Winston Products CAT522, CAT529, CA8522 Series, CAC Series General Manual

Application Sheet

Application: Retherming
Market(s): Schools, institutions, healthcare,

QSR, full service

Product: Breaded or battered starches

Examples: french toast sticks,
pancakes, sausage sticks, egg rolls,
bakery sandwiches, egg & ham or
sausage sandwiches, pizza sticks,
stuffed breadsticks, taquitos, or
rolled burritos, tacos.

Other Suitable
Food Product(s):

Batter-dipped and double-breaded ovenable fry-type products.

Recommended
Product Line CVap

®

therm & hold

Recommended
Set Points: Retherm Pre-programmed Channel 2 - Food Temperature 170˚F,

Food Texture 290˚F, Differential 120˚F.

Cook time varies - 14-20 minutes, Cook times are suggested from a

frozen stage. Reduce cook time by approximately 15% if food is
thawed.

Recommended
Process: Preheat unit on Channel 2. Place the food product on parchment paper

or directly on sheet pans, allowing approximately 1-1/2” border around
edges. When digital display shows LOAD, place the pans in the
CAT522 unit, or first on oven racks or sheet pans in the CAT529. Cook
product to an internal temperature of 165˚F, or according to the
manufacturer’s instructions. Once cook cycle is complete, move
product to holding cabinet or prepare for service. To maximize holding
time, open the unit door for two minutes upon completion of cook
cycle, then close the door. Hold product for a maximum of 25 -30
minutes. Hold time may also be increased by reducing cook times and
allowing product to carry over cook cycle into the hold cycle

www.winstonind.com

DOC070116F Rev 0

rs 1-16-07

Models to Consider: CAT522, CAT529, CA8522 Series cook & hold, or CAC Series cook & hold

(on high-yield cycle).

CVap technology uses a combination of moist and dry heat to thermalize.
This helps small processed proteins to retain internal moisture, without
saturating food with excess moisture. This allows a moist interior while
producing a crisp exterior.

ADVANTAGE