Wintal 32L05 User Manual

Model: 32L05

32”

16:9 Digital LCD Television/ PC Monitor

Operating Manual

http://wintal.com.au

Manual 32L05.indd aManual 32L05.indd a 27/07/2005 4:37:56 PM27/07/2005 4:37:56 PM

Manual 32L05.indd bManual 32L05.indd b 27/07/2005 4:38:09 PM27/07/2005 4:38:09 PM

TABLE OF CONTENTS

1. PreFace 1

2. Safety Precautions 1

3. Front, Back Connections 2

4. TV Installation Guide 3

4.1 Connecting Antennas 3

4.2 AV Video Input 3

4.3 S-Video Input 3

4.4 YCbCr Connection 4

4.5 YPbPr Connection 4

4.6 PC (VGA) Connection 4

4.7 AV Video Out Connection 5

4.8 DVI Connection 5

5. Confi guration 6

5.1 Picture Setting 6

5.2 AUDIO SETTING 6

5.3 SOURCE SETTING 7

5.4 TV CHANNEL SEARCH 7

6. Remote Control Instructions 8

7. Remote Control Setup 9

7.1 Battery Usage Caution 9

8. Accessories 9

9. Troubleshooting & Advice 10

10. Specifi cations 11

Manual 32L05.indd cManual 32L05.indd c 27/07/2005 4:38:09 PM27/07/2005 4:38:09 PM

1. PREFACE

Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.

2. SAFETY PRECAUTIONS

Place the Monitor on a stable surface.

Do not use the monitor with other fi xations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.

Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.

Power source

 e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.

Connection cable

Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.

Heating sources and humidity

Keep the monitor dry and away from humidity.

Keep the monitor away from heat sources

Cleaning and maintenance

Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fi re or other incidents.

Lightning/ Holidays

Unplug the LCD during lightning storms or when not used for long periods of time.

1 | Wintal LCD

Manual 32L05.indd Sec1:1Manual 32L05.indd Sec1:1 27/07/2005 4:38:09 PM27/07/2005 4:38:09 PM

3. FRONT, BACK CONNECTIONS

Front View and Controls

Back View

Rear Connections

DVI Input Y Pb PrPC Audio

R/L Input

PC

VGA Input Audio R/L

YCbCr AV Out

AV

1

AV

2

Audio R/L S-Video

CVBS Video

Audio R/L Out

CVBS Video Out

RF In

Wintal LCD | 2

Manual 32L05.indd Sec1:2Manual 32L05.indd Sec1:2 27/07/2005 4:38:09 PM27/07/2005 4:38:09 PM

4. TV INSTALLATION GUIDE

4.1 Connecting Antennas

To ensure good picture and sound, TV antenna system needs to be installed.  e
antenna system as shown can be sourced from TV equipment shops, which will
provide service for correct installation and connection. After installation, insert the
75-ohm antenna plug into the antenna jack as shown.

4.2 AV Video Input

3 | Wintal LCD

4.3 S-Video Input

Manual 32L05.indd Sec1:3Manual 32L05.indd Sec1:3 27/07/2005 4:38:09 PM27/07/2005 4:38:09 PM

4.4 YCbCr Connection

4.5 YPbPr Connection

4.6 PC (VGA) Connection

Wintal LCD | 4

Manual 32L05.indd Sec1:4Manual 32L05.indd Sec1:4 27/07/2005 4:38:10 PM27/07/2005 4:38:10 PM

4.7 AV Video Out Connection

4.8 DVI Connection

5 | Wintal LCD

Manual 32L05.indd Sec1:5Manual 32L05.indd Sec1:5 27/07/2005 4:38:10 PM27/07/2005 4:38:10 PM

5. CONFIGURATION

5.1 Picture Setting

Press <SYS MENU> key until the screen displays as below.

Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select

a.

Mode, Bright, Contrast, Colour and Sharpness for required adjusting option.

Press ◄ or ► key to adjust the setting selected.

5.2 AUDIO SETTING

Press <SYS MENU> key until the screen displays as below.

Press ► key enter into audio menu press ▲ or ▼ key to select Mode, Volume,

a.

Treble, Bass, Balance and Surround for required adjusting option.
Press ◄ or ► key to adjust the setting selected.

b.

Wintal LCD | 6

Manual 32L05.indd Sec1:6Manual 32L05.indd Sec1:6 27/07/2005 4:38:10 PM27/07/2005 4:38:10 PM

5.3 SOURCE SETTING

Press <SYS MENU> key until the screen displays as below.

Press ► key to access Input Group –Blue Screen –Language—Reset menu

a.

setting.
Press ▲ or ▼ key to select exact menu setting.

b.

Select <Input Group> menu, press ► key to access TV-SCART-DVD-PC for

c.

choose input source.

In <SCART> menu, will access to choose terminal-select in sub-menu SCART
CVBS or SCART RGB for input source.

Press ▲ or ▼ key to access OSD <Language>, select your language.

d.

Press ▲ or ▼ key to access the <Reset> function which will reset your LCD
back to default factory settings.

e.

5.4 TV CHANNEL SEARCH

Press <SYS MENU> key until the screen displays as below.

Press ► key to access Auto Tune – Manu Tune – Fine Tune – Sort – Add/skip–

a.

Color System –Sound System menu setting.
Press ▲ or ▼ key to select exact menu setting.

b.

Press ▲ or ▼ key to select <Manu Tune> or <Fine Tune > menu to adjust the

c.

TV.
Press ▲ or ▼ key to access <Sort> to exchange channel.

d.

Press ▲ or ▼ key to access <add/skip> to add or skip the channel.

e.

* Before tuning in the TV, please choose the correct colour system and sound system
for your country. After that, choose the auto tune to start searching.

7 | Wintal LCD

Manual 32L05.indd Sec1:7Manual 32L05.indd Sec1:7 27/07/2005 4:38:10 PM27/07/2005 4:38:10 PM

6. REMOTE CONTROL INSTRUCTIONS

3

1

5

6

9

12

W

E

SLEEP MUTE MODE

R

O

P

2 31

5 64

8

-/--

PICTURE

VOL - VOL +

0

CH+

ENTER

CH-

97

BACK

SYS MENU

4

2

7

8

AUDIO

10

11

13

32L05

1 Power ON/OFF
2 TV/AV/PC Mode
3 Sleep Timer
4 Mute
5 Number keys
6 Access to several numbers program
7 System setting menu key
8 Return to the previous program
9 Picture mode
10 Audio mode
11 Channel control and menu item execute key
12 Decrease volume control key
13 Increase volume control key

Wintal LCD | 8

Manual 32L05.indd Sec1:8Manual 32L05.indd Sec1:8 27/07/2005 4:38:10 PM27/07/2005 4:38:10 PM

7. REMOTE CONTROL SETUP

a.

Open the cover

b.

Insert the supplied “AA” size batteries
When inserting the batteries, make sure correct polarities as per the “+” and “-”
marks on the batteries are correct

c.

Replace the battery cover

7.1 Battery Usage Caution

To prevent battery leakage which may result in injury or damage to the remote:

Install all batteries correctly, and as marked on the remote control

1.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.)

2.
Remove batteries when the remote is not used for a long time

3.

8. ACCESSORIES

Included with your Wintal LCD are the following accessories:

AC/DC Power Adapter

1.
One Remote Control

2.
2x 1.5V “AA” batteries

3.
One User Manual

4.
AV Cable

5.

9 | Wintal LCD

Manual 32L05.indd Sec1:9Manual 32L05.indd Sec1:9 27/07/2005 4:38:11 PM27/07/2005 4:38:11 PM

9. TROUBLESHOOTING & ADVICE

Before calling our Customer Centre, please check if you can the following
suggestions will solve your problem.

Troubleshooting Control

No signal

Please check that all cables and connectors are
correctly plugged in.

Incorrect colour shades Adjust the contrast, the colour and the brightness

Double or multiple

image display

Bad/ Snowy picture

The remote control does

not work

No sound

May be the result of an electrical wave disturbance
from another TV, Computer, Game console, or Radio

The cables of the antenna are not correctly plugged
in.

Please check that the batteries are inserted correctly.
Check that the IR of the remote control is not hidden
by something.

Make sure that you have not pressed the MUTE
button on the front panel or on the remote control.

Wintal LCD | 10

Manual 32L05.indd Sec1:10Manual 32L05.indd Sec1:10 27/07/2005 4:38:11 PM27/07/2005 4:38:11 PM

10. SPECIFICATIONS

Screen Size 32 Inch

Display Type

Resolution(Pixel)

Brightness

Color

Contrast Ratio

View Angle(H/V)

Aspect Ratio

Power Source

TV System

Video Input Fromat

Antenna Input

Audio Output

VGA Input Format

RGB

Input

VIDEO

AV

TFT LCD

1366*768

550nits

24bit (16.7m)

800:1

170

16:9

100-240VAC,50/60HZ. ≤200W

PAL/SECAM

PAL/ NTSC

Standard antenna socket 75Ω

L/R 10W*2

640*480/60Hz, 800*600/60Hz, 1024*768/60Hz

0.7VP-P 75∩

CVBS:1.0VP-P, 75∩; RCA

Video1.0Vp-p, 75∩;Audio20k∩; RCA

YCbCr

YpbPr

DVI

Ouput VIDEO 1

AUDIO L/R

IR remote control

Weight

1.0VP-P75∩; RCA

1.0VP-P75∩; RCA

640*480/60Hz, 800*600/60Hz, 1024*768/60Hz

CVBS:1.0VP-P, 75∩; RCA

200mVrms,20k∩ (max.3.0VP-P); RCA

< 6m

24 kg

Dimensions 1000 (L) x 522 (H) x 110 (W ) mm

 e manual is only for your reference, any change to the design and specifi cation will

not be advise.

11 | Wintal LCD

Manual 32L05.indd Sec1:11Manual 32L05.indd Sec1:11 27/07/2005 4:38:11 PM27/07/2005 4:38:11 PM

Manual 32L05.indd Sec1:12Manual 32L05.indd Sec1:12 27/07/2005 4:38:11 PM27/07/2005 4:38:11 PM