Wintal RFMX3 Instruction Manual

MINI UHF TRIPLE INPUT MODULATOR

MODEL: RFMX3

OWNER’S M A N U A L

(PLEASE READ BEFORE USE)

CHAPTER TABLE OF CONTENTS P A G E

1. Important-Safety Precautions……………………………………..2

2. The Modulation System……………………………………………3-5

3. System Control………………………………………………………5

4. Installation Of System………………………………………………6-7

5. Trouble Shooting……………………………………………………8

1

1. Important-Safety Precautions

• To avoid electrical shock, do not take apart this device.

• This device should use only the power supply included with it or provided as

an accessory.

• Do not overload wall outlets and extension cords as this can result in the risk
of fire or electrical shock.

• Do not attempt to service this device yourself. Refer servicing to qualified

personnel only.

Note:

This device has been tested and found to comply with the limits for a class B
digital device, pursuant to the FCC Rules, or BZT and CE EMC directive. These
limits are designed to provide reasonable protection against harmful interference in
a residential installation. If not installed and used in accordance with the instruction,
it may cause harmful interference to RF communications. However, there is no
guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to RF or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Increase the separation between the device and receptions.

• Connect the device into an outlet on a circuit different from that to which the

receptions are connected.

• Use better quality coaxial cable and avoid sharp bends.

• Consult the dealer or an experienced RF/TV technician for help.

Caution: Changes or modifications not expressly approved by

the Party responsible for compliance could void the user’s
authority to operate the equipment.