Page 1
Model: 27L05
27”
16:9 Digital LCD Television/ PC Monitor
Operating Manual
http://wintal.com.au
Manual 27L05.indd aManual 27L05.indd a 12/07/2005 11:43:31 AM12/07/2005 11:43:31 AM
Page 2
Manual 27L05.indd bManual 27L05.indd b 12/07/2005 11:43:43 AM12/07/2005 11:43:43 AM
Page 3
TABLE OF CONTENTS
1. PreFace 1
2. Safety Precautions 1
3. Front, Back Connections 2
4. TV Installation Guide 3
4.1 Connecting Antennas 3
4.2 AV Video Input 3
4.3 S-Video Input 3
4.4 YCbCr Connection 4
4.5 YPbPr Connection 4
4.6 PC (VGA) Connection 4
4.7 AV Video Out Connection 5
4.8 DVI Connection 5
5. Confi guration 6
5.1 Picture Setting 6
5.2 AUDIO SETTING 6
5.3 SOURCE SETTING 7
5.4 TV CHANNEL SEARCH 7
6. Remote Control Instructions 8
7. Remote Control Setup 9
7.1 Battery Usage Caution 9
8. Accessories 9
9. Troubleshooting & Advice 10
10. Specifi cations 11
Manual 27L05.indd cManual 27L05.indd c 12/07/2005 11:43:43 AM12/07/2005 11:43:43 AM
Page 4
1. PREFACE
Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.
2. SAFETY PRECAUTIONS
Place the Monitor on a stable surface.
Do not use the monitor with other fi xations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.
Power source
e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.
Connection cable
Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fi re or other incidents.
Lightning/ Holidays
Unplug the LCD during lightning storms or when not used for long periods of time.
1 | Wintal LCD
Manual 27L05.indd Sec1:1Manual 27L05.indd Sec1:1 12/07/2005 11:43:43 AM12/07/2005 11:43:43 AM
Page 5
3. FRONT, BACK CONNECTIONS
Front View and Controls
Back View
Rear Connections
DVI Input Y Pb PrPC Audio
R/L Input
PC
VGA Input Audio R/L
YCbCr AV Out
AV
1
AV
2
Audio R/L S-Video
CVBS Video
Audio R/L Out
CVBS Video Out
RF In
Wintal LCD | 2
Manual 27L05.indd Sec1:2Manual 27L05.indd Sec1:2 12/07/2005 11:43:43 AM12/07/2005 11:43:43 AM
Page 6
4. TV INSTALLATION GUIDE
4.1 Connecting Antennas
To ensure good picture and sound, TV antenna system needs to be installed. e
antenna system as shown can be sourced from TV equipment shops, which will
provide service for correct installation and connection. After installation, insert the
75-ohm antenna plug into the antenna jack as shown.
4.2 AV Video Input
3 | Wintal LCD
4.3 S-Video Input
Manual 27L05.indd Sec1:3Manual 27L05.indd Sec1:3 12/07/2005 11:43:44 AM12/07/2005 11:43:44 AM
Page 7
4.4 YCbCr Connection
4.5 YPbPr Connection
4.6 PC (VGA) Connection
Wintal LCD | 4
Manual 27L05.indd Sec1:4Manual 27L05.indd Sec1:4 12/07/2005 11:43:44 AM12/07/2005 11:43:44 AM
Page 8
4.7 AV Video Out Connection
4.8 DVI Connection
5 | Wintal LCD
Manual 27L05.indd Sec1:5Manual 27L05.indd Sec1:5 12/07/2005 11:43:44 AM12/07/2005 11:43:44 AM
Page 9
5. CONFIGURATION
5.1 Picture Setting
Press <SYS MENU> key until the screen displays as below.
Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select
a.
Mode, Bright, Contrast, Colour and Sharpness for required adjusting option.
Press ◄ or ► key to adjust the setting selected.
5.2 AUDIO SETTING
Press <SYS MENU> key until the screen displays as below.
Press ► key enter into audio menu press ▲ or ▼ key to select Mode, Volume,
a.
Treble, Bass, Balance and Surround for required adjusting option.
Press ◄ or ► key to adjust the setting selected.
b.
Wintal LCD | 6
Manual 27L05.indd Sec1:6Manual 27L05.indd Sec1:6 12/07/2005 11:43:44 AM12/07/2005 11:43:44 AM
Page 10
5.3 SOURCE SETTING
Press <SYS MENU> key until the screen displays as below.
Press ► key to access Input Group –Blue Screen –Language—Reset menu
a.
setting.
Press ▲ or ▼ key to select exact menu setting.
b.
Select <Input Group> menu, press ► key to access TV-SCART-DVD-PC for
c.
choose input source.
In <SCART> menu, will access to choose terminal-select in sub-menu SCART
CVBS or SCART RGB for input source.
Press ▲ or ▼ key to access OSD <Language>, select your language.
d.
Press ▲ or ▼ key to access the <Reset> function which will reset your LCD
back to default factory settings.
e.
5.4 TV CHANNEL SEARCH
Press <SYS MENU> key until the screen displays as below.
Press ► key to access Auto Tune – Manu Tune – Fine Tune – Sort – Add/skip–
a.
Color System –Sound System menu setting.
Press ▲ or ▼ key to select exact menu setting.
b.
Press ▲ or ▼ key to select <Manu Tune> or <Fine Tune > menu to adjust the
c.
TV.
Press ▲ or ▼ key to access <Sort> to exchange channel.
d.
Press ▲ or ▼ key to access <add/skip> to add or skip the channel.
e.
* Before tuning in the TV, please choose the correct colour system and sound system
for your country. After that, choose the auto tune to start searching.
7 | Wintal LCD
Manual 27L05.indd Sec1:7Manual 27L05.indd Sec1:7 12/07/2005 11:43:44 AM12/07/2005 11:43:44 AM
Page 11
6. REMOTE CONTROL INSTRUCTIONS
3
1
5
6
9
12
W
E
SLEEP MUTE MODE
R
O
P
2 31
5 64
8
-/--
PICTURE
VOL - VOL +
0
CH+
ENTER
CH-
97
BACK
SYS MENU
4
2
7
8
AUDIO
10
11
13
27L05
1 Power ON/OFF
2 TV/AV/PC Mode
3 Sleep Timer
4 Mute
5 Number keys
6 Access to several numbers program
7 System setting menu key
8 Return to the previous program
9 Picture mode
10 Audio mode
11 Channel control and menu item execute key
12 Decrease volume control key
13 Increase volume control key
Wintal LCD | 8
Manual 27L05.indd Sec1:8Manual 27L05.indd Sec1:8 12/07/2005 11:43:45 AM12/07/2005 11:43:45 AM
Page 12
7. REMOTE CONTROL SETUP
a.
Open the cover
b.
Insert the supplied “AA” size batteries
When inserting the batteries, make sure correct polarities as per the “+” and “-”
marks on the batteries are correct
c.
Replace the battery cover
7.1 Battery Usage Caution
To prevent battery leakage which may result in injury or damage to the remote:
Install all batteries correctly, and as marked on the remote control
1.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.)
2.
Remove batteries when the remote is not used for a long time
3.
8. ACCESSORIES
Included with your Wintal LCD are the following accessories:
AC/DC Power Adapter
1.
One Remote Control
2.
2x 1.5V “AA” batteries
3.
One User Manual
4.
AV Cable
5.
9 | Wintal LCD
Manual 27L05.indd Sec1:9Manual 27L05.indd Sec1:9 12/07/2005 11:43:45 AM12/07/2005 11:43:45 AM
Page 13
9. TROUBLESHOOTING & ADVICE
Before calling our Customer Centre, please check if you can the following
suggestions will solve your problem.
Troubleshooting Control
No signal
Please check that all cables and connectors are
correctly plugged in.
Incorrect colour shades Adjust the contrast, the colour and the brightness
Double or multiple
image display
Bad/ Snowy picture
The remote control does
not work
No sound
May be the result of an electrical wave disturbance
from another TV, Computer, Game console, or Radio
The cables of the antenna are not correctly plugged
in.
Please check that the batteries are inserted correctly.
Check that the IR of the remote control is not hidden
by something.
Make sure that you have not pressed the MUTE
button on the front panel or on the remote control.
Wintal LCD | 10
Manual 27L05.indd Sec1:10Manual 27L05.indd Sec1:10 12/07/2005 11:43:45 AM12/07/2005 11:43:45 AM
Page 14
10. SPECIFICATIONS
Screen Size 27 Inch
Display Type TFT LCD
Resolution(Pixel) 1280*720
Brightness 500nits
Color 24bit (16.7m)
Contrast Ratio 600:1
View Angle (H/V )
Aspect Ratio
Horizontal 160,Vertical 140.CR 10
16:9
Power Source 100-240VAC,50/60HZ. ≤180W
TV System
Video Input Format
Antenna Input
Audio Output
VGA Input Format
RGB
Input
VIDEO
AV
YCbCr
YPbPr
PAL/NTSC
PAL/ NTSC
Standard antenna socket 75Ω
L/R 10W*2
640*480, 800*600, 1024*768
0.7VP-P 75∩
CVBS:1.0VP-P,75∩;RCA
Video1.0Vp-p,75∩;Audio20k∩ ;RCA
1.0VP-P75∩;RCA
1.0VP-P75∩;RCA
DVI
Output VIDEO 1
AUDIO L/R
CVBS:1.0VP-P,75∩;RCA
200mVrms,20k∩(max.3.0VP-P);RCA
11 | Wintal LCD
IR remote control
Weight
<6m
18 kg
Dimensions 848 (L) x 510 (H) x 240 (W ) mm
e manual is only for your reference, any change to the design and specifi cation will
not be advise.
Manual 27L05.indd Sec1:11Manual 27L05.indd Sec1:11 12/07/2005 11:43:45 AM12/07/2005 11:43:45 AM
Page 15
Manual 27L05.indd Sec1:12Manual 27L05.indd Sec1:12 12/07/2005 11:43:46 AM12/07/2005 11:43:46 AM
Loading...