Page 1
Model: 20L05
20”
4:3 Digital LCD Television/ PC Monitor
Operating Manual
http://wintal.com.au
Manual 20L05.indd aManual 20L05.indd a 12/07/2005 11:44:01 AM12/07/2005 11:44:01 AM
Page 2
Manual 20L05.indd bManual 20L05.indd b 12/07/2005 11:44:12 AM12/07/2005 11:44:12 AM
Page 3
TABLE OF CONTENTS
1. PreFace 1
2. Safety Precautions 1
3. Front, Back Connections 2
4. TV Installation Guide 3
4.1 Connecting Antennas 3
4.2 AV Video Input 3
4.3 S-Video Input 3
4.4 YcbCr Connection 4
4.5 PC Connection 4
5. Confi guration 5
5.1 Auto Search 5
5.2 Manual Search 5
5.3 Fine Tune 5
5.4 Save Settings 5
5.5 Skip 5
6. Picture Setting 6
7. Audio Setting 6
8. Source Setting 6
9. Language Select 7
10. Lock 7
11. Reset 7
12. Blue Background 7
13. Channel Swap 7
14. PC Setting 8
15. Remote Control Instructions 9
16. Remote Control Setup 10
16.1 Battery Usage Caution 10
17. Accessories 10
18. Troubleshooting & Advice 11
19. Specifi cations 12
Manual 20L05.indd cManual 20L05.indd c 12/07/2005 11:44:12 AM12/07/2005 11:44:12 AM
Page 4
1. PREFACE
Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.
2. SAFETY PRECAUTIONS
Place the Monitor on a stable surface.
Do not use the monitor with other fi xations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.
Power source
e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.
Connection cable
Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fi re or other incidents.
Lightning/ Holidays
Unplug the LCD during lightning storms or when not used for long periods of time.
1 | Wintal LCD
Manual 20L05.indd Sec1:1Manual 20L05.indd Sec1:1 12/07/2005 11:44:12 AM12/07/2005 11:44:12 AM
Page 5
3. FRONT, BACK CONNECTIONS
Front View and Controls
Back View
Rear Connections
Wintal LCD | 2
Manual 20L05.indd Sec1:2Manual 20L05.indd Sec1:2 12/07/2005 11:44:12 AM12/07/2005 11:44:12 AM
Page 6
4. TV INSTALLATION GUIDE
4.1 Connecting Antennas
To ensure good picture and sound, TV antenna system needs to be installed. e
antenna system as shown can be sourced from TV equipment shops, which will
provide service for correct installation and connection. After installation, insert the
75-ohm antenna plug into the antenna jack as shown.
4.2 AV Video Input
3 | Wintal LCD
4.3 S-Video Input
Manual 20L05.indd Sec1:3Manual 20L05.indd Sec1:3 12/07/2005 11:44:12 AM12/07/2005 11:44:12 AM
Page 7
4.4 YcbCr Connection
To connect to the RGB/ Component input on your DVD player, also use the
supplied S-Video -> Component Adaptor.
4.5 PC Connection
Wintal LCD | 4
Manual 20L05.indd Sec1:4Manual 20L05.indd Sec1:4 12/07/2005 11:44:13 AM12/07/2005 11:44:13 AM
Page 8
5. CONFIGURATION
5.1 Auto Search
Press «MENU» key on the front control panel or «SYS MENU» key on the
•
remote control to go into the menu
en press ◄ or ► to access the menu below
•
Before selecting «Auto search», choose the «Colour system» and the «Sound
•
system» with ▲ or ▼
Select « Auto search » with ▲ or ▼
•
Press ◄ or ► to confi rm
•
5.2 Manual Search
Press «MENU» key on the front control panel or «SYS MENU» key on the
•
remote control to go into the menu
en press ◄ or ► to access the menu above
•
Press ▲ or ▼ to select «Manual search»
•
Confi rm with ◄ or ►
•
5.3 Fine Tune
If the reception signal is poor :
Press «MENU» key on the front control panel or «SYS MENU» key on the
•
remote control to go into the menu
en press ◄ or ► to access the menu above
•
Press ▲ or ▼ to select «Fine tune»
•
Press ◄ or ► to adjust
•
5.4 Save Settings
Press «MENU» key on the front control panel or «SYS MENU» key on the
•
remote control to go into the menu
en press ◄ or ► to access the menu above
•
Press ▲ or ▼ to select «Save»
•
Press ◄ or ► to save the channel you want when you use for example manual
•
search or sort channel option.
5.5 Skip
Skip function can jump the TV program you dislike. For example, to skip the
program:
Change the channel on the LCD to channel 2
•
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu above
•
5 | Wintal LCD
Manual 20L05.indd Sec1:5Manual 20L05.indd Sec1:5 12/07/2005 11:44:13 AM12/07/2005 11:44:13 AM
Page 9
Press ▲ or ▼ to select «SKIP»
•
Press ◄ o ► to activate «ON» and to delete the program 2
•
6. PICTURE SETTING
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu below
•
Press ▲ or ▼ to select the setting you wish to adjust
•
Press ◄ or ► to adjust the setting selected
•
7. AUDIO SETTING
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu below
•
Press ▲ or ▼ to select the setting you wish to adjust
•
Press ◄ or ► to adjust the setting selected
•
8. SOURCE SETTING
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu below
•
Press ▲ or ▼ to access SOURCE
•
Press ◄ or ► to select TV, AV, S-Video, YcrCb, or PC source
•
Wintal LCD | 6
Manual 20L05.indd Sec1:6Manual 20L05.indd Sec1:6 12/07/2005 11:44:13 AM12/07/2005 11:44:13 AM
Page 10
9. LANGUAGE SELECT
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu above
•
Press ▲ or ▼ to access LANGUAGE SELECT
•
Press ◄ or ► to choose the language
•
10. LOCK
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu above
•
Press ▲ or ▼ to access LOCK setting
•
Press ◄ or ► to lock the front control panel keys of the LCD
•
NB : to unlock the front control panel keys, press any key on the remote control
11. RESET
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu above
•
Press ▲ or ▼ to access RESET setting
•
Confi rm with ◄ o ► to reset the LCD to default factory settings
•
12. BLUE BACKGROUND
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu above
•
Press ▲ or ▼ to access BLUE BACKGROUND setting
•
Press ◄ or ► to activate the function
•
NB : is function can be activated for example when scanning program or when
reception signal is poor, if you wish to have a blue background instead of a screen
with snow and noise.
13. CHANNEL SWAP
is function is used to sort channels.
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu below
•
Press ▲ or ▼ to select the 2 channels you wish to swap
•
Press ◄ or ► to insert the 2 numbers of channels to be swapped
•
Swap by selecting «EXCHANGE» with ◄ or ►
•
7 | Wintal LCD
Manual 20L05.indd Sec1:7Manual 20L05.indd Sec1:7 12/07/2005 11:44:13 AM12/07/2005 11:44:13 AM
Page 11
14. PC SETTING
Set up the LCD to PC mode by changing the «MODE» key on remote control
•
Switch on PC with a contrast ratio 800*600 /60Hz
•
Connect the LCD to the PC with the VGA cable
•
Press «MENU» key on the front panel or «SYS MENU» on the remote control
•
to go into the menu
Press ◄ or ► to access the menu above
•
Press ▲ or ▼ to select the setting you wish to adjust
•
Adjust with ◄ or ►
•
Wintal LCD | 8
Manual 20L05.indd Sec1:8Manual 20L05.indd Sec1:8 12/07/2005 11:44:13 AM12/07/2005 11:44:13 AM
Page 12
15. REMOTE CONTROL INSTRUCTIONS
3
1
5
6
9
12
W
E
SLEEP MUTE MODE
R
O
P
2 31
5 64
8
-/--
PICTURE
VOL - VOL +
0
CH+
ENTER
CH-
97
BACK
SYS MENU
4
2
7
8
AUDIO
10
11
13
9 | Wintal LCD
20L05
01 Power ON/OFF
02 TV/AV/PC Mode
03 Standby mode
04 Mute
05 Number keys
06 Access to several numbers program
07 System setting menu key
08 Return to the previous program
09 Picture mode
10 Audio mode
11 Channel control and menu item execute key
12 Decrease volume control key
13 Increase volume control key
Manual 20L05.indd Sec1:9Manual 20L05.indd Sec1:9 12/07/2005 11:44:14 AM12/07/2005 11:44:14 AM
Page 13
16. REMOTE CONTROL SETUP
a.
Open the cover
b.
Insert the supplied “AA” size batteries
When inserting the batteries, make sure correct polarities as per the “+” and “-”
marks on the batteries are correct
c.
Replace the battery cover
16.1 Battery Usage Caution
To prevent battery leakage which may result in injury or damage to the remote:
Install all batteries correctly, and as marked on the remote control
1.
Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.)
2.
Remove batteries when the remote is not used for a long time
3.
17. ACCESSORIES
Included with your Wintal LCD are the following accessories:
AC/DC Power Adapter
1.
One Remote Control
2.
2x 1.5V “AA” batteries
3.
One User Manual
4.
AV Cable
5.
Wintal LCD | 10
Manual 20L05.indd Sec1:10Manual 20L05.indd Sec1:10 12/07/2005 11:44:14 AM12/07/2005 11:44:14 AM
Page 14
18. TROUBLESHOOTING & ADVICE
Before calling our Customer Centre, please check if you can the following
suggestions will solve your problem.
Troubleshooting Control
No signal
Please check that all cables and connectors are
correctly plugged in.
Incorrect colour shades Adjust the contrast, the colour and the brightness
Double or multiple
image display
Bad/ Snowy picture
The remote control does
not work
No sound
May be the result of an electrical wave disturbance
from another TV, Computer, Game console, or Radio
The cables of the antenna are not correctly plugged
in.
Please check that the batteries are inserted correctly.
Check that the IR of the remote control is not hidden
by something.
Make sure that you have not pressed the MUTE
button on the front panel or on the remote control.
11 | Wintal LCD
Manual 20L05.indd Sec1:11Manual 20L05.indd Sec1:11 12/07/2005 11:44:14 AM12/07/2005 11:44:14 AM
Page 15
19. SPECIFICATIONS
Screen Size 20.1 Inch
Display Type LCD TFT
Resolution(Pixel) 800 x 600
Brightness 500 cd / m²
Color 24 bit ( 16,777,216)
Contrast Ratio 500 : 1
View Angle(H/V ) Horizontal 160,Vertical 140, CR10
Aspect Ratio 4:3
Power 100-240 VAC, 12V 50/60HZ.
Power consumption 60W
TV System PAL / NTSC
Video Input Format PAL / NTSC
Antenna Input Standard antenna socket 75 Ω
Audio Output L / R 3W + 3W
VGA Input 800 x 600 60HZ
RGB 0.7 VP- P 75 Ω
Input
VIDEO CVBS: 1.0 Vp – p, 75Ω; RCA
AV Video 1.0 VP – 75 Ω; Audio 20 KΩ ; RCA
VIDEO 1 CVBS:1.0 VP- P 75 Ω; RCA
Output
AUDIO L/R 200 m Vrms , 20 kΩ ( max.3.0 VP – P ) ; RCA
VIDEO 2 1.0 VP – P , 75 Ω ; RCA
Eff ective Range IR < 6 m
Weight 9.2 Kg
e manual is only for your reference, any change to the design and specifi cation will
not be advise.
Wintal LCD | 12
Manual 20L05.indd Sec1:12Manual 20L05.indd Sec1:12 12/07/2005 11:44:14 AM12/07/2005 11:44:14 AM
Loading...