WIRELESS HEADPHONES USA SS RT User Manual

User Manual

Model: SS-RT

Brand: Silent Safaris

FCC ID: S7FSS-RT

Connect your media devices to the transmitter by using the cable with 3.5mm audio

plug. And sounds will send to the transmitter through the audio cable. Then press the
key of transmitter at a short time for switching channel, keep your wireless headset
and FM transmitter at the same frequency. The wireless headset will receive the music.
You can enjoy your digital music with all sound and convenience.

Specification:

Operation Voltage：3.7V
Operation Current：42mA
Transmitting Power：8dBm
Operation Frequency： 915, 917MHZ
Modulation：FM
Charge Voltage：5.0V
Charge Voltage：200mA
Charge Tim e：1-2 hours/(200mA)

I. Press Key：

①Power on by press the Power SW for a second, Power off by press key for a second
②After startup, press the key at a short time for switching channel , and the device acquiesce in 1

channel (915MHz) with green indicator.

③Press the key at a short time for changing to 2 channel（917MHz）with red indicator
④If there is no input signal，after 5 seconds the device will auto power off ，you should power on

the device own.
⑤Only the input signal larger than 60mVp-p, the transmitter can identify the signal. Otherwise the
recognition is no signal.

II. Charge

The USB plug is used for charging

①When no starting charging, red light flashing.
②After startup charging, the light is blinking; When the battery is full ,it will return to its original state

of work instructions

IMPORTANT REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference that is received, including any interference that may cause
undesired operation.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.