Wintal DVDR-X5 Owner's Manual

Safety Symbols

Safety Precautions

SAFETY INSTRUCTIONS

This symbol indicates there is a dangerous voltage within the DVDR-X5 housing, which may have sufficient magnitude to constitute a risk of electric shock if not handled correctly. To avoid the risk of electric shock, do not open the housing at any time.

This symbol identifies important operating and maintenance (servicing) instructions. Be sure to follow instructions identified with this symbol to avoid potential damage to your unit.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

DO NOT STARE INTO BEAM OR BLINDNESS MAY RESULT. This DVD Recorder employs a laser system. To prevent direct exposure to laser beam, do not try to open the enclosure or defeat the interlocks. Use of controls, adjustments or the performance of procedures other than those specified may result herein hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated.

Other Precautions

l Do not put any objects in the tray other than approved video and audio discs.

l Do not open the unit, touch the inner parts or insert any foreign objects into the unit.

l Place the unit on a level, open surface. Do not locate the unit under direct sunshine, near heating devices or in

very dusty or dirty places. Otherwise, the unit may be damaged.

l Hold the plug tight when connecting or disconnecting the AC power supply. Do not put any weight on AC

cord or attempt to service the AC cord if it becomes damaged.

l Keep unit away from open windows or near anyplace where water may get into the unit and damage it.

l Do not stack heavy objects on the unit.

l Condensation may form in the unit when moving it from very cold to very warm or humid locations. In such

cases, wait for the unit to come to room temperature and the condensation to evaporate before using the unit.

Do not place the unit near radio receiver or other video or audio devices. Should a nearby radio receiver experience interference while the unit is running, turn the DVDR-X5 unit off.

SAFETY INSTRUCTIONS

1.Read this Manual

After unpacking this product read the manual carefully and follow all the operating instructions.

2.Power Sources

This product should be operated only from the type of power source indicated on the unit. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

3.Grounding or Polarization If the plug cannot be inserted

Properly into the socket. or if the plug does not fit, the device must not be used in your country.

5.Heat

Position the unit away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

6.Water and Moisture

Do not use this product near water such as near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool or the like.

7.Cleaning

Unplug this product from the A/C outlet before cleaning. Use a damp cloth to clean the unit. Do not use liquid or aerosol cleaners.

4.Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure operation of the product and

to protect it from overheating. Do not block or cover these openings.

8.Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

9.Overloading

Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.

SAFETY INSTRUCTIONS

10.Lightning

Unplug the unit from the wall outlet during storms to prevent damage from lightning and power surges.

11.Objects and Liquids

Never push objects into this product as that could result in a fire or electric shock. Never spill liquids on the product.

12.Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

13.Accessories

Do not place this product on an unstable platform. The product may fall, causing serious injury or serious damage to the product.

14.Disc Tray

Keep your fingers clear of the disc tray as it is closing. Neglecting to may cause serious personal injury.

17.Damage Requiring Service

Unplug the unit from the A/C outlet and refer servicing to qualified service personnel under the following conditions: a) When the power cord or plug is damaged. b) If liquid has been spilled into or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally. e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance.

18. Servicing

Do not attempt to service this product yourself as this may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. Replacement Parts

Be sure the service technician has used authorized replacement parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

15.Burden

Do not place heavy objects on the product. The object may fall causing serious personal injury and serious damage to the product.

16.Discs

Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product Malfunction.

20.Safety Check

Upon completion of any service or repairs, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21.Splashing

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

SAFETY INSTRUCTIONS

PRODUCTS WITH PROGRESSIVE SCAN OUTPUTS (525P/625P)

NOTICE REQUIREMENTS

(From the 525p/625p Addendum to the DVD License Agreement)

Licensee will incorporate the following wording, as appropriate, together with the applicable list of Licensee's high definition television sets, in all product manuals or the like applicable to any DVD Recorder with a YUV progressive scan output:

For DVD Recorders with 525p, but not 625p, progressive scan output:

'CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT.IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.'

For DVD Recorders with 625p, but not 525p, progressive scan output:

'CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT.IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.'

For DVD Recorders with both 525p and 625p progressive scan outputs:

'CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE.IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT.IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.'

SAFETY INSTRUCTIONS

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories.

CE: The DVD recorder is in conformity with the EMC directive and low-voltage directive.

1. Please be sure on the condition of STANDBY prior to power off.

2. To prevent improper condition, restarting within five minutes since power off shall not be advised.

3. The playing effect shall not be assured if user operates the products with bad quality DVD+RW discs.

4. If this DVD+RW has been stay under 0 temperature for more than 30minutes, Please keep it

in an warmer environment (over 15 temperature) before you plug in.

¡æ

SHORTCUT FOR OPERATION

Connections

1. Use the AV cable to connect to the DVD+RW 'S AV output and the TV AV INPUT.

2. Use the SCART cable to connect to the DVD+RW 'S SCART output and the TV SCART INPUT

VIDEO OUTPUT

STEREO AUDIO IN

TV with

Composite

Video Input

(Typical

Connection)

SCART OUTPUT

3. Use antenna or cable TV connection to connect to RF INPUT, and RF OUTPUT connect to TV ANTENNA.

TV with

Composite

Video Input

(Typical

Connection)

4. Plug the standard jack end into a wall socket or power strip.

SHORTCUT FOR OPERATION

Play

1. Press the OPEN/CLOSE key, open the tray, insert a disc, and press PLAY (front panel or remote control) to begin playback a disc.

FRONT PAN EL

Lab eling Side

Surface

Recording

1. Insert a blank DVD+R/RW disc.

2. Make sure the connection from the TV to recorder are secure.

3. To scan TV channels by SCAN CHANNELS in the setup menu.

SYSTEM SETUP

Tuner input source

Scan channels

modify channel information

Start auto scan channel

4. After TV channel scan finished, press CH+ /CH- or 0-9 key to select a channel as source, Press "REC" on

remote control (or front panel) to start recording. Press PLAY/PAUSE on front panel (or PAUSE on remote

control )to pause recording, second press REC to continue recording. Press STOP to stop recording.

Air

SCAN

EDIT

FRONT PANEL

CONTENTS

INTRODUCTION

DVD+R/RW Recorder and Progressive scan Player . . . . . . . . 9

Opt ica l dis c com pat ibi lit y . . . . . . . . . . . . . . . . . . . 10

Car ing f or op tic al di scs . . . . . . . . . . . . . . . . . . . . . 1 0

INTRODUCTION

Make sure the package contents are complete . . . . . . . . . . . . 11

Installing batteries in the remote control . . . . . . . . 11

Ope rat ing t he re mot e con tro l . . . . . . . . . . . . . . . . . . . .11

FUNCTIONAL OVERVIEW

Rem ote c ont rol . . . . . . . . . . . . . . . . . . . . 1 2

Fro nt pa nel . . . . . . . . . . . . . . . . . . . . . . . 13

Fro nt VF D dis pla y . . . . . . . . . . . . . . . . . . . . . . . . .14

Bac k pan el . . . . . . . . . . . . . . . . . . . . 15

CONNECTIONS

Connecting the Video output to your TV . . . . . . . . . . . . . 16-17

Aud io ou tpu t con nec tio ns . . . . . . . . . . . . . . . . . . 18

Ant enn a & TV conne ctions . . . . . . . . . . . . . . . . . . . . . . 1 8

Connecting Audio/Video recording

sou rce s to th e A/V In put s . . . . . . . . . . . . . . . . . . . . . 19

AV Inputs (VIDEO IN2, S-VIDEO IN2). . . . . . . . . . . . . . . . . 19

DVD RECORDER OPERATION

Pow eri ng on t he un it . . . . . . . . . . . . . . . . . . . . . . 20

Ini tia l Setup Pr oce dure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Usi ng th e men us . . . . . . . . . . . . . . . . . . . . . . . . . 20

Ins ert ing a D isc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Usi ng Di sc me nus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Bas ic di sc pl ayb ack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 22

Adv anc ed pl ayb ack . . . . . . . . . . . . . . . . . . . 2 3

Slo w mot ion p lay bac k . . . . . . . . . . . . . . . . . . . 23

Rep eat ing a s egm ent y ou de fin e . . . . . . . . . . . . . . . . . . . 23

Mul ti- ang le fu nct ion . . . . . . . . . . . . . . . . . . . 2 4

Cha ngi ng th e aud io tr ack . . . . . . . . . . . . . . . . . . . 2 4

Sub tit les . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4

View ing J PG fi les . . . . . . . . . . . . . . . . . . . . . . . . 2 5

Pla yin g MP3 f ile s . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

MODE SELECT . . . . . . . . . . . . . . . . . . . . . . . . 36- 37

DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . ..3 7-3 8

Edi t a tit le of D VD+ RW . . . . . . . . . . . . . . . . . . . . . . . . 39

Cha pte r edi t . . . . . . . . . . . . . . . . . . . . . . . . 39

Edi t a dis c of on t he DV D+RW . . . . . . . . . . . . . . . . . . . . . . . 4 0

TROUBLE SHOOTING

Pla yba ck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Reco rd ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . 42

ATTACHMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

RECORDING

Int rod uct ion t o rec ord ing . . . . . . . . . . . . . . . . . . . . . . . . 2 6

Set tin g rec ord ing o pti ons . . . . . . . . . . . . . . . . . . . 2 7

Set tin g the a uto c hap ter o pti on . . . . . . . . . . . . . . . . . . 27

Che cki ng th e Time a nd Da te . . . . . . . . . . . . . . . . . . 27

The Ti tle s cre en . . . . . . . . . . . . . . . . . 28

Type s of Re cor din gs . . . . . . . . . . . . . . . . . . . . . . 28

Mak ing a L ive R eco rdi ng . . . . . . . . . . . . . . . . . . 28

Recording 29

Tim er Re cor din g . . . . . . . . . . . . . . . . . . . . . . . . . 29- 30

SYSTEM SETUP

Gen era l . . . . . . . . . . . . . . . . . . . . . . . . . . ..3 1

Pla yba ck . . . . . . . . . . . . . . . . . . .. 31

Rec ord . . . . . . . . . . . . . . . . . . . . . . . . . 3 2

Lan gua ge . . . . . . . . . . . . . . . . . . . . . . . . . . .3 3

Cha nne l sca n . . . . . . . . . . . . . . . . . . . . . . . . .34

Clo ck . . . . . . . . . . . . . . . . . . . . . . . . .. 35

INTRODUCTION

DVD+R/RW Recorder and Progressive Scan Player

JPG

PROGRESSIVE

SCAN

Your DVDR-X5 is a progressive scan DVD Recorder. The recording provides you the ability to create your own DVD discs from your home movies, favorite TV programs and more. Because of the outstanding compatibility of DVD+R/RW discs, the discs you create will be suitable for playback in most DVD Recorders. You can record from the unit's built-in TV Tuner or an external video source like a video camera. And when you're ready to watch your recordings or commercial DVDs, you can enjoy them in the highest quality with the unit's Progressive Scan Video Out and Digital Audio Out.

DVD+R/RW Recorder

l Record from your TV, camcorder, VCR, CD's, DVD's l Live, Timer and Scheduled Recording Functions l Multiple Recording Modes, HQ, SP, EP, SLP l Up to 6 Hours Recording on one DVD+R/RW Disc l On-Screen Disc Title Navigator gives you quick,

easy access to your Recordings

l Built-In TV Tuner, Front and Rear A/V Inputs l Editing features with Add/Del, Hide Chapters l Your recordings are playable on most DVD

Recorders

Progressive Scan DVD+R/RW

lProgressive Scan Video with 3:2 pull down

Playback DVD+R, DVD+RW, DVD- R, DVD-RW, DVD, CD-R, CD-RW, SVCD, Mp3, JPEG,HDCD Kodak Picture CD.

l Component Video, S-Video and Composite Video

Outputs

l 96 kHz / 24 bit D/A converter l Stereo Audio out, Optical and Coaxial digital outputs. l Advanced playback functions: Slow playback, repeat

playback, parental control, MP3 player, JPG player, screen saver, Zoom In/Out, track selection, on-screen display and more.

INTRODUCTION

Optical disc compatibility

This unit is compatible with a wide range of available optical discs for recording and playback.

Discs suitable for Recording and Playback

You must use DVD+R or DVD+RW discs to record on this unit.

DVD+R: These discs can only be written to once. Existing recordings can be hidden but not deleted. So, any disc space already used by a recording cannot be regained. DVD+R discs are required to be "Finalized" before they will be compatible with standard DVD Recorders. Once a disc is finalized, no further recordings can be made.

DVD+RW: DVD+RW discs can be written to and erased multiple times. Existing recordings can be deleted and disc space regained. These discs do not require a finalization procedure. As soon as a recording is made, the disc will be compatible with standard DVD Recorders.

CD-AUDIO: An on-screen navigator is provided to select and play tracks when using CD-Audio discs.

CD-R/RW: This unit features an on-screen navigator for easy access to playable files stored on CD-R/RW discs, such as JPG images and MP3 music.

Caring for Optical Discs

Discs suitable for Playback Only

Units sold in Oceania are coded for Region 4, and are compatible with discs marked accordingly.

DVD-R/RW: These discs can be played back when recorded in standard DVD Video format.

TM TM

1. Hold a disc by the rim or with an index finger in the central hole. Never touch the signal surface.

2. Finger prints or stains on the surface of the disc may cause signal loss.

3. Use a soft cloth and wipe in a radiating manner from the center of the disc to the outer rims when cleaning the disc surface.

4. Never add labels or adhesive tapes on the discs be

careful not to scratch or damage the disc surface.

5. To prevent discs from becoming bent or deformed, they should be vertically kept in the disc storage case. to prevent damage, avoid leaving discs in your car, where they may be subject to direct sunlight and high temperature.

6. Do not use any disc accessory to improve the audio quality, disc protective solutions or lens cleaner. these products may damage the disc surface.

Labels

Tapes

Labeling Side

Surface

INTRODUCTION

Make sure the package contents are complete

In addition to the DVD recorder, your package contains the following accessories.

Remote control

Batteries (7) AAA

A/V cable (Composite

Video, Stereo Audio)

Installing batteries in the remote control

This unit comes complete with batteries for the remote control. When installing batteries, be sure to take note of the polarity markings on the inside of the battery compartment and match them up with those on the batteries.

Manual

Operating the remote control

When using the remote control, be sure to stay within a 30degree angle of the sensor (More than 3 meter )on the receiver. Keep in mind that any obstructions between the remote control and the receiver will effect performance.

Slide off the back cover

Install the batteries in the compartment.

Notes on batteries

1. If the remote control functions better when it is closer to the unit,

the batteries may be running low.

2. In case of any leakage of batteries, dispose the batteries

right away and avoid touching the chemical discharge.

Make sure to clean the remote control's battery

compartment before installing new batteries.

3. Do not mix batteries of different types, or use old batteries.

30 30

Remote Control

FUNCTIONAL OVERVIEW

1. OPEN / CLOSE - Open and

close the disc tray.

2. ZOOM - Press to magnify the

screen with DVD and JPG discs

3. A-B REPEAT - Sets the

beginning and end points of a section to repeat.

4. REPEAT - Selects a repeat

option Chapter, Title or Disc.

5. SLOW - Slow motion playback

mode in ,1/2,1/4 or 1/8 speed.

Press PLAY to resume normal playback.

6. REC MODE - Selects the

recording quality mode - HQ, SP, EP, SLP.

7. REC - Press to begin a live

recording.

8. SETUP - Accesses the on-screen

setup Menu for settings adjustment. Use direction keys

(UP/DOWN/RIGHT/LEFT)- To

highlight the item you desired.

9.UP/DOWN/RIGHT/LEFT-To

choose the item you desired.

10. STEP- Step to step to playback discs.

11. F.REV/F.FWD - Scan in fast

reverse or forward on DVD and other discs.

12. PAUSE - During playback of

a disc, chapter or track. Press

PAUSE to pause.

13/14. (CH+/-)/ - In TV tuner mode,

use to select a channel.

15. AUDIO - Selects an audio track on DVD discs and other discs.

16.MODE SELECT- PLAY,

EDIT RECORD, DISCMENU,

SETUP MENU, TIMER.

17. PAL/NTSC -Select the video

system for PAL, NTSC or multi system.

18. DISPLAY - Brings up the on-

screen display showing information for the playback session.

19. TIMER - Accesses the timer

menu for scheduled recording

Setup.

20. EDIT - Accesses the edit menu

for DVD+R/RW editing options.

22. NUMBER KEYS - Use to enter

numbers.

23. GOTO - To Select your desired

time, chapter of the disc to play.

24. ADD/CLEAR - When entering

input, use to delete characters.

25. SOURCE - Selects the input

video source for recording. Choices include built-in TV Tuner and AV Inputs,. SCART IN(if support),SVIDEO INPUTS DV IN.

26. DVD/TV - Switches between

Live Recording mode and DVD Recorder mode.

27. MENU - Accesses Menu DVD

Discs.

28. SELECT - Selects options in

menus. Plays a disc, chapter or track with some discs. For other discs, press PLAY.

29. RETURN -Resume playback for

DVD discs and other discs.

30. NEXT/PREVIOUS - Advanced to

the next track or plays previous track on DVD and other disc.

31. PLAY- Playback or Pause the

disc.

32. STOP - Press once to stop

playback and hold the last position in memory. Playback can be resumed where it was left off by pressing PLAY. Press twice to clear the last playback position.

33/34. VOL(+/-) - Use to select

volume +, -.

35. TITLE - Accesses the title screen

on DVD+R/RW discs, displaying a graphical representation of the recordings and providing easy navigation.

36. ANGLE - Selects between

multiple angles with DVD Discs that support this feature.

37. SUBTITLE - Selects available

subtitles on DVD discs.

38. PSCAN -Select the video out

format for progressive scan mode or Interlace TV.

39. MUTE - Temporarily cancels

audio playback.

40. DISC OPER - Play\Recording

Disc\over write Disc \Lock Disc.

numeric values while setting options.

21. STANDBY - Turns the unit on

and sends the unit to Standby mode.

Front Panel

FUNCTIONAL OVERVIEW

11 12

1. STANDBY - Turns the unit on and sends the

unit to standby mode. In standby mode, the unit will use a minute amount of power to enable power-on by the remote control.

2. DISC TRAY - Loads DVD+R/RW, DVD, CD,

SVCD, MP3, JPG and other optical discs.

3. VFD DISPLAY - The front Display shows

information about the unit's operation, such as current chapter and elapsed time during playback and disc tray status.

4. REMOTE RECEIVERS

5. OPEN/CLOSE - Press to open or close the

disc tray.

6. PLAY/PAUSE - Begins playback of a disc,

chapter or track. Press again during playback to pause, and again to resume playback.

7. STOP - Press once to stop playback of a disc and save the location of the stop point. The disc can be played back from the stop point by pressing PLAY. To erase the stop point and reset the play location to the

beginning of the disc, press STOP a second time.

8. RECORD - Begins a Live Recording.

8 9 10

9. REC MODE - Selects the recording quality mode HQ, SP, EP, SLP.

10. SOURCE - Selects Input Sources when the

Recorder is in Live Record mode - TV Tuner, VIDEO IN 1 / 2, S-VIDEO IN 1 / 2, DV, SCART (if support).

And switch DVD Recorder mode to live recorder mode.

11.DV IN (1394FIRE WARE)-The i-link(1394 fire

ware)DV input Jack connect the DV or Digtial camcorder for recording.To select this input,use the SOURCE button and choose DV IN.

12.S-VIDEO INPUT - S-VIDEO input for recording.

To select this input, use the SOURCE button and choose FRONT S-VIDEO.

13.STEREO AUDIO INPUTS - Use with S-VIDEO

IN or VIDEO IN for recording.

14.VIDEO INPUT - Composite Video input for recording. To select this input, use the SOURCE button and choose FRONT CVBS.

+ 30 hidden pages

Wintal DVDR-X5 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual