OPERATIONS MANUAL
ENC-EPX-G-1000
NOTE: This manual has been designed and created for use as part of WinSystems Technical
Manuals CD and/or the WinSystems website. If this manual or any portion of the manual
is downloaded, copied or emailed, the links to additional information (i.e. software, cable
drawings) may be inoperable.
WinSystems reserves the right to make changes in the circuitry
and specications at any time without notice.
Copyright 2009 by WinSystems. All Rights Reserved.
REVISION HISTORY
P/N
ECO Number Date Code Rev Level
ORIGINATED 080620 A
08-167, 08-171 090113 A.1
Table of Contents
Introduction 1
General Information 1
Features 1
Ordering Information 2
Construction 2
Cables 3
Mechanical Drawing 4
Three Dimensional Assembly Model 4
8” Extrusion 5
End Plate-Power 6
End Plate I/O 7
EPX CPU Mount Plate 8
Ethernet Connector Mount Plate 9
Prole Data 10
Specications 12
WARRANTY REPAIR INFORMATION 13
This page is intentionally left blank.
Introduction
This manual is intended to provide the necessary information regarding conguration and usage
of the ENC-EPX-G-1000 enclosure. WinSystems maintains a Technical Support Group to help
answer questions regarding usage of the enclosure. For answers to questions not adequately
addressed in this manual, contact Technical Support at (817) 274-7553, Monday through
Friday, between 8 AM and 5 PM Central Standard Time (CST).
General Information
Features
Enclosure
• Low cost EPIC SBC Enclosure
• Quick and easy assembly
• Accepts PC/104 modules
• Up to 2 modules can be mounted inside
• Custom congured end plates available
• SBC mounting plate with PEM standoffs
• Mounting plate slides in/out of main housing
• Rugged 0.080" thick end plates
• End plate I/O connector cutouts provided
• RoHS compliant
Construction
• Heavy duty extruded aluminum construction
• Black Painted Outer Shell nish
• Dimensions: 9.5"W x 6.0"D x 3.0"H
090113 OPERATIONS MANUAL ENC-EPX-G-1000 1
The ENC-EPX-G-1000 is a simple, low-cost enclosure for EPIC-based single board computer
(SBC) systems with PC/104 expansion modules. The interior of the enclosure is large enough to
install any PC/104 module even with latching I/O connectors.
The enclosure allows a designer to package a variety of system congurations quickly and
easily. Applications include military/defense, communications/networking, industrial data
acquisition, control, and instrumentation.
Ordering Information
The ENC-EPX-G-1000 enclosure supports the EPIC SBC EPX-GX500. WinSystems has standard
end plates and cable sets for its EPIC single board computers. The kit, part number KIT-HW-G322-ENC1 is the hardware kit for the ENC-EPX-G-1000 using the EPX-GX500.
WinSystems also offers custom end plates for customers needing 50 or more units.
Contact your WinSystems Applications Engineer for more information about custom units.
Construction
The ENC-EPX-G-1000 is made up of an extruded aluminum outer cover, two end plates and an
EPIC computer module base plate, and can mount in a variety of congurations. The enclosure
weighs 2.4 lbs and is RoHS compliant. The standard end plates do not come with cables attached.
WinSystems offers the cable set, part number CBL-SET-322-G-ENC-1 to support the ENC-EPX-G-
1000.
See the Mechanical Drawing section of this document for more information on specic dimensions
090113 OPERATIONS MANUAL ENC-EPX-G-1000 2
Cables
Part Number Description
CBL-SET-322-G-ENC-1 ENC-EPX-G-1000 complete cable set for the EPX-GX500
CBL-234-G-1-0.916 14-pin ribbon to 15-pin D-sub CRT adapter
CBL-251-G-2-1.0 Multi-I/O Cable
CBL-270-G-3-0.583 Audio Access Cable
CBL-275-G-2-0.667 USB Cable
CBL-316-G-1-0.5 Internal power supply cable
CBL-317-G-2-1.5 External power supply cable w/o external termination
CBL-327-G-1-1.08 Digital I/O Cable
090113 OPERATIONS MANUAL ENC-EPX-G-1000 3
Mechanical Drawing
Three Dimensional Assembly Model
090113 OPERATIONS MANUAL ENC-EPX-G-1000 4
8” Extrusion
090113 OPERATIONS MANUAL ENC-EPX-G-1000 5
End Plate-Power
090113 OPERATIONS MANUAL ENC-EPX-G-1000 6
End Plate I/O
090113 OPERATIONS MANUAL ENC-EPX-G-1000 7
EPX CPU Mount Plate
090113 OPERATIONS MANUAL ENC-EPX-G-1000 8
Ethernet Connector Mount Plate
090113 OPERATIONS MANUAL ENC-EPX-G-1000 9
Prole Data
F
E
C
B
D
A
Profile Data
A = 9.68" Mounting Flange - Overall
B = 8.92" Mount Hole, 1/4", 4 Places
C = 5.00" Mount Hole 1/4", 4 Places
D = 6.00" Assembly - Overall
E = 3.03" Height - Overall
F = .08" Clearance
090113 OPERATIONS MANUAL ENC-EPX-G-1000 10
Specications
Materials
Outer cover :Extruded aluminum
End plates :0.080” aluminum
Base plate :0.625” aluminum
Finish :Black paint (except for the clear internal mouting plate)
Mechanical
Size :9.5”W x 6.0”D x 3.0”H
Weight :2.4 lbs
090113 OPERATIONS MANUAL ENC-EPX-G-1000 11
WARRANTY REPAIR INFORMATION
(http://www.winsystems.com/company/warranty.cfm)
WARRANTY
WinSystems warrants to Customer that for a period of two (2) years from the date of
shipment any Products and Software purchased or licensed hereunder which have been
developed or manufactured by WinSystems shall be free of any material defects and shall
perform substantially in accordance with WinSystems’ specications therefore. With respect
to any Products or Software purchased or licensed hereunder which have been developed or
manufactured by others, WinSystems shall transfer and assign to Customer any warranty
of such manufacturer or developer held by WinSystems, provided that the warranty, if any,
may be assigned. Notwithstanding anything herein to the contrary, this warranty granted by
WinSystems to the Customer shall be for the sole benet of the Customer, and may not be
assigned, transferred or conveyed to any third party. The sole obligation of WinSystems for
any breach of warranty contained herein shall be, at its option, either (i) to repair or replace
at its expense any materially defective Products or Software, or (ii) to take back such Products
and Software and refund the Customer the purchase price and any license fees paid for the
same. Customer shall pay all freight, duty, broker’s fees, insurance charges for the return of
any Products or Software to WinSystems under this warranty. WinSystems shall pay freight
and insurance charges for any repaired or replaced Products or Software thereafter delivered
to Customer within the United States. All fees and costs for shipment outside of the United
States shall be paid by Customer. The foregoing warranty shall not apply to any Products of
Software which have been subject to abuse, misuse, vandalism, accidents, alteration, neglect,
unauthorized repair or improper installations.
THERE ARE NO WARRANTIES BY WINSYSTEMS EXCEPT AS STATED HEREIN, THERE ARE NO
OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN NO EVENT
SHALL WINSYSTEMS BE LIABLE FOR CONSEQUENTIAL, INCIDENTIAL OR SPECIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF DATA, PROFITS OR GOODWILL.
WINSYSTEMS’ MAXIMUM LIABILITY FOR ANY BREACH OF THIS AGREEMENT OR OTHER CLAIM
RELATED TO ANY PRODUCTS, SOFTWARE, OR THE SUBJECT MATTER HEREOF, SHALL NOT
EXCEED THE PURCHASE PRICE OR LICENSE FEE PAID BY CUSTOMER TO WINSYSTEMS FOR
THE PRODUCTS OR SOFTWARE OR PORTION THEREOF TO WHICH SUCH BREACH OR CLAIM
PERTAINS.
WARRANTY SERVICE
1. To obtain service under this warranty, obtain a return authorization number. In the
United States, contact the WinSystems’ Service Center for a return authorization number.
Outside the United States, contact your local sales agent for a return authorization number.
2. You must send the product postage prepaid and insured. You must enclose the products
in an anti-static bag to protect from damage by static electricity. WinSystems is not responsible
for damage to the product due to static electricity.
090113 OPERATIONS MANUAL ENC-EPX-G-1000 12
Loading...