Wintal 42LED12FHD User Manual

1

CONTENTS

1 PREFACE ····································································································· 2

2 SAFETY PRECAUTIONS ················································································ 2

3 FRONT , BACK AND REAR CONNECTIONS OF LED TV ····································· 3

4 CONFIGURATION OF THE LED TV ································································· 4

4.1 CHANNEL SETTING ················································································ 5

4.2 PICTURE SETTING ················································································· 4

4.3 SOUND SETTING ··················································································· 4

4.4 TIME SETTING ······················································································ 5

4.5 OPTION SETTING ··················································································· 5

4.6 LOCK SETTING ······················································································ 5

USB INSTRUCTIONS ···················································································· 10

5 REMOTE CONTROL INSTRUCTIONS ··························································· 12

6 REMOTE CONTROLS SETUP ······································································· 14

6.1 BATTERY USAGE CAUTION ·································································· 14

7 ACCESSORIES ··························································································· 14

8 TROUBLE SHOOTING AND ADVICE ····························································· 14

9 SPECIFICATIONS ······················································································· 15

2

1 PREFACE

Thank you for buying this LED TV! Please read this manual thoroughly before operating the monitor.
Make sure the monitor was not damaged in transit. Should the monitor is damaged, do not install it and
contact your dealer. Check that you have all the accessories according to the model.

2 SAFETY PRECAUTIONS

Put the monitor on a stable surface.

Do not use the monitor with others fixations than those provided or suggested by the

manufacturer.

Do not place any material on the monitor.

If you have a wall mount, check that it is steady.

Do not block or cover the ventilation openings on the monitor

Power source

The monitor must be plugged with a tension source of 100-240V and 50/60 Hz.

Connection cables

Power cord and cables must be properly routed and protected to prevent people from stepping
on them and causing the monitor to fall.

Heating sources and humidity

Keep the monitor dry and away from humidity.

Keep the monitor away from heat sources.

Cleaning and maintenance

Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, does not use spare parts other than those suggested by the
manufacturer. Using inadequate spare parts can lead to electric shocks short-circuits fire or
other incidents.

Departure in holidays

Unplug the TV during lighting storms or when unused for long periods of time.

3

3 Front , Back And Rear Connections of LED TV

Front View

Back View

（The backview is only for your reference;details according to the model）

Rear Connection

AUDIO OUT(R/L): Composite audio output
YPBPR:Component input(AUDIO:R/L)
AV IN(VIDEO/R/L):Composite video input
HDMI1/2/3：HDMI1/2/3 input
PC:VGA PC video input
PC AUDIO:PC audio input
RF:RF antenna connector
USB:USB Host port
OPTICAL:OPTICAL digital audio output(SPDIF) for connection to home theatre audio amplifier
EARPHONE:Headphone audio output

1. TV /AV select

2. Menu key

3. Channel up/down

4. Volume up/down

5. STANDBY

6. Remote control sensor

4

4 CONFIGURATION OF THE LED TV

4.1 CHANNEL SETTING

Press <MENU> key, then press ►key,
a) Press

▼ then enter CHANNEL Setting Menu. Press ▲ or ▼ key and enter Auto Tuning, DVB-T

Manual Tuning,ATV Manual Tuning,Programme Edit,Signal Information,LCN Sorting,Software
Update(USB).

b) Press◄or►key to access and adjust Auto Tuning, DVB-T Manual Tuning,ATV Manual

Tuning,Programme Edit,Signal Information,LCN Sorting,Software Update(USB).

4.2 PICTURE SETTING

Press <MENU> Key, then enter the Menu.
a) Press

▼ and enter Picture Setting Menu. Press ▲ or ▼ key and enter Picture

Mode,Contrast,Brightness,Colour, Sharpness,Tint, Colour Temp,Aspect Ratio,Noise Reduction.

b) Press

◄ or ► key to access and adjust Picture Mode,Contrast,Brightness,Colour, Sharpness,Tint,

Colour Temp,Aspect Ratio,Noise Reduction.

4.3 SOUND SETTING

Press < MENU >, then press

► key

a) Press

▼, then enter Sound Setting Menu. Press ▲ or ▼ key to enter Sound

Mode,Treble,Bass,Balance,Auto Volume,Surround Sound,SPDIF Mode,Audio Delay.

b) Press

◄ or ► Key to access and adjust Sound Mode,Treble,Bass,Balance,Auto Volume,Surround

Sound,SPDIF Mode,Audio Delay.

5

4.4 TIME SETTING

Press <MENU> key, then press

► key

a) Press

▼, then enter TIME Setting Menu. Press ▲ or ▼ key and enter Clock,Off Time,On Time,

Sleep Timer, Auto Sleep,Time Zone,Daylight Saving.

b) Press ◄ or ► key to access and adjust Clock,Off Time,On Time, Sleep Timer, Auto Sleep,Time

Zone,Daylight Saving.

4.5 OPTION SETTING

Press <MENU> key, then press►

key.

a)Press

▼ then enter OPTION Setting Menu. Press ▲ or ▼ key and enter OSD Language,Audio

Languages,Subtitle Language,Hearing Impaired,PVR File System,Reset,Blue Screen,OSD Timer.

b) Press◄or►key to access and adjust OSD Language,Audio Languages,Subtitle Language,Hearing

Impaired,PVR File System,Reset,Blue Screen,OSD Timer.

4.6 LOCK SETTING

Press <MENU> key, then press

► key

a) Press

▼, then enter LOCK Setting Menu. Press ▲ or ▼ key and enter Lock System,Hotel Mode.

b) Press ◄ or ► key to access and adjust Lock System,Hotel Mode.

Note：The initial password is 0000, universal password is 4711

6

c) Press ▼ key to access the Hotel Mode,Press the password 0000,then enter into the HOTEL.

HOTEL MODE INSTRUCTIONS:

HOTEL MODE

1.Default OFF the following set all invalid;

2.Default ON Hotel Mode work

SET PASSWORD

Set the Password.

PICTURE MODE

Set the default boot Picture mode

SOUND MODE

Set the default boot Sound mode

KEY LOCK

1. Default status is OFF

2. Default ON,the Keypad is locked

SEARCH LOCK

1. Default status is OFF

2. Default ON, Can't searching channels

SOURCE SETTING

1. Default status is OFF

2. The user cannot select the source when it sets ON.

DEFAULT SOURCE SET OFF/DTV/ATV/PC…etc.

1. Default status is OFF

2. If this is set OFF, then it will automatically be in the last-step status when the TV is turned on.

3. If this is set to any other status like DTV/ATV or PC expect OFF, then it will automatically be in the
Source selection when the TV is turned on.

DEFAULT PROG

Turning the Default Source into DTV/ATV at first place, then you can find the acquiescent starting channel
being set as 1,2,3……etc.

MAX VOLUME SET 0/…/100 set a maximum volume value.

The user can adjust the volume within the limited preset value after being set the maximum

DEFAULT VOLUME

Set the default boot volume

CLEAR LOCK

Clear all the settings above.

7

PVR Function list

Item

Record directly

1.Press●button to record the current program.

Press to stop recording.

2.File maximum size 3.9G byte , if surpass the capacity
it will divide the file to deposit.

Timer record

1.Use EPG to carry on the appointment record.

2.Support periodicity record /everyday record
/disposable record.

3.When the time appointment is conflict ,it will
produce a warning message.

Disk manager

1.Can delete a single file .

2.Provide Disk formatting functions.

Playback

1.You can play back the recorded program in Media/USB
Channel

Basic instructions

1.The storage location of out file
Press ▼ / ▲ button to select Option in the main menu.
Press ▼ / ▲ button to select PVR File System, then press OK button to enter.
Press ▼ / ▲ button to select Select Disk , then press OK button to enter .

Use the external device(USB/CARD) to do appointment record.
You can switch partition in this interface.

2 . Check the USB speed
Press ▼ / ▲ button to select Check PVR File System ,
then press OK button to enter .Then it will check the USB speed.

8

Recording methods

Mode1: Shortcut key

1.Press ●button to record the current program.
Press to stop recording.

2.Press STOP button to stop recording ,the it will return to normal broadcast television.

3.When the storage space of Disk is shortage. It will produce a warning message, then
it stops recording automatically and return to normal broadcast television.

4.Press index button to see the information of the recorded list .
Press INFO button to see the detail of the program.

NOTE: You can see detail about the DATE/TIME/DURATION/PROGRAM NAME/CHANNEL
NAME/DESCRIPTION

Mode2:Time shift

1.Press► button to start Timeshift.

This operation can make the frame still ,and record program at the backstage.

9

Mode3:Timer

1.You can also press EPG button to set record.
Press the red button to start recording.

1. red background：means this time is the record time.

2. green background ：means reminder time list.

3. yellow background ：means the EPG's detailed information

2. blue background ：means this time is reminder time

10

USB INSTRCUTIONS

Note:Before operating mutilmedia menu,Plug in USB device,then press SOURCE button to set the Input
Source to mutilmedia.
Press

▲ or ▼button to select mutilmedia in the Source menu, then press OK button to enter.

Press ◄ / ► button to select the option you want to adjust in the main mutilmedia menu,then press OK
button to enter.

Photo Menu

Press ◄ / ► button to select PHOTO in the main menu, then press OK button to enter.
Press menu button to return back to the previous menu and exit menu to quit.

Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter.
Press ◄ / ► button to select return option to back to the previous menu.

Press ◄ / ► button to select the file you want to watch in the file selecting menu, then press media button
to display picture.When highlighting the option you select,the file information will appear on the right and
picture will be previewed in the center.

Press ◄ / ► button to select the file folder you want to search in the file selecting menu, then press red or
OK button on your remote control to enter sub-menu.
Press ◄ / ► button to select the file you want to delete in the file selecting menu, then press red button on
your remote control and press OK button to delete files.

NOTE:The operation for all other kinds of media file is almost same

11

USB MULTIMEDIA PLAYBACK FORMAT

Media File Extension Code

VIDEO AUDIO

Movie

.avi MPEG-4 MP3,WMA,AAC

.mpg MPEG-1,MPEG-2

.dat MPEG-1

.mov/. mkv H.264

Music .mp3 --- MP3

.wma --- WMA

.m4a/.aac --- AAC

Photo

.jpg/.jpeg

Progressive JPEG

Baseline JPEG

.bmp BMP

.png

Non-Interlaced

Interlaced

12

5 REMOTE CONTROL INSTRUCTIONS

13

TV Functions

1.POWER: Press the TV on and standby.

2.MUTE: Press to mutes the sound.

3.NUMBER: Numeric buttons for direct channel access.

4.TV/RADIO: Press to change between TV and Radio

5.

: go back to the last viewed channel

6.SLEEP: Press to select a preset time interval for automatic shut off.

7.ASPECT:Aspect ratio.

8.AUDIO/LANG.:

Stereo, Mono, Dual audio

9.P.MODE: Press to select the picture mode.

10.S.MODE: Press to select the sound mode

11. ◄►▲▼, OK:

Use to select on-screen menu items and change menu values

12.EXIT: Exit the menu

13.MENU: Press to display the OSD menu.

14. VOL “+” “-”: Press to increase or decrease the volume.

15.CHANNEL “+” “-”: Press to change the TV channels.

16.SOURCE: Press to display the input source menu.

17.CH.LIST: channel list

18.FAV: Press to display the favorite channel list which you stored before.
19/20/21/22. Colour buttons: Channel Edit function

26.EPG: Electronic Program Guide(EPG) display.

33.INDEX: Tune out the Recordrd List menu

34.SUBTITLE: Display/OFF the subtitle on screen

38.INFO: Show Current Information

PVR Function

23.●：

Press this button to directly record the DTV into USB disk(In USB Mode or PVR

Setting to see the PVR file)

25.T.SHIFT:

Timeshitf function(Opearted by ►,,,,, keys)

TEXT functions

19/20/21/22. Colour buttons: Teletext function

31.REVEAL: Teletext re ve al

32.HOLD: Teletext hold.

33.INDEX: Teletext index

34.SUBTITLE: Teletext subtitle

35.TEXT: Teletext function

36.SIZE: Teletext size

37.SUBPAGE: Teletext subpage

USB Functions

19/20/21/22. Colour buttons:Media function

24. :STOP/Exit PVR or

Timeshift

25.►:PLAY/PAUSE

27.: Previous key

28.: Next key

29.: Fast return key

30.:Fast forward key

14

6 REMOTE CONTROLS SETUP

a: Open the cover
b: AAA size batteries, When inserting the batteries, make sure correct polarities as per “+”and “-”marks on

the batteries and within the battery compartment

c: Replace the battery cover

6.1 BATTERY USAGE CAUTION:

To prevent battery from leakage which may result in bodily injury or damage to the remote, please do as

follows: 1. Install all batteries correctly, and as marked on the remote control.

2. Do not mix batteries :(OLD and NEW or CAR BON and ALKALINE, etc.).

3. Remove batteries when the remote is not used for a long time.

7 ACCESSORIES

1. One Remote Control
2 .Two Batteries 1.5V

3. One User Manual

8 TROUBLE SHOOTING AND ADVICE

Before calling our SAS centre, please check if you can solve the troubleshooting by yourself.

Troubleshooting Control

No signal

Please check that all cables and cordons are correctly
plugged in.

No color shades Adjust the contrast, the colour and the brightness

Stain show on the
screen.

May be result from a lighting signal from car, motor, neon
light and other electrical devices or appliances.

Double or multiple
display image

May be the result of an electrical wave disturb from other
TV, Computer and Game machine or Radio

Snow on the screen The cables of the antenna are not correctly plugged in.

The remote control
does not work

Please check the batteries order and alignment.
Check that the IR of the remote control is not hidden by
something.

"Zip" made noise on
TV cover

Even if the display image is correct, the noise may come
from an unsteady fixation of the panel.

No sound

Make sure that you have not press the MUTE button of the
panel or of the remote control.

15

9 SPECIFICATIONS

Screen Size 42Inch

Display Type LED TV

Aspect Ratio 16:9

Power Source

100-240V~50/60HZ

≤120W

TV System PAL / SECAM

Video Input Format PAL / NTSC/SECAM

Antenna Input Standard antenna socket 75 Ω

Audio Output L / R 10W*2

Input

AV Video:1.0Vp-p, 75Ω; Audio20kΩ; RCA

PC Standard VESA mode

HDMI MAX 1080P

YPbPr 1.0Vp-p 75Ω;RCA,MAX 1080P

Output Audio L/R

200mVmrs (max3.0vp-p) 20KΩ
RCA

Net Weight 15±1Kg

Net Dimensions With Stand(L*W*H) 1005*230*672mm

Net Dimensions Without Stand(L*W*H) 1005*44*613mm

The manual is only for your reference; any changes to the design and

specification will not be advised.