Wintal 32LDVD05 User Manual

Model: 32LDVD05

32”

16:9 Digital LCD Television with DVD Player

Operating Manual

http://wintal.com.au

Manual 32LDVD05.indd aManual 32LDVD05.indd a 27/07/2005 4:37:29 PM27/07/2005 4:37:29 PM

Manual 32LDVD05.indd bManual 32LDVD05.indd b 27/07/2005 4:37:38 PM27/07/2005 4:37:38 PM

TABLE OF CONTENTS

1. PreFace 1

2. Safety Precautions 1

3. Front, Back Connections 2

4. TV Installation 4

4.1 Connecting Antennas 4

4.2 AV Video Input 4

4.3 S-Video Input 4

4.4 YCbCr Input 5

4.5 YPbPr Input 5

4.6 PC (VGA) Connection 5

4.7 AV Video Output 5

4.8 DVI Connection 6

5. Setting Up Your LCD 6

5.1 Picture Setting 6

5.2 Audio Setting 6

5.3 Source Setting 7

5.4 TV Channel Search 7

6. TV / DVD Combo Remote Control 8

6.1 Remote control instructions in TV mode 8

6.2 Remote Control Instructions in DVD Mode 9

7. Remote Control Setup 9

7.1 Battery Usage Caution 9

8. Accessories 10

9. DVD Operation Instructions 10

9.1 DVD Console Operation 10

9.2 DVD System Setup Menu 11

9.3 DVD Language Setup 11

9.4 DVD Display Setup 11

9.5 DVD Audio Setup 12

9.6 DVD Lock Setup 13

9.7 “Others” Settings 15

9.8 Data Disc and Audio CD Playback 16

9.9 BOOKMARK 17

10. Troubleshooting 18

11. Specifi cations 19

Manual 32LDVD05.indd cManual 32LDVD05.indd c 27/07/2005 4:37:39 PM27/07/2005 4:37:39 PM

1. PREFACE

Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.

2. SAFETY PRECAUTIONS

Place the Monitor on a stable surface.

Do not use the monitor with other fi xations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.

Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.

Power source

 e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.

Connection cable

Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.

Heating sources and humidity

Keep the monitor dry and away from humidity.

Keep the monitor away from heat sources

Cleaning and maintenance

Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fi re or other incidents.

Lightning/ Holidays

Unplug the LCD during lightning storms or when not used for long periods of time.

1 | Wintal LCD

Manual 32LDVD05.indd Sec1:1Manual 32LDVD05.indd Sec1:1 27/07/2005 4:37:39 PM27/07/2005 4:37:39 PM

3. FRONT, BACK CONNECTIONS

Front View and Controls

Back View

Back Connections

DVI Input Y Pb PrPC Audio

PC

R/L Input

VGA Input Audio R/L

YCbCr AV Out

AV

1

AV

2

Audio R/L S-Video

CVBS Video

Audio R/L Out

CVBS Video Out

RF In

Wintal LCD | 2

Manual 32LDVD05.indd Sec1:2Manual 32LDVD05.indd Sec1:2 27/07/2005 4:37:39 PM27/07/2005 4:37:39 PM

Side View

DVD Player Controls

1.  : PLAY

2.  : PAUSE

3.  : STOP

4.  : NEXT TRACK

5.

6. : EJECT

 : PREVIOUS TRACK

3 | Wintal LCD

Manual 32LDVD05.indd Sec1:3Manual 32LDVD05.indd Sec1:3 27/07/2005 4:37:39 PM27/07/2005 4:37:39 PM

4. TV INSTALLATION

4.1 Connecting Antennas

To ensure good picture and sound, TV antenna system needs to be installed.  e
antenna system as shown can be sourced from TV equipment shops, which will
provide service for correct installation and connection. After installation, insertv the
75Ω antenna plug into the antenna jack as shown.

4.2 AV Video Input

4.3 S-Video Input

Wintal LCD | 4

Manual 32LDVD05.indd Sec1:4Manual 32LDVD05.indd Sec1:4 27/07/2005 4:37:39 PM27/07/2005 4:37:39 PM

4.4 YCbCr Input

4.5 YPbPr Input

4.6 PC (VGA) Connection

4.7 AV Video Output

5 | Wintal LCD

Manual 32LDVD05.indd Sec1:5Manual 32LDVD05.indd Sec1:5 27/07/2005 4:37:40 PM27/07/2005 4:37:40 PM

4.8 DVI Connection

5. SETTING UP YOUR LCD

5.1 Picture Setting

Press <SYS MENU> KEY until the screen displays as below.

1.
Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select

2.
Mode, Bright, Contrast, Colour and Sharpness for required adjusting option.
Press ◄ or ► key to adjust the setting selected.

3.

5.2 Audio Setting

Press <SYS MENU> KEY until the screen displays as below.

1.
Press ► key enter into audio menu press ▲ or ▼ key to select Mode, Volume,

2.
Treble, Bass, Balance and Surround for required adjusting option.
Press ◄ or ► key to adjust the setting selected.

3.

Wintal LCD | 6

Manual 32LDVD05.indd Sec1:6Manual 32LDVD05.indd Sec1:6 27/07/2005 4:37:40 PM27/07/2005 4:37:40 PM

5.3 Source Setting

Press <SYS MENU> key until the screen displays as below.

1.

Press ► key to access Input Group –Blue Screen –Language—Reset menu
setting.

2.

Press ▲ or ▼ key to select exact menu setting.

3.

Select <Input Group> menu, press ► key to access TV-SCART-DVD-PC for
selecting input source.

* In <SCART> menu, choose terminal-select in sub-menu SCART CVBS
or SCART RGB for input source.

4.

Press ▲ or ▼ key to access OSD <Language>, select suitable language.
Press ▲ or ▼ key to access <Reset >, it will come back to original factory
setting.

* If you have setup problems, use <Reset> menu to help you back to factory
setting.

5.4 TV Channel Search

Press <SYS MENU> key until the screen displays as below.

Press ► key to access Auto Tune – Manu Tune – Fine Tune – Sort – Add/skip–

1.
Color System – Sound System menu setting.
Press ▲ or ▼ key to select exact menu setting.

2.
Press ▲ or ▼ key to select <Manu Tune> or <Fine Tune > menu to adjust the

3.
TV.
Press ▲ or ▼ key to access<Sort> to exchange channel.

4.
Press ▲ or ▼ key to access <add/skip> to add or skip the channel.

5.

* Before tuning in the TV, choose the correct colour system and sound
system for your country. After that, choose the auto tune to start searching
the TV channel.

7 | Wintal LCD

Manual 32LDVD05.indd Sec1:7Manual 32LDVD05.indd Sec1:7 27/07/2005 4:37:40 PM27/07/2005 4:37:40 PM

6. TV / DVD COMBO REMOTE CONTROL

e

m

q

3

1

5

7

9

11

4

W

E

SLEEP MUTE MODE

R

O

P

2

EJECT

a

b

c

6

8

-/--

PICTURE

2 31

PAUS E

5 64

STOP

8

97

BACK

SYS MENU

0

CH+

AUDIO

10

ENTER

VOL - VOL +

12

13

CH-

SETUPRESUME MENU DISPLAY

d

SUBTITLESEARCH TITLE ZOOM

h

PBCCLEAN BOOKMARK

LANGUAGE

l

REPANGLE SLOW

A-B

p

g

f

k

ji

o

n

s

r

t

v

wu

32LDVD05

6.1 Remote control instructions in TV mode

1 Power ON/OFF
2 TV/AV/DVD/PC mode
3 Sleep timer 30-60-90-120 off
4 Mute
5 Number keys
6 System setting menu key
7 Access to several numbers program
8 Back to the previous screen
9 Picture mode
10 Audio mode
11 Decrease volume control key
12 Channel control and menu item execute key
13 Increase volume control key

Wintal LCD | 8

Manual 32LDVD05.indd Sec1:8Manual 32LDVD05.indd Sec1:8 27/07/2005 4:37:40 PM27/07/2005 4:37:40 PM

6.2 Remote Control Instructions in DVD Mode

a To eject the disc
b Pause
c To stop disc
e Access to menu in DVD mode
f Access to settings in DVD mode
d Resume playback
g Display control menu
i Locating a title
j Access to subtitles
h Search disc chapter and time
k Zoom of the picture
m Set bookmark
n Right/left sound track selection while playing VCD
l Clear all bookmarks
o Selecting language
q Slow key
r Repeat to the previous chapter
p Select movie vision angle
s Replaying point A to point B when selected
u Fast forward key
t Fast backward key
v Jump to next track
w Jump to previous track

7. REMOTE CONTROL SETUP

Open the cover

a.

Insert the supplied “AA” size batteries

b.

When inserting the batteries, make sure correct polarities as per the “+” and “-”
marks on the batteries are correct
Replace the battery cover

c.

7.1 Battery Usage Caution

To prevent battery leakage which may result in injury or damage to the remote:

Install all batteries correctly, and as marked on the remote control

1.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.)

2.
Remove batteries when the remote is not used for a long time

3.

9 | Wintal LCD

Manual 32LDVD05.indd Sec1:9Manual 32LDVD05.indd Sec1:9 27/07/2005 4:37:41 PM27/07/2005 4:37:41 PM

8. ACCESSORIES

Included with your Wintal LCD are the following accessories:

AC/DC Power Adapter

1.
One Remote Control

2.
2x 1.5V “AA” batteries

3.
One User Manual

4.
AV Cable

5.

9. DVD OPERATION INSTRUCTIONS

9.1 DVD Console Operation

Press DISPLAY to bring up the Console Menu.

1.
 e Console function is only available in DVD/DVD Audio/ DVD-VR/ VCD

2.
discs, and the display result may diff er among these disc types.

DVD-VR Console

Wintal LCD | 10

Manual 32LDVD05.indd Sec1:10Manual 32LDVD05.indd Sec1:10 27/07/2005 4:37:41 PM27/07/2005 4:37:41 PM

9.2 DVD System Setup Menu

Press < SETUP > key until the screen displays as photo 1.

1.
Press ◄ key or ► key to select LANGUAGE -- DISPLAY - AUDIO -

2.
LOCK - OTHERS menu setting.

9.3 DVD Language Setup

Press < SETUP > key until the screen displays as photo 2

1.
Press ▼ key to selecting Menu Language –Disc Audio –Disc Subtitle- Disc

2.
Menu setting.
Press ► key to adjust.

3.
Press < Enter > to confi rm the selection.

4.

Photo 2

9.4 DVD Display Setup

Press < SETUP > key until the screen displays as photo 3

1.
Press ▼ key to selecting TV Aspect –Display mode -TV Output Menu setting.

2.
Press ► key to adjust.

3.
Press < Enter > to confi rm the selection.

4.

11 | Wintal LCD

Manual 32LDVD05.indd Sec1:11Manual 32LDVD05.indd Sec1:11 27/07/2005 4:37:41 PM27/07/2005 4:37:41 PM

Photo 3

TV Aspect: Depending on the type of television you have, the image adjustment
off ers 2 options for your setting: 4:3 and 16:9.  is item is used to display image
data in the wide-screen fi lm on the normal TV set.  e option 16:9 is used when
the DVD player is connected to wide screen TV in Full Mode, and the screen will
display pictures in full size.
Display Mode item can only be modifi ed when the TV Display mode is set to 4:3.
Two options are provided: Letterbox and Panscan.
* Letterbox:  is image option will display the panoramic frame movie in the smaller
portion of the screen. And the movie might appear with black bars at the top and
bottom of the screen.
* Panscan:  is image option refers to pictures where the left and right edges of the
picture are cut off so it fi lls the whole screen. It is selected for the normal TV set
display.  is mode is selected when the picture is displayed in panoramic view and
complete scan format.
TV Output : Auto-PAL-NTSC

9.5 DVD Audio Setup

Press < SETUP > key until the screen displays as photo 4

1.
Press ▼ key to selecting Dolby Digital – DTS-Sample Freq.-Digital Output

2.
– DRC Menu setting.
Press ► key to adjust.

3.
Press < Enter > to confi rm the selection.

4.

Photo 4

Wintal LCD | 12

Manual 32LDVD05.indd Sec1:12Manual 32LDVD05.indd Sec1:12 27/07/2005 4:37:41 PM27/07/2005 4:37:41 PM

1. Dolby Digital indicates the output mode of the Dolby Digital.

Two options are provided: Bitstream and PCM

2. DTS indicates the output mode of the Digital Cinema.

Two options are provided: Bitstream and PCM.

BITSTREAM: Select this option when the unit is connected to an amplifi er

a.

with a built–in DTS decoder, Dolby Digital decoder and MPEG decoder, or
other audio equipment with digital audio output terminals.

PCM: Select this option when the unit is connected to the dual stereo digital

b.

audio equipment. When the DVD disc being played is recorded with the Dolby
Digital, MPEG1/ MPEG2 recording systems, the DVD player selects PCM as
the audio output.

Sample Freq. item off ers 2 options. If the connected receiver or amplifi er is

I.

incapable of processing digital input with sampling frequency of 96KHz, it will
select 48KHz as the sampling frequency to compress the signal to a standard
signal. After the 48KHz frequency is selected, the unit will automatically
convert the 96KHz signal into the 48KHz signal, and then your system will be
able to execute the decoding on the signals. On the other hand, if the receiver is
capable of outputting digital signals with a sampling frequency of 96KHz, it will
select 96KHz for the signal to be output as it is.
After 96KHz frequency is selected, the unit will be able to process all signals
without any further operations required.

Dynamic Range Compression (DRC) Provides 2 options: ON and OFF. When

II.

the option is set as ON, the dynamic range is compressed by reducing loud
sounds and increasing soft sounds, making it easier to listen at low volume but
still enjoy clear dialogues.

Note:
Audio-digital out function is only fi t for machines that have the digital out option.

9.6 DVD Lock Setup

Press < SETUP > key until the screen displays as photo 4

a.

Press ▼ key to selecting Rating—Password—Country Code Menu setting.

b.

Press ► key to adjust.

c.

Press < Enter > to confi rm the selection.

d.

13 | Wintal LCD

Manual 32LDVD05.indd Sec1:13Manual 32LDVD05.indd Sec1:13 27/07/2005 4:37:41 PM27/07/2005 4:37:41 PM

Rating item is used to set the rating level.

 Before you enter into the item, the system will request you to input the password
fi rst. After the password is entered correctly, the parental control rating level can be
changed.

 If you didn’t set any password of Parental Control, the system will request you to
input a new password.

 If you make a mistake before pressing ENTER, press CLEAR and enter your
4-digit password again.

 After the new password is entered successfully, press ▲/▼ to change the parental
control rating level. Including the Unlock level, there are a total of 9 levels in the
parental control rating levels. See the Parental Control section for details.

 e parental control function is only valid after the disc eject operation is performed
following the parental lock setting.

Password item is used to set the new password or change the old password. Before
you enter into the item, the system will request you to input the old pass word fi rst.
 e new password will be accepted only when the old password is input correctly.

 e Country code item is used to set the national code. It is a prerequisite that the
setting of the parental control level is only valid when the country code of the unit
is matched with that of the disc.  e country code item provides two alphabetical
letters for changes.

 Before user can enter into the country code item, the system will request you to
input the password fi rst.  e country code can be changed only after the password is
input successfully.

Wintal LCD | 14

Manual 32LDVD05.indd Sec1:14Manual 32LDVD05.indd Sec1:14 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM

9.7 “Others” Settings

Press < SETUP > key until the screen displays as photo 5.

a.

Press ▼ key to selecting PBC - Auto Play – B.L.E. –Load Default – Screen

b.

Saver – Last player Menu setting.
Press ► key to adjust.

c.

Press < Enter > to confi rm the selection.

d.

PHOTO 5

PBC item provides 2 options: ON and OFF. Please refer to the section VCD

1.

/ SVCD PBC Menu for the respective descriptions of ON and OFF option of
the PBC function.

Auto Play item provides 2 options: ON and OFF. When the option is set as

2.
ON, the auto play function will be activated.

  e DVD player will search for the DVD disc track that has the longest playback
time, and proceed to play the track.

 For the VCD and CD discs, the unit will automatically play the VCD/CD disc
from the beginning after the disc is recognized.

15 | Wintal LCD

Manual 32LDVD05.indd Sec1:15Manual 32LDVD05.indd Sec1:15 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM

9.8 Data Disc and Audio CD Playback

When you insert a disc that contains WMA, MPEG and JPG data or an audio CD
into the unit, you will see the media play listing pictures as illustrated on the left.

Press TITLE to switch among the 3 option pages of Music, Photo and Movie.

1.

 e Music page is divided into 3 areas:

2.
Playback List, Program List and Edit Area in the middle.

 You can press PLAY or ENTER on the highlighted folder in the playback
list to view the folder contents, or play the corresponding audio fi les in the
playback list or program list.
 You can use the ADD, ADD ALL, DELETE and DELETE ALL options
provided in the middle edit area to proceed with the programming that will get
into the program list.
 To remove a fi le, simply move the highlight to the corresponding fi le under

the program list, and press CLEAR.

 e Photo page is divided into 3 areas:

3.
Playback List, Preview Window and Edit Area in the middle.

 You can press PLAY or ENTER on the highlighted folder in the playback

4.
list to view the folder contents.
 When the highlighted folder you select is a picture fi le, you will see a
minimized version of the picture in the preview window on the right side of the
Photo page.
 After you press ENTER on Slide Show in the middle edit area, you will see
all the pictures displayed in order.
 After you press ENTER on Mix in the middle edit area, all the pictures
will be displayed in order, and the song tracks will be accompanied as the
background music.
  e SPEED in the edit area is used to adjust the time spent during the

picture transition.

In the Movie page, you can press PLAY or ENTER on the highlighted folder

5.
in the playback list to view the folder contents or play the corresponding fi le.

! Caution:

 e playback interface and operations of the audio CD disc is very similar to that of Music.
Please refer to the related descriptions in MUSIC for the operations of the audio CD.
Notes : TV menu and DVD (Data Disc) menu cannot use in the same time.

Wintal LCD | 16

Manual 32LDVD05.indd Sec1:16Manual 32LDVD05.indd Sec1:16 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM

9.9 BOOKMARK

1.

When the disc position that you want to set a bookmark is being played, press
BOOKMARK. On the bookmark menu, you will see the following picture. It
indicates a bookmark has been set at this specifi ed position.

2.

If you want to recall of the bookmark that you just set, press SEARCH and
K Up/ L Down/ I Left/ J Right to move to the corresponding bookmark
position, and then press Play or ENTER to begin your playback.

Notes:

 Press BOOKMARK again to exit the bookmark menu.
 Up to 9 bookmarks can be marked.
 Press Clear to remove the bookmarks you have set.

17 | Wintal LCD

Manual 32LDVD05.indd Sec1:17Manual 32LDVD05.indd Sec1:17 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM

10. TROUBLESHOOTING

Before calling our Service Centre, please check if you can troubleshoot the problem
by yourself.

Troubleshooting

No signal

No colour shades Adjust the contrast, the colour and the brightness

Double or multiple
display image

Snow on the screen

 e remote control does
not work

No sound

No DVD

DVD player not working
properly

Control

Please check that all cables and connectors are
correctly plugged in.

May be the result of an electrical wave disturbance
from another TV, Computer and Game machine or
Radio

 e cables of the antenna are not correctly plugged
in.

Please check the batteries are inserted correctly.
Check that the IR of the remote control is not
hidden by something.

Make sure that you have not press the MUTE button
of the panel or of the remote control.

Make sure if the TV Set have been switched to
DVD mode

Ensure disc is correctly inserted into the player.
Ensure the disc is not damaged and is of correct
format. Please wait as some discs require longer time
to read.

Manual 32LDVD05.indd Sec1:18Manual 32LDVD05.indd Sec1:18 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM

11. SPECIFICATIONS

Screen Size 32 Inch
Display Type TFT LCD
Resolution(Pixel) 1366 * 768
Brightness 550nits
Color 24 bit ( 16,777,216)
Contrast Ratio 800 : 1
View Angle(H/V ) 170
Aspect Ratio 16:9
Power Source 100-240VAC, 50/60HZ ≤200W
TV System PAL / NTSC
Video Input Format PAL / NTSC
Antenna Input Standard antenna socket 75 Ω
Audio Output L / R 10W*2

VGA Input Format

Video

S-Video
YCbCr 1.0 VP – 75 Ω ; RCA

YPbPr

SCART Video Video 1.0Vp-p75Ω

SCART S-Video
SCART YPbPr 1.0Vp-p75Ω

Input

SCART RGB 1.0Vp-p75Ω

PC

DVI 640*480/60Hz, 800*600/60Hz, 1024*768/60Hz

Audio (Video,
S-Video, YcbCr)

Audio YCbCr R/L (max3.0vp-p) 20KΩ RCA 20mVrms

Audio (AV) R/L (max3.0vp-p) 20KΩ 20mVrms

640*480, 800*600, 1024*768 60Hz
Video 1.0Vp-p 75 Ω; RCA

Y: 1.0Vp-p±3db C: 0.3Vp-p±3db

1.0Vp-p 75Ω; RCA, 480P/60Hz, 576P/50Hz,
720P/I/50Hz, 1080P/50Hz/60Hz

Y:1.0VP-P±3db C:0.3Vp-p±3db

640*480/60Hz, 800*600/60Hz, 1024*768/60Hz

R/L (max3.0vp-p) 20KΩ RCA 20mVrms

Weight

Dimentions (with stand)

24kgs

1000 (L) * 583 (H)* 240 (W) mm

 e manual is only for your reference, any change to the design and specifi cation will

not be advised.

19 | Wintal LCD

Manual 32LDVD05.indd Sec1:19Manual 32LDVD05.indd Sec1:19 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM

Wintal LCD | 20

Manual 32LDVD05.indd Sec1:20Manual 32LDVD05.indd Sec1:20 27/07/2005 4:37:42 PM27/07/2005 4:37:42 PM