Winston Products CAT522, CAT529, CAC500 Series General Manual

Advantage
Application Sheet
Application: Retherming Market(s): Schools, institutions, healthcare,
QSR, full service
Product: Fresh vegetables
Other Suitable Food Product(s):
density fibrous vegetables, and increasing time by 20% for high-density vegetables.
Models to Consider: CAT522, CAT529, CAC500 Series cook & holds.
CVap equipment helps preserve the integrity of the food – cooking or reheating it to a safe serving temperature without excessive breakdown in texture or nutritional value. Vegetables prepared in a CVap appliance tend to maintain their natural colors, because vapor cooking is a more gentle process than utilizing a rapid steam or boil.
Recommended Product Line: CVap
®
therm & holds
Recommended Set Points: Retherm Pre-programmed Channel 1 - Food Temperature 200˚F,
Food Texture 230˚F, Differential 30˚F.
Cook time varies - vegetables 14-25 minutes. Application may also
be cooked on Channel 3.
Recommended Process: Preheat unit on Channel 1. Place food product in 2” or 4” hotel/steam
table pans. When display shows LOAD, place pans in the CAT522 unit, or first on oven racks or sheet pans in the CAT529. Cook to 165˚F, or follow manufacturer’s instructions. Remove product after cook cycle. For additional holding time open the cabinet door for two minutes at the conclusion of the cook cycle to allow heat to escape. Close door and hold for maximum of 30 minutes. It is advisable to use perforated pans rather than non-perforated when cooking vegetables.
CAT522
www.winstonind.com
DOC070116L Rev 2
rs 3-07-07
Loading...