Winycam V300 HD User Manual
V300HD User Manual
Ver. 02
WINY Technology Co., Ltd.
http://winycam-eng.com
Contents
# Precautions
- Precautions for safety when using the product 3p
- Precautions when using a SD card 4p
- Precautions when using a Battery 5p
1. Package 6p
2. Product Features 7p
3. Function 8p
4. How to Install 9p
5. How to Record 10p
6. LED Operation Guide 11p
7. Voice Guide 12p
8. How to Install Original Viewer Program 13p
9. Original Viewer - Screen Configuration 14p
9-1. Original Viewer - Playback 15p
9-2. Original Viewer – GPS 16p
9-3. Original Viewer – Configuration 17p
9-4. Configuration Default Settings 19p
10. Play and set the configuration by smartphone 20p
11. Firmware Update 21p
12. SD card Format 21p
13. Specification 22p
14. Recordable Time 22p
# Warranty
Precautions for safety when using the product
1. Please do not operate the product during driving. It may cause accidents.
2. Please install the product in a place not to interfere with a driver's view.
3. Do not disassemble or convert the product intentionally. It may lead to product failure and the responsibility for the damage to the product resulting from this
shall be borne by the user.
4. When damage to the product itself occurs due to a major accident or the power is disconnected, images of the accident may not be recorded.
5. Please keep the windshield clean at portion of recording before recording.
6. Since this product is a device that records a driving video by using the camera, the image quality may drop when entering the tunnel, in shading contrast,
backlight and photometric conditions, and the middle of the night.
7. In case those foreign objects attach to camera lens, recorded video may not be in good condition. Please keep the lens clean.
8. Do not leave a product in a place exposed to the direct sunlight in a car or in a confined car. It may cause a malfunction.
9. Do not wipe the product using chemicals, detergents, etc., but wipe it lightly using a soft cloth.
10. The thermal environment at below -5℃ or over 55℃ may cause a malfunction or failure of the product. (When not using the product, please be careful about
storage temperature)
11. Do not use the product in a place at high temperature or much moisture.
12. Do not press excessive force to the products (especially buttons and bracket). It may cause a malfunction of the products.
13. Before using the product, make sure to operate it for 3 to 5 minutes and verify that the image saved properly and then use it.
14. If the product is in prolonged exposure to sunlight or high temperatures during the summer, normal operation can be difficult.
15. When firmware upgrade is in progress, if SD card is removed or a power is disconnected, failure of the product may occur, so should be careful.
16. When removing or disconnecting the cigarette lighter cable, it may result in electric shock, so do not touch it with wet hands.
17. Do not use the damaged cigarette lighter cable. It may cause fire and electrical shock.
18. Do not leave the cigarette lighter cable or the product near heating equipment.
19. When not using the product for the long-term, please separate off the cigarette lighter cable from the product.
20. Please plug the cigarette lighter cable correctly and should not be shaken.
21. Do not bend or pull the cigarette lighter cable forcefully or avoid placing heavy objects on the cigarette lighter cable. (A damaged power cord may cause fire
or electric shock)
22. Even if overwrite function is in ‘Off’ condition, a part of recorded file may be deleted to create some recording space at booting.
23. In the lower frame setup, the event may not be recorded. For the stable event recording, recording setup is greater than or equal to 15 frames is
recommended.
Precautions when using a SD card
1. In order to confirm normal operation of the product, please check the image of a SD card and format it on a regular basis.
(PC format needed one to two times per month)
2. Because an SD card is consumables, if it is used for a long time, you may lose the data or may not record due to an error, so please
check it periodically.
3. When the product is in recording or the power is on, do not eject the SD card forcibly. It may cause a failure of the SD card and data
loss.
4. Due to excessive temperature rise inside the car, the data may not be saved or get damaged, so please park the car in a cool place in
the summer.
5. When identify the car's accident or damage, please keep the SD card separately. Due to overwrite, important data may be deleted.
6. When turn off the power of the body and remove the SD card before LED is turned off, the last recording file may not be saved, so
please be careful.
7 In general, the SD card is a consumable product in life, so if it is not used for a long time, you may not be able to save the data. In this
case, buy a new SD card and use it, and please always check that the recorded images and a SD card have no problems with data storage.
8. When driving a car, do not remove the SD card. Make sure to remove it safely when a car is in parking or stop.
9. After turning on the power, make sure that it is in normal operation.
10. Please note that the warranty period of an SD card is six months, and replace it at the time of more than six months.
11. The SD card randomly purchased other than the one we provide, shall be excluded from the warranty, and we shall not take any
responsibility for loss and damage of the data recorded in the SD card in any case.
12. After check playback recorded video on a Smartphone (support an Android only), remove the SD Card and follow below.
Menu → Configuration → System → Mode change space → SD Card un-mounting
(if you do not "SD Card un-mounting“, SD Card might be damaged.)
# This product is assistant device for recoding driving video.
Please use this product for your reference for checking driving video,
not as special CCTV because the image might not be record depend on environment.
# This product might change without any notice for performance improvement.
# This user manual indicate only basic user manual, please check furthermore detail information from http://winycam-eng.com
Precautions when using a Battery
※ Please follow below otherwise Heat Generate, Fire, Explosion, etc might happen.
1. Contact the manufacture or distributor if battery bellowed up even by the naked eye.
2. Use only packaged battery and do not modify and disassemble.
3. Never put this built-in battery product close to fire.
4. Do not leave product for long time inside the car in summer.
5. Use Warranted lithium polymer portable charger by manufacture.
6. Do not disassemble, crimp, destroy.
7. Do not drop from high location and give shock to product.
8. Do not leave product in location that is over 60˚C.
9. Do not leave a product in the humid location.
※ Battery Disposal Instructions
# Do not throw away a used battery.
# When disposing of a battery, do not burn and put them in a fire. (Due to heat, it may cause an explosion or fire.)
# Battery disposal may vary by country and region. (Please dispose it properly).
1. Package
Package
Body & Bracket
Package
Cabling Clip 3pcs
The viewer program is stored in Micro SD card.
Please use after saving the program in advance in the computer, etc. so that the program can’t be deleted.
(If it is deleted, you can download it from our website.)
The packaged product picture of the user manual may differ from the actual product.
Video cable is used for connection to the TV / car navigation, and can monitor real-time. But please note that depend on monitors,
Video input type is different and check the user manual of monitor.
Car Cigar jack Micro SD card Card Reader User Manual
Option Accessory
Video Cable
(Selling separately)
GPS Bracket
(Selling separately)
2. Product Features
1. 2 Mega Pixel image sensor mounting.
2. 150 degrees (based on lens) wide mega lens (based on actual recorded video) are applied.
3. HD (1280X720) resolution and 30FPS are supported.
4. Security LED light are mounted on front body (LED Lighting function On/Off can be set in PC viewer)
5.
6. G sensor built-in Automatic parking recording mode change and event recording mode.
7. Various recording functions - normal, manual, event, motion, automatic parking recording mode change.
8. Operating instructions service by voice guidance.
9. External video output. (real-time video image can be checked)
10. Soft look and emotional design. (easy removable body)
11. Driving records can be stored with GPS data. (optional)
12.
13. High performance microphone built-in
14. Back-up battery built-in (safety backup power support)
15. Memory back-up is available by flash memory, even in the error occurred when firmware is in upgrade.
16.
17. SD card can be formatted as the product itself, without connecting to a PC.
18.
Car constant power discharge protection function (setup is available in PC viewer) is built-in. Separated power
discharge safety equipment is not necessary.
PC viewer software are provided to change various setting values and map data can be checked when using GPS. (In
the general video player (e.g. Windows media player), recorded video can be played)
When car constant power discharge functions in setup, the dark current of less than 2mA is consumed. (based on
12V)
When using car constant power discharge protection functions, If user car voltage is 12V and the voltage of less than
11.8V is maintained for more than 30 seconds the product power will be shuts-off. In case user car is 24V, power will
be shut down after 30min with less than 24V. (Note: Shutdown time depend on the Type of Car and car condition.)
19. Voice recording On/Off function and speaker output On/Off function.
20. Each capacity of normal/ event/ motion folder can be set in PC Viewer.
21. Recording image resolution can be set to change. (HD/D1/VGA)
3. Function
1. Bracket (GPS Bracket: Selling separately) 8. Microphone
2. Up-down adjustment screw 9. Record LED
3. Security LED 10. Power LED
4. Camera Lens 11. Speaker
5. GPS Connection 12. Record Button (for manual)
6. External Video Cable(Selling separately) 13. Micro SD card Slot
7. Power Input
Loading...