Wintal PDVD20HD Instruction Manual

PROGRESSIVE SCAN
HDMI DVD PLAYER
WITH USB PLAYBACK
USER MANUAL
576P
|
720P | 1080i HD
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. SERVICING THE UNIT MUST ONLY BE CARRIED OUT BY QUALIFIED SERVICE PERSONNEL.
The lightning  ash with arrowhead symbol within the equilateral triangle is to alert the user to the presence of dangerous voltages inside that may be of su cient magnitude to constitute a risk of severe electric shock.
The exclamation point within the equilateral triangle is to alert the user of the presence of important operating and maintenance (servicing) Instructions in the literature accompanying the appliance.
Laser product symbol: located on the rear panel of the unit, indicates this player is a class 1 laser product, only use weak laser and non hazardous radiation outside of the unit.
Please read through this instruction manual before installation and use.1. Do not touch the power plug with wet hands.2. Switch o the main power when the unit is not in use. (Disconnect the power plug from 3. the power outlet when you do not intend to use the unit for a prolonged period of time.) Before moving the unit, remove the disc from the tray. Do not open the cover, service can only be carried out by a quali ed technician.4. To avoid damage the unit, do not expose the unit to moist and humid conditions or operate 5. it in direct sunlight or place it near objects that radiate heat. Operate the unit on a  at surface and in a well ventilated area. Ensure the ventilation holes 6. are not covered to avoid overheating and malfunction. Clean the front panel and case with soft cloth only, do not apply any kind of chemicals 7. thinners, or sprays. The unit must not be exposed to water spills, dripping or splashing, do not place objects 8.  lled with liquids such as vases that may be knocked over on the unit. To avoid damage from mains voltage surges or spikes unplug the unit when it wont be 9. used for a long period of time .
DOLBY PRO LOGIC:
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
CONTENTS
Precautions .................................................................................................................................... 1
Front and rear panel illustration ............................................................................................. 2
Remote Control ............................................................................................................................ 3
Connections .................................................................................................................................. 4
Function Operation .................................................................................................................... 7
Cd & mp3 playing ...................................................................................................................... 11
Kodak picture cd playback ..................................................................................................... 11
System Setup .............................................................................................................................. 12
Troubleshooting ........................................................................................................................18
Technical Speci cations ..........................................................................................................20
1. PRECAUTIONS
Before using this unit, be sure to read the applicable items of the operating instructions and the safety precautions carefully. Keep the instruction manual handy for future reference.
Safety
Power Source-The unit should only be connected to the mains power supply as described In the operating instructions or as marked on the unit.
Environment
Water and moisture do not use this unit near water.1. For example, near a bathtub, wash bowl, swimming pool, or the like, Damp basements should also be avoided. Condensation-moisture may form on the lens In the following conditions:2. Immediately after a heater has been turned on.
In a steamy or very humid room.
When the unit Is suddenly moved from a cold environment to a warm one. If moisture forms Inside this unit it may not operate properly, to correct this problem wait about one hour for the moisture to evaporate. Never use or place this unit near a heat source.3. Do not leave It In an automobile exposed to direct sun light for a long period of time or with the doors and windows closed as excessive heat may deform the cabinet.
1
2. FRONT PANEL AND REAR PANEL ILLUSTRATION
Front panel
8
Rear panel
12
9 75 861 2 3 4
3
4
56
7
2
3. REMOTE CONTROL
1
2
3
4
5
6
7
8
9
10
11
12 13
14 15
16 17 18
1. STANDBY
19
2. MUTE
3. OSD
20
4. A-B REPEAT
5. REPEAT
21
6. MENU/PBC
22
7. UP/DOWN/
23
LEFT/RIGHT
8. ENTER
9. SLOW
10. PLAY/PAUSE
11. PREVIOUS/NEXT
24
12. STOP
13. PROGRAM
25
14. AUDIO
15. RETURN
26
27
28 29
30
16. ANGLE
17. V-MODE
18. HDMI
19. OPEN/CLOSE
20. NUMBER BUTTONS
21.CLEAR
22. GOTO
23.SETUP
24. STEP
25.FAST REVERSE/
FAST/FORWARD
26. P/N
27. ZOOM
28. SUB-T
29.TITLE
30. VOLUME -/+
Using the Remote Control
Unless stated other wise, the remote control can operate all the features of the DVD Player, Always point the remote control directly at the remote sensor on the front of the DVD Player, not at the TV.
Battery Installation
To remove the battery compartment lid on the rear of the remote control slide it down then lift it o . > Fit two AAA batteries inside the battery compartment as indicated. > Do not mix old and new batteries or di erent types of batteries > Replace the battery compartment lid. Slide the lid until you hear it click into place.
3
4. CONNECTIONS
Tur n o the power before connection.
•Turn on the power after  nishing connection. Plugs and cables must be  rmly connected; ensuring plugs are fully inserted.
DVD+TV
Notes :
Connection options between the player AV output and the TV are as follows:
Composite video cable and left/right audio cable, this is the most common and simplest analogue connection, but o ers the lowest quality picture. S-video cable and left/right audio cable, o ers better analogue picture quality than composite (set the video type to component) Component video cable and left/right audio cable o ers the best analogue picture quality (set the video type to component, if you connecting a progressive scan TV set, please set the video type to P-Scan) HDMI cable o ers the best available digital picture and audio quality (press V-MODE button to switch video modes from Component, P-Scan, HD, set the video out to HD)
To CR/PR video output
To CB/PB video output
To Y video output
To HDMI input
To Y video input
To CR/PR video input
To CB/PB video input
Connecting to TVs 1. with HDMI Cable, 2. YUV with Component cable HD mode
Connecting to a TV with Audio/Video cable
To video input(yellow) To audio inputs(red, white)
To S-video input
To S-video output
If the TV has an S-video input, connect the DVD player with an S-video cable when using an S-video cable, do not connect the yellow video cable.
4
Connecting to a audio system and TV equipped with YUV video input
To CB/PB video output
To CR/PR video output
To Y video output
To audio inputs of the amplifier
To Y video input
To CR/PR video input
To CB/PB video input
The setup by default of this player is CVBS output, to change to HDMI or other, go to setting on the SETUP MENU.
DVD+AV Ampli er: Notes:
There are the following ways of connecting the player with ampli er:
1. Coaxial audio output
2. Left/right audio output
Connecting to an ampli er equipped with a digital audio input and TV
Optical digital cable
Connect either
To CB/PB video output
To CR/PR video output
To Y video output
To Y video input
To CR/PR video input
To CB/PB video input
To COAXIAL
type digital audio input
To OPTICAL
type digital audio input
Coaxial cable
Connecting to an ampli er equipped with 5.1ch audio input and TV
To 5.1ch audio inputs
FLFR
SL SR
SUB CEN
To 5.1ch
audio outputs
Audio cable
SL SR
FLFR
SUBCEN
To video input
5
Loading...
+ 16 hidden pages