Page 1
®
WIREMOLD
Communication Modules
Open System Communication Connectivity Solutions
CM Series Open System Communication Modules
support open system architecture by providing a
variety of unloaded modules to accept devices
from Ortr o nics®and other indu s try leadin g
manu factur e rs. M o untin g industr y standa r d
communication devices in Wiremold wire and cable
ma nagem ent systems has never been easier .
These open system modules provide a flexible and
aes thet ically ple asin g way to ea sily conne ct
communication cabling at the point-of-use.
Shown: Dual and Single Unloaded Keystone Jack Modules.
F E A T U R E S & B E N E F I T S
n
Open system capabilities. Unloaded modules are available
to accept a wide range of industry standard keystone jacks,
SC & ST fiber optic adapters, as well as, select proprietary
solutions from AMP NET CONNECT, Avaya/Lucent
and NORDX.
n
Wire management compatible. Modules snap securely into
Wiremold communication ready device brackets featuring
2A & 6A openings for an aesthetically pleasing look.
n
Installation and configuration ease. Modules feature
a front load snap-in design for ease of installation and
allowing outlet configuration changes to be made quickly.
n
j
Listed.
Communication modules provide a seamless point-of-use interface in Wiremold wire and cable management systems.
Shown: Vista Architectural Column, OFR Series Overfloor Raceway and Prewired Aluminum Raceway.
ED1119R8 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold
Page 2
CM Series Open System Modules Ordering Information
Catalog No./Item Description/Specifications
M2-U2TJ 2A, Dual Flushmount
C
Unloaded Ortronics
TracJack®Module –
For mounting two Ortronics
TracJack devices.
M2-U2AMP 2A, Single Unloaded
C
AMP NETCONNECT
Module – For mounting
two AMP NETCONNECT
SL Series devices.
®
Catalog No./Item Description/Specifications
CM2-U1NOR 2A, Single Flushmount
NORDX/ CDT Unloaded
®
Module – For use with
MDVOFlex Jacks and
Fiber Modules.
M2-U2NOR 2A, Dual Flushmount
C
NORDX/ CDT Unloaded
Module – For use with
MDVOFlex Jacks and
Fiber Modules.
CM2-U1ATT 2A, Single Unloaded
Avaya/Lucent Module –
For use with M-Series Jacks
and LC Adapters.
CM2-U2ATT 2A, Dual Unloaded
Avaya/Lucent Module –
For use with M-Series Jacks
and LC Adapters.
CM2-U1KEYA 2A, Single Flushmount
Unloaded Keystone Module –
For mounting jacks with a
latching area of 0.57" x 0.76"
[14.5mm x 19.3mm].
CM2-U2KEYA 2A, Dual Flushmount
Unloaded Keystone Module –
For mounting jacks with a
latching area of 0.57" x 0.76"
[14.5mm x 19.3mm].
CM2-U2ST 2A, Dual Unloaded ST
Adapter Module
CM2-U2SC 2A, Unloaded Duplex SC
Adapter Module
CM2-BL Blank Insert
6A Communication Opening
NOTE: Standard color is Ivory, for other colors add suffix: “-WH” for White,
“-GY” for Light Gray (matches aluminum and nonmetallic raceways),
“-BK” for Black, and “-G” for Gray (matches Gray steel raceways).
Shown: Dual and Single Unloaded Keystone Jack Modules.
2A
+
2A
+
2A
6A
1 3/4"
[44mm]
size opening
2 7/8"
[73mm]
Page 3
CM Series Communication Module Mounting Adapters Ordering Information
Catalog No./Item Description/Specifications
M-EPLA* End Plates – Includes two outlet identification labels with clear covers and two
C
matching screw covers. Required for mounting Pass & Seymour
Wiremold Open System communication modules into 4050, 5450, 5550,
2344SD-2A, 2344D-2A, WSX07-X, 40N2, 60N2, and CXN Series device brackets.
M-MAB 6A Mini Adapter 6A Opening – Must be purchased separately for
C
2 5/16"
[59mm]
mounting modules into Walker Systems where it is indicated they are not
included. Available in ivory.
3 1/16"
[78mm]
Flush
®
Activate™and
CM-ARA* Angled Raceway Adapter – With two outlet identification labels with clear
covers and two matching screw covers. Provides angled exit in multichannel
raceway systems and WallSource
™
Boxes. Accepts two 2A size modules.
Snaps into standard device mounting brackets.
* Standard color is Ivory, for other colors add suffix: “-WH” for White, or “-G” for Gray (matches Gray steel raceways).
CM Series Faceplates Ordering Information
Catalog No./Item Description/Specifications
CM-SFP Single Gang Faceplate –
For mounting three (3) CM2
Series modules or Pass &
Seymour
®
Activate™Series
device modules.
CM-DFP Double Gang Faceplate –
For mounting six (6) CM2
Series modules or Pass &
Seymour
®
Activate™Series
device modules.
Catalog No./Item Description/Specification
CM-SAP Single Gang Angled
Faceplate – For mounting
three (3) CM2 Series modules
or Pass & Seymour
Series device modules.
CM-DAP Double Gang Angled
Faceplate – For mounting
four (4) CM2 Series modules
or Pass & Seymour
Series device modules.
®
Activate
®
Activate
™
™
NOTE: Add suffix “-WH” to indicate White finish.
Shown: Dual and Single
Unloaded Keystone
Jack Modules.
Page 4
N O T E S
ED1119R8 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold
© Copyright 2013 Legrand All Rights Reserved
Electrical Wiring Systems
60 Woodlawn Street
West Hartford, CT 06110
Phone: 1.877.BY.LEGRAND (295-3472)
www.legrand.us
570 Applewood Crescent
Vaughan, Ontario L4K 4B4
Phone:905.738.9195
www.legrand.ca
Loading...