Wintal 27LDV05 User Manual

Model: 27LDVD05

27”

16:9 Digital LCD Television with DVD Player

Operating Manual

http://wintal.com.au

Manual 27LDVD05.indd aManual 27LDVD05.indd a 12/07/2005 11:42:25 AM12/07/2005 11:42:25 AM

Manual 27LDVD05.indd bManual 27LDVD05.indd b 12/07/2005 11:42:38 AM12/07/2005 11:42:38 AM

TABLE OF CONTENTS

1. PreFace 1

2. Safety Precautions 1

3. Front, Back Connections 2

4. TV Installation 4

4.1 Connecting Antennas 4

4.2 AV Video Input 4

4.3 S-Video Input 4

4.4 YCbCr Input 5

4.5 YPbPr Input 5

4.6 PC (VGA) Connection 5

4.7 AV Video Output 5

4.8 DVI Connection 6

5. Setting Up Your LCD 6

5.1 Picture Setting 6

5.2 Audio Setting 6

5.3 Source Setting 7

5.4 TV Channel Search 7

6. TV / DVD Combo Remote Control 8

6.1 Remote control instructions in TV mode 8

6.2 Remote Control Instructions in DVD Mode 9

7. Remote Control Setup 9

7.1 Battery Usage Caution 9

8. Accessories 10

9. DVD Operation Instructions 10

9.1 DVD Console Operation 10

9.2 DVD System Setup Menu 11

9.3 DVD Language Setup 11

9.4 DVD Display Setup 11

9.5 DVD Audio Setup 12

9.6 DVD Lock Setup 13

9.7 “Others” Settings 15

10. Troubleshooting 16

11. Specifi cations 17

Manual 27LDVD05.indd cManual 27LDVD05.indd c 12/07/2005 11:42:38 AM12/07/2005 11:42:38 AM

1. PREFACE

Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.

2. SAFETY PRECAUTIONS

Place the Monitor on a stable surface.

Do not use the monitor with other fi xations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.

Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.

Power source

 e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.

Connection cable

Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.

Heating sources and humidity

Keep the monitor dry and away from humidity.

Keep the monitor away from heat sources

Cleaning and maintenance

Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.

In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fi re or other incidents.

Lightning/ Holidays

Unplug the LCD during lightning storms or when not used for long periods of time.

1 | Wintal LCD

Manual 27LDVD05.indd Sec1:1Manual 27LDVD05.indd Sec1:1 12/07/2005 11:42:38 AM12/07/2005 11:42:38 AM

3. FRONT, BACK CONNECTIONS

Front View and Controls

Back View

Back Connections

DVI Input Y Pb PrPC Audio

PC

R/L Input

VGA Input Audio R/L

YCbCr AV Out

AV

1

AV

2

Audio R/L S-Video

CVBS Video

Audio R/L Out

CVBS Video Out

RF In

Wintal LCD | 2

Manual 27LDVD05.indd Sec1:2Manual 27LDVD05.indd Sec1:2 12/07/2005 11:42:38 AM12/07/2005 11:42:38 AM

Side View

DVD Player Controls

1.  : PLAY

2.  : PAUSE

3.  : STOP

4.  : NEXT TRACK

5.

6. : EJECT

 : PREVIOUS TRACK

3 | Wintal LCD

Manual 27LDVD05.indd Sec1:3Manual 27LDVD05.indd Sec1:3 12/07/2005 11:42:38 AM12/07/2005 11:42:38 AM

4. TV INSTALLATION

4.1 Connecting Antennas

To ensure good picture and sound, TV antenna system needs to be installed.  e
antenna system as shown can be sourced from TV equipment shops, which will
provide service for correct installation and connection. After installation, insertv the
75Ω antenna plug into the antenna jack as shown.

4.2 AV Video Input

4.3 S-Video Input

Wintal LCD | 4

Manual 27LDVD05.indd Sec1:4Manual 27LDVD05.indd Sec1:4 12/07/2005 11:42:39 AM12/07/2005 11:42:39 AM

4.4 YCbCr Input

4.5 YPbPr Input

4.6 PC (VGA) Connection

4.7 AV Video Output

5 | Wintal LCD

Manual 27LDVD05.indd Sec1:5Manual 27LDVD05.indd Sec1:5 12/07/2005 11:42:39 AM12/07/2005 11:42:39 AM

4.8 DVI Connection

5. SETTING UP YOUR LCD

5.1 Picture Setting

Press <SYS MENU> KEY until the screen displays as below.

1.
Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select

2.
Mode, Bright, Contrast, Colour and Sharpness for required adjusting option.
Press ◄ or ► key to adjust the setting selected.

3.

5.2 Audio Setting

Press <SYS MENU> KEY until the screen displays as below.

1.
Press ► key enter into audio menu press ▲ or ▼ key to select Mode, Volume,

2.
Treble, Bass, Balance and Surround for required adjusting option.
Press ◄ or ► key to adjust the setting selected.

3.

Wintal LCD | 6

Manual 27LDVD05.indd Sec1:6Manual 27LDVD05.indd Sec1:6 12/07/2005 11:42:39 AM12/07/2005 11:42:39 AM

5.3 Source Setting

Press <SYS MENU> key until the screen displays as below.

1.

Press ► key to access Input Group –Blue Screen –Language—Reset menu
setting.

2.

Press ▲ or ▼ key to select exact menu setting.

3.

Select <Input Group> menu, press ► key to access TV-SCART-DVD-PC for
selecting input source.

* In <SCART> menu, choose terminal-select in sub-menu SCART CVBS
or SCART RGB for input source.

4.

Press ▲ or ▼ key to access OSD <Language>, select suitable language.
Press ▲ or ▼ key to access <Reset >, it will come back to original factory
setting.

* If you have setup problems, use <Reset> menu to help you back to factory
setting.

5.4 TV Channel Search

Press <SYS MENU> key until the screen displays as below.

Press ► key to access Auto Tune – Manu Tune – Fine Tune – Sort – Add/skip–

1.
Color System – Sound System menu setting.
Press ▲ or ▼ key to select exact menu setting.

2.
Press ▲ or ▼ key to select <Manu Tune> or <Fine Tune > menu to adjust the

3.
TV.
Press ▲ or ▼ key to access<Sort> to exchange channel.

4.
Press ▲ or ▼ key to access <add/skip> to add or skip the channel.

5.

* Before tuning in the TV, choose the correct colour system and sound
system for your country. After that, choose the auto tune to start searching
the TV channel.

7 | Wintal LCD

Manual 27LDVD05.indd Sec1:7Manual 27LDVD05.indd Sec1:7 12/07/2005 11:42:39 AM12/07/2005 11:42:39 AM

6. TV / DVD COMBO REMOTE CONTROL

e

m

q

3

1

5

7

9

11

4

W

E

SLEEP MUTE MODE

R

O

P

2

EJECT

a

b

c

6

8

-/--

PICTURE

2 31

PAUS E

5 64

STOP

8

97

BACK

SYS MENU

0

CH+

AUDIO

10

ENTER

VOL - VOL +

12

13

CH-

SETUPRESUME MENU DISPLAY

d

SUBTITLESEARCH TITLE ZOOM

h

PBCCLEAN BOOKMARK

LANGUAGE

l

REPANGLE SLOW

A-B

p

g

f

k

ji

o

n

s

r

t

v

wu

27LDVD05

6.1 Remote control instructions in TV mode

1 Power ON/OFF
2 TV/AV/DVD/PC mode
3 Sleep timer 30-60-90-120 off
4 Mute
5 Number keys
6 System setting menu key
7 Access to several numbers program
8 Back to the previous screen
9 Picture mode
10 Audio mode
11 Decrease volume control key
12 Channel control and menu item execute key
13 Increase volume control key

Wintal LCD | 8

Manual 27LDVD05.indd Sec1:8Manual 27LDVD05.indd Sec1:8 12/07/2005 11:42:40 AM12/07/2005 11:42:40 AM

6.2 Remote Control Instructions in DVD Mode

a To eject the disc
b Pause
c To stop disc
e Access to menu in DVD mode
f Access to settings in DVD mode
d Resume playback
g Display control menu
i Locating a title
j Access to subtitles
h Search disc chapter and time
k Zoom of the picture
m Set bookmark
n Right/left sound track selection while playing VCD
l Clear all bookmarks
o Selecting language
q Slow key
r Repeat to the previous chapter
p Select movie vision angle
s Replaying point A to point B when selected
u Fast forward key
t Fast backward key
v Jump to next track
w Jump to previous track

7. REMOTE CONTROL SETUP

Open the cover

a.

Insert the supplied “AA” size batteries

b.

When inserting the batteries, make sure correct polarities as per the “+” and “-”
marks on the batteries are correct
Replace the battery cover

c.

7.1 Battery Usage Caution

To prevent battery leakage which may result in injury or damage to the remote:

Install all batteries correctly, and as marked on the remote control

1.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.)

2.
Remove batteries when the remote is not used for a long time

3.

9 | Wintal LCD

Manual 27LDVD05.indd Sec1:9Manual 27LDVD05.indd Sec1:9 12/07/2005 11:42:40 AM12/07/2005 11:42:40 AM

8. ACCESSORIES

Included with your Wintal LCD are the following accessories:

AC/DC Power Adapter

1.
One Remote Control

2.
2x 1.5V “AA” batteries

3.
One User Manual

4.
AV Cable

5.

9. DVD OPERATION INSTRUCTIONS

9.1 DVD Console Operation

Press DISPLAY to bring up the Console Menu.

1.
 e Console function is only available in DVD/DVD Audio/ DVD-VR/ VCD

2.
discs, and the display result may diff er among these disc types.

DVD-VR Console

Wintal LCD | 10

Manual 27LDVD05.indd Sec1:10Manual 27LDVD05.indd Sec1:10 12/07/2005 11:42:40 AM12/07/2005 11:42:40 AM

9.2 DVD System Setup Menu

Press < SETUP > key until the screen displays as photo 1.

1.
Press ◄ key or ► key to select LANGUAGE -- DISPLAY - AUDIO -

2.
LOCK - OTHERS menu setting.

9.3 DVD Language Setup

Press < SETUP > key until the screen displays as photo 2

1.
Press ▼ key to selecting Menu Language –Disc Audio –Disc Subtitle- Disc

2.
Menu setting.
Press ► key to adjust.

3.
Press < Enter > to confi rm the selection.

4.

Photo 2

9.4 DVD Display Setup

Press < SETUP > key until the screen displays as photo 3

1.
Press ▼ key to selecting TV Aspect –Display mode -TV Output Menu setting.

2.
Press ► key to adjust.

3.
Press < Enter > to confi rm the selection.

4.

11 | Wintal LCD

Manual 27LDVD05.indd Sec1:11Manual 27LDVD05.indd Sec1:11 12/07/2005 11:42:40 AM12/07/2005 11:42:40 AM

Photo 3

TV Aspect: Depending on the type of television you have, the image adjustment
off ers 2 options for your setting: 4:3 and 16:9.  is item is used to display image
data in the wide-screen fi lm on the normal TV set.  e option 16:9 is used when
the DVD player is connected to wide screen TV in Full Mode, and the screen will
display pictures in full size.
Display Mode item can only be modifi ed when the TV Display mode is set to 4:3.
Two options are provided: Letterbox and Panscan.
* Letterbox:  is image option will display the panoramic frame movie in the smaller
portion of the screen. And the movie might appear with black bars at the top and
bottom of the screen.
* Panscan:  is image option refers to pictures where the left and right edges of the
picture are cut off so it fi lls the whole screen. It is selected for the normal TV set
display.  is mode is selected when the picture is displayed in panoramic view and
complete scan format.
TV Output : Auto-PAL-NTSC

9.5 DVD Audio Setup

Press < SETUP > key until the screen displays as photo 4

1.
Press ▼ key to selecting Dolby Digital – DTS-Sample Freq.-Digital Output

2.
– DRC Menu setting.
Press ► key to adjust.

3.
Press < Enter > to confi rm the selection.

4.

Photo 4

Wintal LCD | 12

Manual 27LDVD05.indd Sec1:12Manual 27LDVD05.indd Sec1:12 12/07/2005 11:42:41 AM12/07/2005 11:42:41 AM

1. Dolby Digital indicates the output mode of the Dolby Digital.

Two options are provided: Bitstream and PCM

2. DTS indicates the output mode of the Digital Cinema.

Two options are provided: Bitstream and PCM.

BITSTREAM: Select this option when the unit is connected to an amplifi er

a.

with a built–in DTS decoder, Dolby Digital decoder and MPEG decoder, or
other audio equipment with digital audio output terminals.

PCM: Select this option when the unit is connected to the dual stereo digital

b.

audio equipment. When the DVD disc being played is recorded with the Dolby
Digital, MPEG1/ MPEG2 recording systems, the DVD player selects PCM as
the audio output.

Sample Freq. item off ers 2 options. If the connected receiver or amplifi er is

I.

incapable of processing digital input with sampling frequency of 96KHz, it will
select 48KHz as the sampling frequency to compress the signal to a standard
signal. After the 48KHz frequency is selected, the unit will automatically
convert the 96KHz signal into the 48KHz signal, and then your system will be
able to execute the decoding on the signals. On the other hand, if the receiver is
capable of outputting digital signals with a sampling frequency of 96KHz, it will
select 96KHz for the signal to be output as it is.
After 96KHz frequency is selected, the unit will be able to process all signals
without any further operations required.

Dynamic Range Compression (DRC) Provides 2 options: ON and OFF. When

II.

the option is set as ON, the dynamic range is compressed by reducing loud
sounds and increasing soft sounds, making it easier to listen at low volume but
still enjoy clear dialogues.

Note:
Audio-digital out function is only fi t for machines that have the digital out option.

9.6 DVD Lock Setup

Press < SETUP > key until the screen displays as photo 4

a.

Press ▼ key to selecting Rating—Password—Country Code Menu setting.

b.

Press ► key to adjust.

c.

Press < Enter > to confi rm the selection.

d.

13 | Wintal LCD

Manual 27LDVD05.indd Sec1:13Manual 27LDVD05.indd Sec1:13 12/07/2005 11:42:41 AM12/07/2005 11:42:41 AM

Rating item is used to set the rating level.

 Before you enter into the item, the system will request you to input the password
fi rst. After the password is entered correctly, the parental control rating level can be
changed.

 If you didn’t set any password of Parental Control, the system will request you to
input a new password.

 If you make a mistake before pressing ENTER, press CLEAR and enter your
4-digit password again.

 After the new password is entered successfully, press ▲/▼ to change the parental
control rating level. Including the Unlock level, there are a total of 9 levels in the
parental control rating levels. See the Parental Control section for details.

 e parental control function is only valid after the disc eject operation is performed
following the parental lock setting.

Password item is used to set the new password or change the old password. Before
you enter into the item, the system will request you to input the old pass word fi rst.
 e new password will be accepted only when the old password is input correctly.

 e Country code item is used to set the national code. It is a prerequisite that the
setting of the parental control level is only valid when the country code of the unit
is matched with that of the disc.  e country code item provides two alphabetical
letters for changes.

 Before user can enter into the country code item, the system will request you to
input the password fi rst.  e country code can be changed only after the password is
input successfully.

Wintal LCD | 14

Manual 27LDVD05.indd Sec1:14Manual 27LDVD05.indd Sec1:14 12/07/2005 11:42:41 AM12/07/2005 11:42:41 AM

9.7 “Others” Settings

Press < SETUP > key until the screen displays as photo 5.

a.

Press ▼ key to selecting PBC - Auto Play – B.L.E. –Load Default – Screen

b.

Saver – Last player Menu setting.
Press ► key to adjust.

c.

Press < Enter > to confi rm the selection.

d.

PHOTO 5

PBC item provides 2 options: ON and OFF. Please refer to the section VCD

1.

/ SVCD PBC Menu for the respective descriptions of ON and OFF option of
the PBC function.

Auto Play item provides 2 options: ON and OFF. When the option is set as

2.
ON, the auto play function will be activated.

  e DVD player will search for the DVD disc track that has the longest playback
time, and proceed to play the track.

 For the VCD and CD discs, the unit will automatically play the VCD/CD disc
from the beginning after the disc is recognized.

15 | Wintal LCD

Manual 27LDVD05.indd Sec1:15Manual 27LDVD05.indd Sec1:15 12/07/2005 11:42:41 AM12/07/2005 11:42:41 AM

10. TROUBLESHOOTING

Before calling our Service Centre, please check if you can troubleshoot the problem
by yourself.

Troubleshooting

No signal

Control

Please check that all cables and connectors are
correctly plugged in.

No colour shades Adjust the contrast, the colour and the brightness

Double or multiple
display image

Snow on the screen

 e remote control does
not work

No sound

No DVD

May be the result of an electrical wave disturbance
from another TV, Computer and Game machine or
Radio

 e cables of the antenna are not correctly plugged
in.

Please check the batteries are inserted correctly.
Check that the IR of the remote control is not
hidden by something.

Make sure that you have not press the MUTE button
of the panel or of the remote control.

Make sure if the TV Set have been switched to
DVD mode

Ensure disc is correctly inserted into the player.

DVD player not working
properly

Ensure the disc is not damaged and is of correct
format. Please wait as some discs require longer time
to read.

Wintal LCD | 16

Manual 27LDVD05.indd Sec1:16Manual 27LDVD05.indd Sec1:16 12/07/2005 11:42:41 AM12/07/2005 11:42:41 AM

11. SPECIFICATIONS

Screen Size 26 or 27 Inch
Display Type TFT LCD
Resolution(Pixel) 1280 x 720
Brightness 500 nits
Color 24 bit ( 16,7 million)
Contrast Ratio 600 : 1
View Angle(H/V ) Horizontal 160, Vertical 140, CR10
Aspect Ratio 16:9
Power 100-240 VAC, 50/60HZ. ≤180W
TV System PAL / NTSC
Video Input Format PAL / NTSC
Antenna Input Standard antenna socket 75Ω
Audio Output L / R 10W x 2
VGA Input Format 640*480/60Hz 800*600/60Hz 1024*768/60Hz

RGB 0.7 VP- P 75 Ω
VIDEO CVBS: 1.0 Vp – p, 75 Ω ; RCA

Input

AV Video 1.0 VP – 75 Ω ; Audio 20 KΩ ; RCA
YcbCr 1.0Vp-p 75Ω Audio 20KΩ; RCA
YpbPr 1.0Vp-p 75Ω
DVI 640*480/60Hz 800*600/60Hz 1024*768/60Hz
VIDEO 1 CVBS:1.0 VP- P 75 Ω; RCA

Output

AUDIO L/R 200 mVrms , 20 kΩ ( max.3.0 VP – P ) ; RCA

Disc Physical Format 12cm/8cm DVD, VCD, CD, MP3, JPEG,

CD-R, CD-RW

Video Decompression MPEG-2 (ISO/IEC-13818), MPEG-1, JPEG
IR Remote Control < 6m
Weight 20Kg
Dimensions 848(L) * 510 (H) * 240 (W) mm

 e manual is only for your reference, any change to the design and specifi cation

will not be advised.

17 | Wintal LCD

Manual 27LDVD05.indd Sec1:17Manual 27LDVD05.indd Sec1:17 12/07/2005 11:42:41 AM12/07/2005 11:42:41 AM

Manual 27LDVD05.indd Sec1:18Manual 27LDVD05.indd Sec1:18 12/07/2005 11:42:42 AM12/07/2005 11:42:42 AM