-U2SC 2A, Dual Unloaded SC
CM2-U2SC-WH Adapter Module Accepts one

CM2-U2SC-GY SC adapter. Available in ivory
CM2-U2SC-BK (CM2-U2SC), white (CM2­ CM2-U2SC-G U2SC-WH), light gray
(CM2-U2SC-GY), black
(CM2-U2SC-BK) and gray
(CM2-U2SC-G).

CM2-U2NOR 2A, Single Flushmount
CM2-U2NOR-WH NORDX/CDT Unloaded
CM2-U2NOR-GY Module – Accepts MDVOFlex

CM2-U2NOR-BK jacks and fiber modules.
CM2-U2NOR-G Available in ivory (CM2­ U2NOR), white (CM2-U2NOR­ WH), light gray (CM2-U2NOR­ GY), black (CM2-U2NOR-BK)
and gray (CM2-U2NOR-G).

Shown: Dual and Single Unloaded Keystone Jack Modules.

CM Series Communication Modules Ordering Information

Catalog No./Item Description/Specifications

CM2-U2AMP 2A Unloaded Single AMP
CM2-U2AMP-WH Netconnect Module –
CM2-U2AMP-GY For mounting two AMP

CM2-U2AMP-BK Netconnect SL Series
CM2-U2AMP-G devices. Available in ivory
(CM2-U2AMP), white
(CM2-U2AMP-WH), light gray
(CM2-U2AMP-GY), black
(CM2-U2AMP-BK) and gray
(CM2-U2AMP-G).

CM2-BL 2A, Blank Module –
CM2-BL-WH Required to fill unused
CM2-BL-GY openings. Available in ivory
CM2-BL-BK (CM2-BL), white (CM2-BL-WH),
CM2-BL-G light gray (CM2-BL-GY), black
(CM2-BL-BK) and gray
(CM2-BL-G).

Catalog No./Item Description/Specifications

CM2-U2SVGA 2A SVGA Module –
CM2-U2SVGA-WH Accepts one SVGA
CM2-U2SVGA-GY connector. Available in ivory

CM2-U2SVGA-BK (CM2-U2SVGA), white
CM2-U2SVGA-G (CM2-U2SVGA-WH), light gray
(CM2-U2SVGA-GY), black
(CM2-U2SVGA-BK) and gray
(CM2-U2SVGA-G).

Shown: Dual and Single

Unloaded Keystone

Jack Modules.

CM Series Communication Modules Specialty Mounting Adapters Ordering Information

Catalog No./Item Description/Specifications

CM-EPLA End Plate – End plates with

CM-EPLA-WH two outlet ID labels with clear
CM-EPLA-FW covers and two matching
CM-EPLA-G screw covers. Required when
mounting modules into 4050,
5450, 5550, and WSA07-4A
device mounting brackets, and
the V2444D-2A and 2344SD-2A
2-gang divided raceway box.
Available in ivory (CM-EPLA),
white (CM-EPLA-WH), fog
white (CM-EPLA-FW) and gray
(CM-EPLA-G).

Catalog No./Item Description/Specification

CM-MAB 6A Mini Mounting Adapter –

CM-MAB-GY 6A opening. Must be purchased
CM-MAB-BK separately for mounting
CM-MAB-FW communication modules in
service fittings where it is
indicated they are not included.
Available in ivory (CM-MAB),
light gray (CM-MAB-GY), black
(CM-MAB-BK) and fog white
(CM-MAB-FW).

CM-2AB Activate 2A Mini Mounting
CM-2AB-WH Adapter – Accepts one CM2

CM-2AB-GY Series communication module
CM-2AB-BK or one Pass & Seymour 2A
CM-2AB-G Activate Series insert. Available
in ivory (CM-2AB), white
(CM-2AB-WH), light gray
(CM-2AB-GY), black (CM-2AB­ BK) and gray (CM-2AB-G).

MAB6TJ Ortronics
MAB6TJ-GY Mounting Adapter – Accepts
MAB6TJ-BK six Ortronics
MAB6TJ-G Available in ivory (MAB6TJ),

light gray (MAB6TJ-GY), black
(MAB6TJ-BK) and fog white
(MAB6TJ-FW).

®

TracJack 6A

®

TracJack inserts.

CM Series Communication Modules Specialty Mounting Adapters Ordering Information

Catalog No./Item Description/Specifications

AB2TJ Ortronics® TracJack 2A
AB2TJ-WH Mini Mounting Adapter –
AB2TJ-GY Accepts two Ortronics

AB2TJ-BK

TracJack Inserts. Available in

®

AB2TJ-G ivory (AB2TJ), white (AB2TJ­ WH), light gray (AB2TJ-GY),
black (AB2TJ-BK) and gray
(AB2TJ-G).

Catalog No./Item Description/Specification

CM-SAP Single-Gang Angled
CM-SAP-WH Faceplate – For mounting

CM-SAP-GY two CM2 Series modules or
CM-SAP-G Pass & Seymour
Series device modules.
Available in ivory (CM-SAP),
white (CM-SAP-WH), light
gray (CM-SAP-GY) and gray
(CM-SAP-GY).

ABS2 Ortronics
ABS2-WH Mounting Adapter – Accepts
ABS2-GY one Ortronics

®

Series II 2A Mini

®

Series II 1-unit
ABS2-BK insert. Available in ivory (ABS2),
ABS2-G white (ABS2-WH), light gray
ABS2-FW (ABS2-GY), black (ABS2-BK),
gray (ABS2-G) BK fog white
(ABS2-FW).

ARA-S2-IV Angled Raceway Adapter –
ARA-S2-WH Mounting Adapter – For use

ARA-S2-FW with multi-channel raceway
ARA-S2-GY device brackets and
ARA-S2-BK WallSource device mounting
ARA-S2-G brackets. Angled exit provides
additional mounting depth
required for A/V connections
as well as ensuring the
required bend radius for
UTP and fiber optic cabling.
Holds two Ortronics
II modules. Fits 5507 Series
Faceplate opening.
Available in ivory (ARA-S2-IV),
white (ARA-S2-WH), fog white
(ARA-S2-FW), light gray (ARA­ S2-GY), black (ARA-S2-BK) and

MAB3S2 Ortronics® Series II 6A
MAB3S2-GY Mounting Adapter – Accepts

MAB3S2-G three Ortronics

®

Series II 1-unit
inserts. Available in ivory
(MAB3S2), light gray
(MAB3S2-GY) and gray
(MAB3S2-G).

gray (ARA-S2-G).

CM-DAP Double-Gang Angled
CM-DAP-WH Faceplate – For mounting four

CM2 Series modules or Pass &
Seymour

®

device modules. Available in
ivory (CM-DAP) and white
(CM-DAP-WH).

CM-DFP Double-Gang Faceplate –

CM-ARA Angled Raceway Adapter –
CM-ARA-WH For use with multi-channel

CM-ARA-GY raceway device brackets
CM-ARA-G and WallSource device
mounting brackets. Angled exit
provides additional mounting
depth required for audio/visual
connections as well as ensuring

CM-DFP-WH For mounting six CM2 Series
modules or Pass & Seymour
Activate Series device
modules. Available in
ivory (CM-DFP) and white
(CM-DFP-WH).

the required bend radius for
UTP and fiber optic cabling.
Holds two CM2 Series modules
or two 2A inserts. Fits 5507
Series Faceplate opening.
Available in ivory (CM-ARA),
white (CM-ARA-WH), light gray
(CM-ARA-GY) and gray
(CM-ARA-G).

CM-SFP Double-Gang Faceplate –
CM-SFP-WH For mounting thre CM2 Series

CM-SFP-G modules or Pass & Seymour
Activate Series device
modules. Available in
ivory (CM-SFP), white
(CM-SFP-WH) and gray
(CM-SFP-G).

®

Activate

®

Series

Activate Series

®

®

4

NOTES

5

NOTES

6

NOTES

7

NOTES

ED1119R9 – Updated June 2016 – For latest specs visit www.legrand.us/wiremold

© Copyright 2016 Legrand All Rights Reserved

Electrical Wiring Systems

60 Woodlawn Street
West Hartford, CT 06110
Phone: 1.877.BY.LEGRAND (295-3472)
www.legrand.us

570 Applewood Crescent
Vaughan, Ontario L4K 4B4
Phone:[phone]
www.legrand.ca