Winston Porter W005059476 Assembly Instructions

Label Picture Description QTY

A Chair Base 1

B Chair Backrest 1

Assembly Instructions

Caution: You must read this before you proceed

Reclining Chair

Parts List

Page 1 OF 9

C Left Wing 1

D Right Wing 1

Before

Begining

Assembly:

Hardware

Page 2 OF 9

Step 1

Overview

Assembly Steps

This Recliner Chair has multiple parts and may require about 30 minutes to assemble.
To give you an overview of the Chair parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.

Take out the Chair Backrest(B) from Chair Base(A).
Place the Chair Base(A) facedown on a clean, non-marring surface.

Left Wing(C)

FRONT FACING

Chair Backrest(B)

Chair Base(A)

Right Wing(D)

B

A

B

Page 3 OF 9

Step 2

Step 4

Step 3

Take out the both non-wovens bags from the back of Chair Base(A) and open them to
take out the Left Wing(C) and Right Wing(D).

With assistance from your adult partner, hold up the Chair Backrest(B) and stand
behind the Chair Base(A).
Insert the small metal arms on the sides of the Chair Backrest(B) into the prefabricated
slide lock gadget on the Chair Base(A) as shown above.
Firmly but gently, push the Chair Backrest(B) downwards until the Chair Backrest(B) is
fully slotted and locked into position.

C

D

C

Insert

Insert

A

B

A

B

Page 4 OF 9

Step 5
Step 5

Align the mounting brackets of the Left Wing(C) with those on the left side of Chair
Backrest(B).
Then slide Left Wing(C) downward by hand to make sure it locks into position as
shown in the picture.

Align the mounting brackets of the Right Wing(D) with those on the left side of Chair
Backrest(B).
Then slide Right Wing(D) downward by hand to make sure it locks into position as
shown in the picture.

Smooth down the fabric flap on the Chair Backrest(B).
Run your hands down both sides of the flap, from top to bottom, allowing the velcro
tape to adhere to the flap under the seat of the chair.

D

B

B

Page 5 OF 9

Step 7

Step 6

Disassembly Instructions

Push up on the Right Wing(D) and Left Wing(C) one by one until they are removed
from the Chair Backrest(A).

Make sure all parts are connected and securely locked into position.
Your Reclining Chair is ready for use.

This Reclining Chair can only be used on a flat, level surface.

A

B

D

C

Page 6 OF 9

Step 8

Do not allow children to play on the Recliner.
Always leave the Recliner in an upright and closed position after use.
Keep hands and feet clear of the footrest mechanism and any gaps.
Don't sit on the armrests of Recliner.

To Disassemble Recliner:

Open the flap on the Backrest(A), use a screwdriver (Don't use your fingers) pressing
outward on the metal ear on the preattached Metal Bracket on one side of the Chair
Base(B).
With assistance of your adult partner to keep the Chair Base(B) in place, pull the
Backrest(A) upward at the same time, repeat the same step for another side.

Warning

Velcro

A

B

Page 7 OF 9

Supervise children, when they use the Recliner.

To get into the Recline position:

Sit into the seat.
Open the trigger on the outside of right armrest.
Use your body weight and push backwards into the seat into a fully reclined position.

To move the Chair back into the Upright Position:

Tilt your body weight slightly forward and upwards.
The seat back will come up to an upright position.
Use your feet to push the Footrest down.
The Chair will automatically lock when it is in the fully upright position.
Where necessary, use your arms help lift/push yourself out of the seat

User Instructions

Recliner

Please read the Instruction Manual below carefully before use.

This is a Recliner Chair. At anytime in a reclined seat position or in the upright position.
You may enjoy the rocking motion by using your body weight in a back-front rocking
motion.

Page 8 OF 9

Page 9 OF 9