Page 1
WIREMOLD
Floor Boxes
Fully Adjustable, Multiple Service, Floor Boxes
OmniBox™Series Floor Boxes provides an
excellent activation solution when multiple
services are required in open space areas.
OmniBox™Series Floor Boxes offer one-,
two-, and three-gang multi-service boxes
that are fully adjustable before and after the
concrete pour.
Available in both stamped steel and cast
iron fabrications, they meet a wide range of
workstation requirements for today’s and
tomorrow’s service needs. These floor boxes
have many applications, some of which
include schools, financial institutions, and
commercial office buildings.
Two-gang OmniBox Series Floor Box Installation with
an aesthetically pleasing flush activation cover.
®
F E A T U R E S & B E N E F I T S
n Fully adjustable box. Fully adjustable both before and after
concrete pour. Reduces installation costs.
n Two Fabrications: Stamped Steel – Lower cost concrete-tight
construction option for above grade applications. Cast-Iron –
Watertight construction for on or below grade applications.
n Available in two depths. Economical alternatives when pour
depths are limited.
n Flush activation assemblies for carpet and tile. Aesthetically
pleasing assemblies are interchangeable in both cast-iron and
stamped steel box models.
n Available in one-, two-, and three-gang configurations.
Removable dividers increase capacity. More configurations to
support multi-service applications.
n Triple service boxes. Accommodates power, communication
and/or audio/video devices which reduces the need for
multiple boxes.
n Brushed aluminum covers for power applications. 830CK
Series Aluminum Covers redesigned to accept threaded
conduit when passing through power cables.
n Brass and brushed aluminum covers accept single locking
power receptacles. New 828DLR Series provides single flip
lid cover.
n BAA Aluminum Covers. Rectangular aluminum covers are
now available in a version that complies with the Buy America
Act and ARRA requirements. Covers are available in five
powder coat finishes (black, gray, bronze, brass and nickel.
n 828COMTC Series Cover Kit in brass and brushed
aluminum. Allows communication devices to be recessed
into 880S and 880CS Series Floor Boxes.
n Partition support kit for 3-gang tile flanges. The
838TAL-880 Series Flanges provide partition supports in
tile applications for added strength and durability.
n TopGuard protection. All cover assemblies for the OmniBox
Floor Box Series have TopGuard protection. An integral design
which keeps out water, dirt, and debris from the power and
communication compartments.
n Boxes and covers have been listed by Underwriters
Laboratories Inc. to their standard UL514A, 514C,
514D, and Canadian standard C22.2
n Datacom connectivity options. Accepts industry standard
and proprietary devices from a wide range of manufacturers
to provide a seamless and aesthetically pleasing interface for
voice, data, audio, and video applications at the point-of-use.
A wide selection of data and adapter options available for use
with Ortronics
®
TracJack®and Series II devices.
Protection from
water, dirt, and
debris.
Single-gang stamped steel and triple-gang cast iron models of OmniBox Series Floor Boxes.
ED772R13 – U p d a ted J u ly 2 0 1 3 – For latest specs v i s i t ww w.wire mo ld.co m
Page 2
OmniBox Series Stamped Steel Floor Boxes Ordering Information
Catalog No./Item Description/Specifications
880S1 One-Gang Stamped Steel Floor Box – Fully Adjustable.
23/32"
3
94mm]
[
13/16"
4
122mm]
[
15/32"
3
88mm]
[
ECHNICAL SPECIFICATIONS
T
Conduit Openings Capacity Before Pour After Pour
3) 1/2" [12.7mm], (5) 3/4" [19.1mm] 53 1 3/4" [44mm] 1/2" [12.7mm]
(
2) 1" [25mm]
(
Cubic Inch Adjustment Adjustment
Country of Origin: USA
880S2 Two-Gang Stamped Steel Floor Box – Fully Adjustable.
880S3 Three-Gang Stamped Steel Floor Box – Fully Adjustable.
880M1 One-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
880M2 Two-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
880M3 Three-Gang Shallow Stamped Steel Floor Box – Fully Adjustable.
4 13/16"
[122mm]
13/16"
4
122mm]
[
23/32"
3
94mm]
[
4 13/16"
[122mm]
4 13/16"
[122mm]
7 15/16"
[202mm]
12"
[305mm]
4 13/16"
[122mm]
7 15/16"
[202mm]
12"
[305mm]
3 15/32"
[88mm]
15/32"
3
88mm]
[
2 15/32"
[63mm]
2 15/32"
[63mm]
ECHNICAL SPECIFICATIONS
T
Conduit Openings Capacity Before Pour After Pour
4) 1/2" [12.7mm], (8) 3/4" [19.1mm] 117 1 3/4" [44mm] 1/2" [12.7mm]
(
4) 1" [25mm] (58/59)
(
Cubic Inch Adjustment Adjustment
Country of Origin: USA
ECHNICAL SPECIFICATIONS
T
onduit Openings Capacity Before Pour After Pour
C
(5) 1/2" [12.7mm], (11) 3/4" [19.1mm] 180 1 3/4" [44mm] 1/2" [12.7mm]
6) 1" [25mm] (56/68/56)
(
Cubic Inch Adjustment Adjustment
Country of Origin: USA
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
(5) 1/2" [12.7mm], 37 1 3/4" [44mm] 1/2" [12.7mm]
(5) 3/4" [19.1mm]
Cubic Inch Adjustment Adjustment
Country of Origin: USA
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
(8) 1/2" [12.7mm], 80 1 3/4" [44mm] 1/2" [12.7mm]
(8) 3/4" [19.1mm] 40/40
Cubic Inch Adjustment Adjustment
Country of Origin: USA
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
(11) 1/2" [12.7mm], 126 1 3/4" [44mm] 1/2" [12.7mm]
(11) 3/4" [19.1mm] 39/48/39
Cubic Inch Adjustment Adjustment
Country of Origin: USA
OmniBox Series Floor Boxes are
available in a full range of box
sizes, depths, and capacities with
activation covers that enhance any
decor and provide a full range of
connectivity options.
2
Page 3
OmniBox Series Cast Iron Floor Boxes Ordering Information
Catalog No./Item Description/Specifications
880CS1-1 One-Gang Cast Iron Floor Box – Fully Adjustable.
3/8"
4
111mm]
[
3/16"
5
132mm]
[
7/16"
3
87mm]
[
ECHNICAL SPECIFICATIONS
T
Conduit Openings Capacity Before Pour After Pour
4) 1" [25mm] 48 1 3/4" [44mm] 1/2" [12.7mm]
(
Cubic Inch Adjustment Adjustment
Country of Origin: China
880CS2-1 Two-Gang Cast Iron Floor Box – Fully Adjustable.
880CS3-1 Three-Gang Cast Iron Floor Box – Fully Adjustable.
880CS1-NA North America Made One-Gang Cast Iron Floor Box – Fully Adjustable.
880CS2-NA North America Made Two-Gang Cast Iron Floor Box – Fully Adjustable.
5 3/16"
[132mm]
5 3/16"
[132mm]
4 3/8"
[111mm]
5 3/16"
[132mm]
8 1/2"
[216mm]
2 1/2"
1
318mm]
[
5 3/16"
[132mm]
8 1/2"
[216mm]
3 7/16"
[87mm]
3 7/16"
[87mm]
3 7/16"
[87mm]
3 7/16"
[87mm]
ECHNICAL SPECIFICATIONS
T
Conduit Openings Capacity Before Pour After Pour
6) 1" [25mm] 94 1 3/4" [44mm] 1/2" [12.7mm]
(
Cubic Inch Adjustment Adjustment
45/49)
(
Country of Origin: China
ECHNICAL SPECIFICATIONS
T
onduit Openings Capacity Before Pour After Pour
C
(8) 1" [25mm] 160 1 3/4" [44mm] 1/2" [12.7mm]
Cubic Inch Adjustment Adjustment
53/54/53)
(
Country of Origin: China
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
(4) 1" [25mm] 48 1 3/4" [44mm] 1/2" [12.7mm]
Cubic Inch Adjustment Adjustment
Country of Origin: USA
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
(6) 1" [25mm] 94 1 3/4" [44mm] 1/2" [12.7mm]
Cubic Inch Adjustment Adjustment
(45/49)
Country of Origin: USA
880CS3-NA North America Made Three-Gang Cast Iron Floor Box – Fully Adjustable.
5 3/16"
[132mm]
12 1/2"
[318mm]
3 7/16"
[87mm]
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
(8) 1" [25mm] 160 1 3/4" [44mm] 1/2" [12.7mm]
Cubic Inch Adjustment Adjustment
(53/54/53)
Country of Origin: USA
3
Page 4
OmniBox Series Cast Iron Floor Boxes Ordering Information (continued)
Catalog No./Item Description/Specifications
880CM1-1 One-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
3/8"
4
111mm]
[
3/16"
5
132mm]
[
7/16"
2
62mm]
[
TECHNICAL SPECIFICATIONS
onduit Openings Capacity Before Pour After Pour
C
(4) 1" [25mm], 34 1 3/4" [44mm] 1/2" [12.7mm]
ubic Inch Adjustment Adjustment
C
Country of Origin: USA
880CM2-1 Two-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
880CM3-1 Three-Gang Shallow Cast Iron Floor Box – Fully Adjustable.
5 3/16"
[132mm]
3/16"
5
132mm]
[
1/2"
8
216mm]
[
12 1/2"
[318mm]
7/16"
2
62mm]
[
TECHNICAL SPECIFICATIONS
onduit Openings Capacity Before Pour After Pour
C
(6) 1" [25mm], 76 1 3/4" [44mm] 1/2" [12.7mm]
Country of Origin: USA
TECHNICAL SPECIFICATIONS
Conduit Openings Capacity Before Pour After Pour
7/16"
2
62mm]
[
(8) 1" [25mm], 118 1 3/4" [44mm] 1/2" [12.7mm]
Country of Origin: USA
ubic Inch Adjustment Adjustment
C
6/40
3
Cubic Inch Adjustment Adjustment
9/40/39
3
Cover Plates for OmniBox Series Floor Boxes provide access to a wide range of connectivity
and are available in both metal and nonmetallic fabrications.
4
Page 5
OmniBox Series Floor Boxes Solid Brass Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications
817B One-Gang Brass Combination
1/16"
6
154mm]
[
827B Two-Gang Brass Combination
1/16"
6
154mm]
[
[
837B Three-Gang Brass Combination
3 5/16"
1
338mm]
6 1/16"
[154mm]
[
817C One-Gang Brass Carpet Flange –
5 3/4"
[146mm]
[121mm]
827C Two-Gang Brass Carpet Flange –
5 3/4"
[146mm]
8 7/8"
[225mm]
Carpet & Tile Flange – Accepts
Ortronics
®
MAB6TJ TracJack and
MAB3S2 Series II adapters and
Wiremold CM Series inserts,
5 1/16"
sold separately.
[129mm]
Country of Origin: China
arpet and Tile Flange – Accepts
C
Ortronics
®
MAB6TJ TracJack and
MAB3S2 Series II adapters and
Wiremold CM Series inserts,
1/16"
9
sold separately.
230mm]
Country of Origin: China
Carpet and Tile Flange – Accepts
Ortronics
®
MAB6TJ TracJack and
MAB3S2 Series II adapters and
Wiremold CM Series inserts,
sold separately.
Country of Origin: China
For use on 880S1, 880M1,
880CS1-1, and 880CM1-1
Floor Boxes.
Country of Origin: China
4 3/4"
For use on 880S2, 880M2,
880CS2-1, and 880CM2-1
Floor Boxes.
Country of Origin: China
Catalog No./Item Description/Specifications
837C Three-Gang Brass Carpet
Flange – For use on 880S3,
880M3, 880CS32-1, and
880CM3-1 Floor Boxes.
3"
1
330mm]
3/4"
5
146mm]
[
[
Country of Origin: China
817T One-Gang Brass Tile Flange –
For use on 880S1, 880M1,
880CS1-1, and 880M1-1
Floor Boxes.
1/2"
4
114mm]
[
Country of Origin: China
3 1/2"
[89mm]
827T Two-Gang Brass Tile Flange –
For use on 880S2, 880M2,
880CS2-1, and 880CM2-1
Floor Boxes.
4 1/2"
[114mm]
[194mm]
Country of Origin: China
7 5/8"
837T Three-Gang Brass or Brushed
Aluminum Tile Flange – For use
on 880S3, 880M3, 880CS3-1, and
880CM3-1 Floor Boxes.
Country of Origin: China
11 3/4"
4 1/2"
[114mm]
[298mm]
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
5
All cover assemblies
for the OmniB ox Floor
Box Series have
TopGuard protection.
Page 6
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
Catalog No./Item Description/Specifications
828R Brass Duplex Cover Plate – Flip
1/8"
3
79mm]
[
4
106mm]
[
lids. Can also be used with a 106
type communication adapter.
3/16"
Country of Origin: China
Catalog No./Item Description/Specifications
829STC Brass Communication Cover
Plate – Data slides. Feed through
only, not for use with a mounting
plate for communication jacks.
1/8"
3
79mm]
[
4 3/16"
[106mm]
Country of Origin: China
28GFITC Brass GFI Cover Plate –
8
used with Activate and Ortronics
M
ay be
®
Connectivity Systems in
conjunction with 817B, 827B,
and 837B Flanges.
3/16"
3 1/8"
[79mm]
4
106mm]
[
Country of Origin: China
828DPGFITC Brass Rectangular Cover Plate –
Allows for mounting of a duplex
style receptacle with a
rectangular style flip lid cover.
Country of Origin: China
3/16"
1/8"
3
79mm]
[
4
106mm]
[
828COMTC Brass Communication Cover
3 1/8"
[79mm]
4 3/16"
[106mm]
Plate – Allows for up to four
communication devices to be
mounted in a recessed position
within the 880 Floor Box. The
828COM Cover Plate has
removable slides for cable egress.
Country of Origin: China
NOTE: For use with 880S and 880CS Series Boxes only.
828DLR Brass Single Locking Receptacle
Cover Plate – Single flip lid cover
for 20A or 30A single locking
receptacles. Device opening is
2 5/8" [67mm]. For use with
maximum female locking device of
1.58" diameter, and maximum male
4 3/16"
[106mm]
[79mm]
plug face of 2.25" diameter
3 1/8"
Country of Origin: China
829CK Brass Communication Cover
Plate – 2 5/8" and 2 1/4" [67mm
and 57mm] plugs.
Country of Origin: China
1/8"
3
79mm]
[
4 3/16"
[106mm]
829CK-1 Brass Communication Cover
Plate – 2 5/8" and 1" [67mm and
25mm] plugs.
Country of Origin: China
3 1/8"
[79mm]
4 3/16"
106mm]
[
829CK-3/4 Brass Communication Cover
Plate – 2 5/8" and 3/4" [67mm
and 19.1mm] plugs.
Country of Origin: China
3 1/8"
[79mm]
4 3/16"
[106mm]
829CK-1/2 Brass Communication Cover
Plate – 2 5/8" and 1/2" [67mm
and 12.7mm] plugs.
Country of Origin: China
3 1/8"
[79mm]
4 3/16"
[106mm]
828MAAP A/V Adapter Plate – Sheet metal
adapter plate that accepts two (2)
®
Extron
Electronics MAAP style
device plates (sold separately). For
use with 828GFITC or 828GFITCAL
cover plates. (Sold separately)
Country of Origin: USA
828SPTC Brass Duplex Cover Plate –
Screw plugs. Screw plugs are
1 1/2" [38mm] in diameter.
Country of Origin: China
3 1/8"
[79mm]
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
4 3/16"
[106mm]
6
All cover assemblies
for the OmniBox Floor
Box Series have
TopGuard protection.
Page 7
OmniBox Series Floor Boxes Brushed Aluminum Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications
818TCAL One-Gang Brushed Aluminum
Combination Carpet and Tile
Flange – Accepts Ortronics
®
MAB6TJ TracJack and MAB3S2
Series II adapters and Wiremold
6"
[152mm]
[
NOTE: Brushed aluminum flanges come with beveled edges.
CM Series inserts, sold separately.
"
5
127mm]
Country of Origin: China
828TCAL Two-Gang Brushed Aluminum
Combination Carpet and Tile
Flange – Accepts Ortronics
®
MAB6TJ TracJack and MAB3S2
Series II adapters and Wiremold
6
152mm]
[
"
[
Country of Origin: China
CM Series inserts, sold separately.
1/16"
9
230mm]
NOTE: Brushed aluminum flanges come with beveled edges.
838TCAL Three-Gang Brushed Aluminum
Combination Carpet and Tile
Flange – Accepts Ortronics
®
MAB6TJ TracJack and MAB3S2
Series II adapters and Wiremold
CM Series inserts, sold separately.
Country of Origin: China
13 3/16"
6"
[152mm]
NOTE: Brushed aluminum flanges come with beveled edges.
[335mm]
Catalog No./Item Description/Specifications
818TAL One-Gang Brushed Aluminum
Tile Flange – For use on 880S1,
880M1, 880CS1-1, and 880M1-1
Floor Boxes.
1/2"
4
114mm]
[
Country of Origin: China
3 1/2"
[89mm]
828TAL Two-Gang Brushed Aluminum
Tile Flange – For use on 880S2,
880M2, 880CS2-1, and 880CM2-1
Floor Boxes.
Country of Origin: China
7 5/8"
"
2
/
1
4
m]
m
4
1
[1
[194mm]
838TAL-880S3 Kit – The 838TAL-880 Series
838TAL-880M3 flanges provide additional load
838TAL-880CS3 support for 3-gang tile flanges.
838TAL-880CM3 Kit includes 838TAL Flange and
two support dividers.
1 3/4"
1
298mm]
4 1/2"
[114mm]
[
NOTE: Order kit for specific
box type: 880S3, 880M3,
880CS3, or 880CM3.
Country of Origin: USA
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
7
All cover assemblies
for the OmniB ox Floor
Box Series have
TopGuard protection.
Page 8
OmniBox Series Floor Boxes Metal Cover Plates Ordering Information
Catalog No./Item Description/Specifications
828R-TCAL Brushed Aluminum Duplex
1/4"
3
83mm]
[
4
110mm]
[
Cover Plate – Flip lids.
Can also be used with a 106
type communication adapter.
Country of Origin: China
5/16"
Catalog No./Item Description/Specifications
830CKTCAL Brushed Aluminum Cover
Plate – Power or communication
plate with 2" [51mm] and 1 1/4"
[32mm] plugs.
Country of Origin: China
5/16"
4
110mm]
[
NOTE: Acceptable for use with
3 1/4"
[83mm]
threaded conduit when passing
through power cables.
828GFITCAL Brushed Aluminum GFI
Cover Plate – May be used
with Activate and Ortronics
®
Connectivity Systems in
conjunction with 817B, 827B,
and 837B Flanges.
1/4"
3
83mm]
[
4 5/16"
[110mm]
Country of Origin: China
828DPGFITCAL Brushed Aluminum Rectangular
Cover Plate – Allows for mounting
of a duplex style receptacle with a
rectangular style flip lid cover.
Country of Origin: China
3 1/4"
[83mm]
4 5/16"
[110mm]
828COMTCAL Brushed Aluminum
3 1/4"
[83mm]
4 5/16"
[110mm]
Communication Cover Plate –
Allows for up to four
communication devices to be
mounted in a recessed position
within the 880 Floor Box. The
828COMTCAL Cover Plate has
removable slides for cable egress.
Country of Origin: China
NOTE: For use with 880S and 880CS Series Boxes only.
828DLRAL Brushed Aluminum Single
Locking Receptacle Cover Plate –
Single flip lid cover for 20A or 30A
single locking receptacles. Device
opening is 2 5/8" [67mm]. For use
with maximum female locking
device of 1.58" diameter, and
maximum male plug face of
4 5/16"
[110mm]
3 1/4"
[83mm]
2.25" diameter
Country of Origin: China
830CKTCAL-1 Brushed Aluminum Cover
Plate – Power or communication
plate with 2" [51mm] and 1"
[25mm] plugs.
Country of Origin: China
5/16"
4
110mm]
[
NOTE: Acceptable for use with
1/4"
3
83mm]
[
threaded conduit when passing
through power cables.
830CKTCAL-3/4 Brushed Aluminum Cover
Plate – Power or communication
plate with 2" [51mm] and 3/4"
[19.1mm] plugs.
Country of Origin: China
5/16"
4
110mm]
[
[83mm]
NOTE: Acceptable for use with
3 1/4"
threaded conduit when passing
through power cables.
830CKTCAL-1/2 Brushed Aluminum Cover
Plate – Power or communication
plate with 2" [51mm] and 1/2"
[12.7mm] plugs.
Country of Origin: China
4 5/16"
[110mm]
NOTE: Acceptable for use with
3 1/4"
[83mm]
threaded conduit when passing
through power cables.
828MAAP A/V Adapter Plate – Sheet metal
adapter plate that accepts two (2)
®
Extron
Electronics MAAP style
device plates (sold separately). For
use with 828GFITC or 828GFITCAL
cover plates. (Sold separately)
Country of Origin: USA
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic
covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges.
8
All cover assemblies
for the OmniBox Floor
Box Series have
TopGuard protection.
Page 9
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications
817TCAL-BK One-Gang Powder-Coated
817TCAL-GY Aluminum Combination Carpet
817TCAL-BS and Tile Flange – Accepts
817TCAL-NK Ortronics
®
MAB6TJ TracJack and
817TCAL-BZ MAB3S2 Series II adapters and
Wiremold CM Series inserts,
old separately. Flanges are
s
available in five decorative colors:
black, gray brass,nickel and bronze.
1/16"
6
154mm]
[
Country of Origin: USA
5 1/16"
[129mm]
827TCAL-BK Two-Gang Powder-Coated
827TCAL-GY Aluminum Combination Carpet
827TCAL-BS and Tile Flange – Accepts
827TCAL-NK Ortronics
®
MAB6TJ TracJack and
827TCAL-BZ MAB3S2 Series II adapters and
Wiremold CM Series inserts, sold
separately. Flanges are available in
five decorative colors: black, gray
brass,nickel and bronze.
1/16"
9
230mm]
1/16"
6
154mm]
[
[
Country of Origin: USA
837TCAL-BK Three-Gang Powder-Coated
837TCAL-GY Aluminum Combination Carpet
837TCAL-BS and Tile Flange – Accepts
837TCAL-NK Ortronics
®
MAB6TJ TracJack and
837TCAL-BZ MAB3S2 Series II adapters and
Wiremold CM Series inserts, sold
separately. Flanges are available in
five decorative colors: black, gray
brass,nickel and bronze.
Catalog No./Item Description/Specifications
827TAL-BK Two-Gang Powder-Coated
827TAL-GY Aluminum Tile Flange – For use
827TAL-BS on 880S2, 880M2, 880CS2-1,
827TAL-NK and 880CM2-1 Floor Boxes.
827TAL-BZ Flanges are available in five
decorative colors: black, gray
rass,nickel and bronze.
b
Country of Origin: USA
5/8"
7
194mm]
4 1/2"
[114mm]
[
828R-TCALBK Powder-Coated Aluminum
828R-TCALGY Duplex Cover Plate – Flip lids.
828R-TCALBS Can also be used with a
828R-TCALNK 106 type communication adapter.
828R-TCALBZ
1/4"
3
83mm]
[
Country of Origin: USA
5/32"
4
110mm]
[
828GFITCAL-BK Powder-Coated Aluminum
828GFITCAL-GY Rectangular Cover Plate – Allows
828GFITCAL-BS for mounting a duplex receptacle
828GFITCAL-NK (Decorator or GFCI style) with a
828GFITCAL-BZ rectangular flip cover
Country of Origin: USA
Country of Origin: USA
13 3/16"
6 1/16"
[154mm]
[335mm]
817TAL-BK One-Gang Powder-Coated
817TAL-GY Aluminum Tile Flange – For use
817TAL-BS on 880S1, 880M1, 880CS1-1,
817TAL-NK and 880M1-1 Floor Boxes.
817TAL-BZ Flanges are available in
five decorative colors: black, gray
brass,nickel and bronze.
Country of Origin: USA
4 1/2"
[114mm]
3 1/2"
[89mm]
3 1/4"
[83mm]
4 5/32"
[110mm]
829CKAL-1BK Powder-Coated Aluminum
829CKAL-1GY Cover Plate – Power or
829CKAL-1BS communication plate with 2"
829CKAL-1NK [51mm] and 1" [25mm] plugs.
829CKAL-1BZ Covers are available in five
decorative colors: black, gray
brass,nickel and bronze.
Country of Origin: USA
4 5/32"
[110mm]
NOTE: Acceptable for use with
3 1/4"
[83mm]
threaded conduit when passing
through power cables.
NOTE: Pricing varies depending on country of origin. Consult your local sales representative for more information.
9
Page 10
OmniBox Series Floor Boxes Powder-Coated Aluminum Cover Plate Flanges Ordering Information (
Catalog No./Item Description/Specifications
829CKAL-3/4BK Powder-Coated Aluminum
829CKAL-3/4GY Cover Plate – Power or
829CKAL-3/4BS communication plate with 2"
829CKAL-3/4NK [51mm] and 3/4" [19.1mm] plugs.
829CKAL-3/4BZ Covers are available in five
decorative colors: black, gray
rass,nickel and bronze.
b
Country of Origin: USA
Catalog No./Item Description/Specifications
828MAAP A/V Adapter Plate – Sheet metal
adapter plate that accepts two (2)
®
Extron
Electronics MAAP style
device plates (sold separately). For
use with 828GFITC or 828GFITCAL
cover plates. (Sold separately)
Country of Origin: USA
Continued)
4 5/32"
[110mm]
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with
aluminum or nonmetallic covers and flanges. Nonmetallic
covers are interchangeable with aluminum flanges.
1/4"
3
83mm]
[
NOTE: Acceptable for use with
threaded conduit when passing
through power cables.
10
Page 11
OmniBox Series Floor Boxes Nonmetallic Cover Plate Flanges Ordering Information
Catalog No./Item Description/Specifications
817PCC-BLK One-Gang Nonmetallic
817PCC-BRN Carpet Flange – Available in black
or brown. For Ortronics
connectivity use with 829PFLRT
Cover. For Activate connectivity
5 3/4"
[146mm]
use with 829PFL Cover. Accepts
Ortronics
M
3/4"
4
Wiremold CM Series inserts,
121mm]
[
®
MAB6TJ TracJack and
AB3S2 Series II adapters and
sold separately.
Country of Origin: Mexico
®
Catalog No./Item Description/Specifications
837PCC-BLK Three-Gang Nonmetallic
837PCC-BRN Flange – Available in black or
brown. For Ortronics
®
connectivity
use with 829PFLRT Cover. For
ctivate connectivity use with
A
829PFL Cover. Accepts Ortronics
MAB6TJ TracJack and MAB3S2
Series II adapters and Wiremold
CM Series inserts, sold separately.
Country of Origin: Mexico
5 3/4"
[146mm]
13"
[330mm]
®
827PCC-BLK Two-Gang Nonmetallic
827PCC-BRN Carpet Flange – Available in black
or brown. For Ortronics
®
connectivity use with 829PFLRT
Cover. For Activate connectivity use
5 3/4"
[146mm]
7/8"
8
225mm]
[
with 829PFL Cover. Accepts
Ortronics
MAB3S2 Series II adapters and
Wiremold CM Series inserts, sold
®
MAB6TJ TracJack and
separately.
Country of Origin: Mexico
OmniBox Series Floor Boxes Nonmetallic Cover Plates Ordering Information
Catalog No./Item Description/Specifications
828PR-BLK Nonmetallic Duplex Cover
828PR-BRN Plate – Flip lids. Available in
3 3/16"
[81mm]
4 1/8"
[105mm]
828PRGFI-BLK Nonmetallic GFI Cover
828PRGFI-BRN Plate – Available in black or brown.
3 3/16"
[81mm]
4 1/8"
[105mm]
829PFL-BLK Nonmetallic Communication
829PFL-BRN Cover Plate – Individual flip
3 3/16"
[81mm]
[105mm]
black or brown. Can also be
used with a 106 type
communication adapter.
Country of Origin: USA
May be used with Ortronics
Connectivity systems in conjunction
with 817, 827 and 837PCC
Series flanges.
Country of Origin: USA
lids.* Available in black or brown.
Gasket included. Wiremold CM
Series inserts included.
Country of Origin: USA
4 1/8"
®
NOTE: UL Listed for tile, terrazzo, and carpet floors.
Brass covers and flanges are not interchangeable with
aluminum or nonmetallic covers and flanges. Nonmetallic
covers are interchangeable with aluminum flanges.
Catalog No./Item Description/Specifications
829PFLRT-BLK Nonmetallic Communication
829PFLRT-BRN Cover Plate – Individual flip
lids.* Available in black or brown.
Gasket included. Ortronics
MAB6TJ TracJack and MAB3S2
Series II adapters included.
Country of Origin: USA
3 3/16"
[81mm]
4 1/8"
[105mm]
829PCK-BLK Nonmetallic Communication
829PCK-BRN Cover Plate – Breakouts.
Available in black or brown.
Feed through only, not for
use with a mounting plate
for communication jacks.
Country of Origin: USA
3 3/16"
[81mm]
4 1/8"
[105mm]
829PSTC-BLK Nonmetallic Communication
829PSTC-BRN Cover Plate – Data slides.
Available in black or brown.
Feed through only, not for
use with a mounting plate
for communication jacks.
3 3/16"
[81mm]
4 1/8"
[105mm]
Country of Origin: USA
®
*Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids. The above cover
plates are listed for tile, terrazzo, and carpet floors.
NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges.
Nonmetallic covers are interchangeable with aluminum flanges.
11
Page 12
N O T E S
ED772R13 – Updated July 2013 – For latest specs visit www.legrand.us/wiremold
© Copyright 2013 Legrand All Rights Reserved
Electrical Wiring Systems
60 Woodlawn Street
West Hartford, CT 06110
Phone: 1.877.BY.LEGRAND (295-3472)
www.legrand.us
570 Applewood Crescent
Vaughan, Ontario L4K 4B4
Phone:905.738.9195
www.legrand.ca
Loading...