Wintal SX-EX01 Instruction Manual

Page 1

Operating Instructions

Safety

WARRANTY

If your product does not work properly because of a defect in material s or workmanship, our Company (referred to as "the warrantor" ) will, for the length of the period indicated as below,

(Parts(1)Year,

(Parts(1)Year, Labor(90)

Warranty period"), at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be made by the warrantor. During the "Labor" Limited Warranty period there will be no charge for labor. During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

M AIL

When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

check:

Safety

Safety check:

confirm that the unit is in proper working condition.

AIL

-I

AIL

-I

AIL -I

-I N

N S

After repairs or service, ask the servicer to perform safety checks to

check:

Labor(90)

Labor(90) Days)

ERVICE

S ERVICE

ERVICE

Days)

which starts with the date of original purchase ("Limited

Days)

LIMITED

LIMITED WARRANTY

1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God.

2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OU T OF ANY BREACH OF THIS WARRNTY. (As example s,this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or image s,data or other recorded content. The items listed are not exclusive, but are for illustration only.)

3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE

WARRANTY

WARRANTY LIMITS

YOUR RESPONSIBILITY.

LIMITS

LIMITS AND

AND

EXCLUSIONS

AND

EXCLUSIONS

AND EXCLUSIONS

EXCLUSIONS

Operating Instructions

Page 2

HDMI

HDMI Extender

Model

Model No.

Extender

No.

SX-EX01

No.

SX-EX01

No. SX-EX01

SX-EX01

Operating

Operating Instructions

Dear

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

FEATURES

Easy to use: Install in seconds, no need for setting

�

One pair as a full functional module, no need for setting

�

Use UTP LAN cable (CAT5e/6) to substitute HDMITMcable to achieve long

�

distance transmission

UTP cable termination follows the standard of IEEE-568B

�

Extend high definition displays up to 60 meters from the source at 1080P

�

HDMITM(V1.3 with deep color)

�

With LED indicators to show the power and video signal status

�

HDCP compliant

�

Customer

Instructions

NOTICE

Our company reserve the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.

Operating Instructions

Page 3

TABLE

TABLE OF

Specifications Package Contents Panel Descriptions Connecting and Operating M aintenance Product Service Warranty

SPECIFICATIONS

Operating Temperature R ange ……………………… ....... … -5 to 3 5℃(-41 to 95℉)

Operating H umidity R ange ……………………… ... 5 % to 90 % RH ( N o C ondensation)

Input Video Signal …………………………… ... … .. …………… .......0.5-1.0 Volts P-P

Power Supply ……………………………………………………………… .. … DC5V,2A Video Format Supported …………………… 1080P/1080i/720P/576P/480P/576i/480i

Dimension (L × W × H) …………………… .. ………………………… . … .... 83x46x23mm

Net Weight …………………………………………………………………… .213 g (Pair) Note: Specifications are subject to change without notice. Mass and dimensions are approximate.

CONTENTS

OF CONTENTS

CONTENTS

PACKING

PACKING CONTENTS

1) Main Unit. Transmitter&Receiver HDMI Extender

2) DC5V 2A Power Supply

3) Operating Instructions

PANEL

PANEL DESCRIPTIONS

CONTENTS

DESCRIPTIONS

Transmitter Panel

① ②

Operating Instructions

Page 4

Receiver Panel

③ ④ ⑤ ⑥

1. C AT-5E/6 output1 and output2 2. HDMI input 3. CAT-5E/6 input1 and input2

4. S tatus of power input 5. S tatus of signal connection 6. HDMI output

CONNECT

CONNECT ING

1) Connect the HDMI signal sources (Such as PS3, STB etc) to HDMI Transmitter .

2) Connect two CAT6 cables to both the outputs of the transmitter and inputs of the

3) Connect the HDMI output ( S uch as HD-LCD, HD-DLP) into the Receiver.

4) Remark: In most cases the power adapter could be taken off. The power adapter is

Attention: Insert/Extract cable s gently.

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.

PRODUCT

PRODUCT SERVICE

1) Damage The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have gotten into the unit; (c) The unit has been exposed to rain; (d) The unit does not operate normally or exhibits a marked change in performance; (e) The unit has been dropped or the cabinet damaged.

2) Servicing these operating instructions.Refer all other servicing to authorized servicing personnel.

3) Replacement

ING

AND

ING

ING AND

Receiver. And note that the right connection of the two cables, CAT6-1->CAT6-1 (The cables must follow the standard of EIA-TIA 568B) .

only needed when the signal source has no sufficient power driving ability.

SERVICE

Damage

Damage requiring

Servicing

Servicing Personnel:

Replacement

Replacement parts:

specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

requiring

requiring service:

OPERAT

AND

OPERAT

AND OPERAT

OPERAT ING

service:

Personnel:

Personnel: Do not attempt to service the unit beyond that described in

parts:

parts: When parts need replacing ensure the servicer uses parts

ING

Wintal SX-EX01 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual