Wireless comfort WCT-32 User Manual

Wireless
TM
COMF RT
Made in the USA
Improved Comfort
Your wireless thermostat provides automatic control of the temperature. You can set separate temperatures for heating and cooling for four time periods per day (morning, daytime, evening and night). Or you can operate the thermostat without using the schedule feature (Permanent Hold mode).
Energy Savings
The schedule feature can save you energy by reducing the heating and cooling at night and during the daytime when you are away.
User Manual
Model WCT-32
SYSTEM
FAN
This wireless communicating thermostat has a response delay when any of the keys are
pressed. This allows changes and commands to be properly transmitted to the HVAC Control
Indicates Morn, Day, Eve or Night schedule
Space temperature
Indicates the Schedule, Hold or Permanent Hold mode
Menu key used to set time of day, daily schedule, calibrate temperature sensor and display schedule.
Module.
Temperature Setting
Inside
MENU HOLD
Day
Mo
NEXT
Up and Down keys used when adjusting temperature, time of day, day of the week, program start times and other options
Heat
Set To
AUTO
SYSTEM
SYSTEM key selects Heat, Cool,
AM
ENTER
FAN
Auto Heat/Cool, Off and Emergency Heating for a heat pump application
Fan key selects Auto or Cont fan operation
Hold key used to switch between Schedule and Permanent H operation
Next key used when setting time of day and schedules
Battery compartment, 2 AA batteries.
Enter key used when setting time of day and schedules
Factory Schedule
The thermostat is shipped with the following factory schedule.
Inside
Fan
Mode
Set To
HEAT
Program Start Time
Morning Day Evening Night
6:00AM 8:00AM 5:00PM
10:00PM
Setpoint
Heating
70F 62F 70F 62F
Cooling
78F 82F 78F 82F
Warning!
The thermostat is battery powered and the batteries should be changed every year or when the low battery warning is displayed.
Selecting System Heat or Cool
Press the key to select , (heating and cooling)
Heat Cool EM HT
heating) if your system is a heat pump).
In the thermostat will call for heating or cooling depending on the heating and cooling temperatures and the indoor temperature.
System Off Auto
(heating only), (cooling only) or (emergency
Auto
MENU
HOLD
Th
AM
NEXT
AUTO
ENTER
Selecting Schedule or Permanent Hold
Press the key to switch between , and . operation automatically changes the heating and cooling temperature settings at the four scheduled times– Morning, Day, Evening and Night.
When in operation, adjusting the heating or cooling temperature using the and keys switches to the mode. After 3 hours the thermostat returns to the mode. Press the key at any time to return to mode.
The mode maintains the heating and cooling temperatures indefinitely until the key is pressed which will return the thermostat to the operation.
Hold Hold Hold Permanent
Schedule Schedule
Schedule
Up Down Hold
Schedule
Hold Schedule
Hold Permanent
Hold
Schedule
System
Mode
Heat
Set To
HEAT
AUTO
ENTER
MENU
HOLD
Inside
Th
AM
NEXT
Selecting Fan Auto or Cont
Press the key to select or (Continuous) fan operation. In the thermostat activates the fan during heating and cooling calls. In the fan runs continuously to circulate air.
Fan Auto Cont
Auto
Cont
Schedule
Mode in
Schedule
MENU HOLD
Inside
Day
NEXT
Heat
Set To
HEAT
Th
AM
AUTO
ENTER
Day
Schedule
HOLD Key
Setting the Heating and Cooling Temperature
Press the hold the Up or Down key to change the heating or cooling temperature. Press the Next key to switch between the heating and cooling temperature.
2
Schedule
Inside
Day
Schedule
Cool
Set To
HEAT
Th
AM
AUTO
Mode in
Day
Schedule
Press the key to display the morning heating ( ) temperature. Use the or keys to change the temperature
NEXT Heat
Up Down
Heat
Set To
MENU HOLD
NEXT
ENTER
NEXT Key
Setting the Time and Weekday
To set the time of day and the day of the week, press the key and the LCD will display the hour. Use the and keys to set the hour. Make sure that the AM or PM is correct.
Press the key to set the minute. Use the and keys to set the minute.
Press the key to set the current day of the week. Use the
Up Down ENTER
NEXT Up Down
NEXT
and keys to select the day of the week and press the
key.
Th
AM
Up Down
MENU
Schedule
Press the key to display the morning Cooling ( ) temperature. Use the or keys to change the temperature.
Continue using the key and the and keys to set the start time, heating temperature and cooling temperature for the , and schedules.
After the schedule is completed, you can press the
ENTER
have programmed. To apply the same schedule to other days of the week, press the
NEXT
NEXT Cool
Schedule
Day Evening Night
Night
key which will only save the schedule for the day you
key.
Morn
AM
CANCEL
Up Down
CANCEL
NEXT Up Down
NEXT
Morn
AM
NEXT
Cool
Set To
CANCEL NEXT
Changing the Schedule
Press and hold the key until the LCD displays the schedule screen show below. Press and hold the or key to change the morning ( ) schedule start time.
Schedule
MENU
MENU
Morn
Morn
AM
CANCEL NEXT
ENTER
Up Down
Schedule
Monday through Sunday will appear on the LCD along with a large in the upper right corner of the LCD. This
01
number represents Monday. Press the key again and will appear which represents
02
Mo
TuWe Th Fr Sa Su
CANCEL NEXT
Night
PM
ENTER
NEXT
3
Tuesday, and so on. Use the key to advance to each day of the week. Use the and keys to turn days or
. The schedule will be applied to the days that are .
OFF ON
These days will be displayed on the thermostat.
Pressing the key saves the schedule in non-volatile ram memory.
The example below shows a schedule being applied to Monday through Friday. This might represent a typical residential schedule where the occupants work during the week and are home on the weekends.
Up Down ON
ENTER
NEXT
Displaying the Time and Temperature Schedule
Press and hold the key until the first schedule is displayed as shown below. The display will show the Monday morning scheduled start time and heating temperature. setting.
MENU
Heat
Set To
Schedule
To set a different schedule for Saturday and Sunday, the
Changing the Schedule
Friday would be left and Saturday and Sunday left Pressing the key will save the Saturday and Sunday schedule and the thermostat will resume normal operation.
ENTER
Mo
TuWe Th Fr
PM
CANCEL NEXT
sequence is repeated. Monday through
OFF ON.
ENTER
Schedule
Continuing pressing the key to display the morning, day, evening and night schedule along with the heating and cooling temperatures for each day of the week. Press the key at any time to exit and return the thermostat to normal operation.
Morn Mo
AM
CANCEL NEXT
NEXT
CANCEL
Low Battery Indication
If the battery voltage drops to where it could interfere with reliable operation, the LCD will alternately display in place of the Inside temperature. .
Replace batteries immediately
Lo
Schedule
PM
CANCEL NEXT
Night
Sa Su
ENTER
Heat
Set To
AUTO
ENTER
Schedule
MENU HOLD
Inside
Day
Th
AM
NEXT
5418 Elmwood Avenue, Indianapolis, IN 46203-6025
All rights reserved.
Jackson Systems, LLC 2010
©
Intellectual rights apply.
06-1056-012910
4
Loading...