Wintal HT-6100 Instruction Manual

1

HDMI Media Center

6 inputs 1 output

Switch  Convert  1080P Up-Scaling

HT -6100

INTRODUCTION

Congratulations on your purchase of the HT-6100 HDMI Media Center. Your satisfaction is very
important to us. HT-6100 is the product that can offer the best integration solution for your home
entertainment equipment.

HT-6100 is designed for HDMI, VGA and analog sources selection. It solves the inconvenience
of changing cable connection. HT-6100 is a switcher, converter and scaling box. It enables users to
keep their non-HDMI source devices to use with more advanced HDMI input device. With HT-6100,
the VGA, composite, component, and s-video signals can be converted to HDMI signal.

FEATURES AND CONTENTS

For the best performance of HT-6100, please read this manual carefully and keep it for further
information.

Features:

 HDMITM (v1.3, HDMI Input Pixel Clock Rate: 25MHz ~ 225 MHz)
 Support video up scaling to 1080P (Pixel Clock Rate: 25MHz ~ 165 MHz)
 3D Y/C separation Comb-filter
 10 bits video processor for A/D conversion
 Support IR remote control and manual control
 Convert analog audio and video signal to digital HDMITM signal; and switch among 6 sources,

which including 2 HDMITM, 2 analog (AV, s-video, or YPbPr) and 2 VGA.

 Gold plated connecters
 Support HDCP compliant devices (HDMI inputs)
 Fashionable metal housing design, free of interference

Content of Package

 DC 5V/4A Power Adaptor
 HT-6100 Media Center main unit
 IR Remote Controller
 User’s manual

2

Blue-ray DVD

Power
Adaptor

Rear Panel

PS3

XBOX 360

TM

Computer

IPTV Box

TV

Wii

ILLUSTRATION

Front Panel

Rear Panel

CONNECTION ILLUSTRATION

Connect your devices to HT-6100 Media Center

1. Connect the HDMI cables from your displays (monitor or projector) to the outputs of the HT-6100.

2. Connect the input sources to the input ports of HT-6100. (You can connect 2 HDMI sources to the
HDMI inputs of HT-6100, 2 VGA sources to the VGA inputs of HT-6100, and 2 analog sources to the
analog inputs of HT-6100.)

3. Plug the power adaptor to an AC power outlet. Plug the 5VDC output power plug into the DC jack of
HT-6100 Media Center.

4. Turn on the power of your source device that you are going to use.

5. Check the power of HT-6100. If the power LED light is not on, please press the power key to turn on
the power of HT-6100.

6. Check the input indication LED at the front panel. Please press the button of input source to choose
input source. For example, if your want to choose HDMI input 1, please press the key with “1” in the
HDMI.

7. Use the “RES.” key to adjust the resolution.

8. Use IR Remote control for more control features.

CONNECTION AND OPERATION