Backless Corner Nook
We are here to help! Before you return It - contact us.
We do our best to insure that your furniture arrives in excellent condition. In the
event that a part is damaged or missing, we will be happy to provide you with
replacement parts, at no charge, within 30 days of purchase, providing the parts
are available in our warehouse and the item purchased is part of our current
invetory. In order to recelve spare parts, at no charge, you must provide proof of
purchase within 30 days.
If you need assistance with assembly or replacement parts, please call Linon
Customer service, prior to returning the item to the store.
PAGE
HARDWARE PACKAGE COUNT (CORNER BENCH)
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE
OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE IDENTIFICATION COLUMN. CALL
CUSTOMER SERVICE IF ANY PARTS ARE MISSING. FOLLOW THE LETTER IDENTIFICATION WHEN
READING THE ASSEMBLY DRAWING “A” THROUGH “X”.
HARDWARE IDENTIFICATION
A
B
C
D
E
E
G
H
I
J
K
L
WOODEN DOWEL 1 3/16" LONG
WOODEN DOWEL
SCREW 1 3/16" LONG
SCREW 1 3/16" LONG
SCREW
SCREW
UNION SCREW
STEM
ALLEN WRENCH
SAFETY HINGE
SCREW
4,5 x 35mm
4,5 x 30mm
3,5 x 14mm
M4 x 19mm
8 x 30mm
8 x 20mm
7 x 40mm
33
12
37
37
30
05
08
04
02
02
04
M
N
O
P
Q
R
U
V
X
RIGHT RUNNER
LEFT RUNNER
HINGE
HANDLE
SCREW
WOODEN DOWEL 2" LONG
WOODEN DOWEL 2" LONG
WOODEN DOWEL 1 3/16" LONG
SCREW
IMPORTANT:
PLEASE USE ALL THE HARDWARE MENTIONED ABOVE.
THEY WILL ASSURE THE ITEM STABILITY AND SAFETY.
3,5 x 14mm
10 x 50mm
8 x 50mm
10 x 30mm
7 x 60mm
01
01
03
02
12
03
06
10
07
TOOLS REQUIRED
A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND AN ALLEN WRENCH (PROVIDED J).
USE A PLASTIC HEAD MALLET TO TAP I N
BE USED TO KNOCK IN WOODEN DOWELS.
BEFORE YOU BEGIN ASSEMBLY, SELECT AN OPEN SPACE, PREFERABLY ON A CARPET AREA.
IF ASSEMBLING ON A HARD SURFACE, OR ON A WOOD FLOOR, USE A BLANKET
TO PREVENT SCRATCHING FURNITURE AS WELL AS WOOD FLOOR.
WOODEN DOWELS. NOTE: A PIECE OF WOOD CAN ALSO
PAGE 2
PARTS IDENTIFICATION
1 – LEFT SIDE PANEL
2 – LARGE FRONT PANEL
3 – SMALL FRONT PANEL
4 – SMALL STORAGE BACK PANEL
5 – SMALL BACK PANEL
6 – DIVISON
7 – LARGE STORAGE BACK PANEL
8 – OPEN SEAT
9 – FIXED SEAT
10 – SIDE SKIRTING BOARD (2X)
11 – SMALL FRONT SKIRTING BOARD
12 – LARGE FRONT SKIRTING BOARD
13 – SIDE RAIL
14 – UNION RAIL
15 – STORAGE DIVISION (2X)
16 – LARGE BOTTOM PANEL
17 – STORAGE CLEAT (2X)
18 – CLEAT (4X)
19 – DRAWER FRONT PANEL
20 – DRAWER LEFT SIDE PANEL
21 – DRAWER BACK PANEL
22 – DRAWER RIGHT SIDE PANEL
23 – DRAWER BOTTOM PANEL
32 – STORAGE DIVIDER
32
PAGE 3
STEP 1)
1.1) INSERT (22) WOODEN DOWELS (A) IN THE FOLLOWING PIECES, AS PER DRAWING BELOW:
1 – LEFT SIDE PANEL
6 – DIVISON
10 – SIDE SKIRTING BOARD (2X)
11 – SMALL FRONT SKIRTING BOARD
12 – LARGE FRONT SKIRTING BOARD
13 – SIDE RAIL
14 – UNION RAIL
1.2) INSERT (12) WOODEN DOWELS (B) ON THE CLEATS # 17 (2X) AND # 18 (4X), AS PER DRAWING BELOW:
1.3) INSERT (02) LONG WOODEN DOWELS (U) TO PIECE #06 AS PER DEMONTRATION BELOW:
B
4x
U
U
A
PAGE 4
STEP 1)
1.4) INSERT (07) WOODEN DOWELS (A) TO LARGE BOTTOM PANEL # 16 AND LARGE FRONT PANEL # 02,
AS PER DRAWING BELOW:
A
PAGE 5
STEP 1)
1.5) INSERT (04) LONG WOODEN DOWELS (U)TO SMALL STORAGE BACK PANEL #04 AND STORGE DIVIDER,
#32 AS PER DRAWING.
1.6) INSERT (10) WOODEN DOWELS (V) TO PIECES #03,#04,#05 AND #32.
1.7) INSERT (03) WOODEN DOWELS (R) TO SMALL FRONT PANEL #03, AS PER DRAWING.
V
R
V
V
U
U
V
32
V
R
R
V
R
V
V
3
U
U
U
U
V
4
5
V
V
PAGE 6
STEP 1)
1.8) FIX (03) HINGES (O) TO OPEN SEAT #08, USING (09) SCREWS (E), A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE.
3x
O
O
O
O
PAGE 7
STEP 2)
2.1) JOIN SMALL FRONT PANEL #03 TO STORAGE DIVIDER #32, USING THE WOODEN DOWELS ALREADY
INSERTED, AS GUIDE.
32
32
3
3
PAGE 8
STEP 3)
3.1 ) FIX CLEATS # 18 (4X) TO LEFT SIDE PANEL # 1, SMALL FRONT PANEL #3 ALREADY JOINTED WITH
PIECE #32 , SMALL STORAGE BACK PANEL #4 AND SMALL BACK PANEL # 5, USING (12) SCREWS (D), A
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN
BELOW.
3.2) FIX STORAGE CLEATS #17 (2X) TO LARGE FRONT PANEL #02 AND LARGE STORAGE BACK PANEL #7,
USING (04) SCREWS (D), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED
HOLES AS GUIDE, AS SHOWN BELOW.
D
D
18
5
D
16x
1
D
D
18
D
D
4
32
D
D
18
D
D
3
D
18
D
D
17
7
D
PAGE 9
STEP 4)
4.1) JOIN THE PIECES # 10 (2X) TO PIECES #01 AND # 13, USING THE DOWELS ALREADY INSERTED.
4.2) JOIN THE PIECES # 12 TO PIECE #02, USING THE WOODEN DOWELS ALREADY INSERTED.
4.3) FIX THE PIECES USING (10) SCREWS (D), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE
PRE-DRILLED HOLES AS GUIDE, AS SHOWN BELOW.
D
10x
PAGE 10
STEP 5)
5.1) FIX LARGE BOTTOM PANEL # 16 TO LARGE FRONT PANEL #2, USING (04) SCREWS (C), A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE, AS SHOWN BELOW.
4x
C
PAGE 11
STEP 6)
6.1) JOIN PIECES # 1 AND # 6 TO THE PRE ASSEMBLED STRUCTURE, USING THE WOODEN DOWELS
ALREADY FIXED.
6.2) FIX PIECES USING (07) SCREWS (C ), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE
PRE-DRILLED HOLES AS GUIDE.
3x
C
PAGE 12
STEP 7)
7.1) FIX LARGE BACK STORAGE PANEL #07 TO PRE ASSEMBLED STRUCTURE, USING (05) SCREWS (C),
(02) SCREWS (X), (03) SCREWS (G), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AN ALLEN WRENCH
(PROVIDED (J), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE .
NOTE: MAKE SURE TO USE THE SCREWS (X) TO FIX THE PIECE #07 TO # 06 AND THE SCREW (G)
THE PIECE #07 TO #01.
7
J
X
2x
6
X
12
J
3x
G
G
G
C
C
7
C
C
6
X
C
12
9x
PAGE 13
STEP 8)
8.1) FIX PIECES #01 AND #02 USING (03) SCREWS (C ), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED)
AND THE PRE DRILLED HOLES AS GUIDE.
8.2) IF YOU LIKE TO USE THE DIVISON IN YOUR STORAGE AREA, FIX THE STORAGE DIVISIONS #15 TO
USING (04) SCREWS (Q), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED
HOLES AS GUIDE.
C
C
C
2
C
7
Q
15
Q
15
Q
7
Q
Q
4x
PAGE 14
STEP 9)
9.1) FIX THE METAL GLIDE (N) TO SMALL FRONT PANEL #03, USING (03) SCREWS (E) AND A PHILLIPS
HEAD SCREWDRIVER (NOT PROVIDED).
9.2) FIX THE METAL GLIDE (M) TO SMALL STORAGE BACK PANEL #04, USING (03) SCREWS (E) AND A
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED).
NOTE: PAY ATTENTION ON THE CORRECT POSITION OF THE SCREWS
N
FEE
Correct position of the screws.
E
M
E
E
Correct position of the screws.
E
PAGE 15
STEP 10)
10.1) FIX THE SET OF PIECES #10 AND #13 TO SMALL FRONT PANEL #03 AND SMALL STORAGE BACK
PANEL #04, USING (04) SCREWS (D), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN
DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES AS GUIDE .
10.2) FIX UNION RAIL # 14 TO SMALL FRONT PANEL #03 AND SMALL STORAGE BACK PANEL #04, USING (02)
SCREWS (C), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN DOWELS ALREADY
INSERTED AND THE PRE-DRILLED HOLES AS GUIDE .
14
Front
PAGE 16
STEP 11)
11.1 COMPLETE THE ASSEMBLY FIXING THE BACK PANEL # 05 WITH (05) SCREWS (X), AN ALLEN
WRENCH (PROVDED J), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE-DRILLED HOLES
AS GUIDE .
5x
J
X
X
X
X
X
X
PAGE 17
STEP 12)
11.1) FIX SMALL FRONT SKIRTING BOARD #11 TO SMALL FRONT PANEL #03, USING (03) SCREWS (D), A
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE
PRE-DRILLED HOLES AS GUIDE .
PAGE 18
STEP 13)
13.1) JOIN BOTH PRE ASSEMBLED STRUCTURES USING THE WOODEN DOWELS AS GUIDE.
PAGE 19
STEP 14)
14.1) FIX PIECES USING (02) SCREWS (G) AND AN ALLEN WRENCH (PROVDED J).
14.2) COMPLETE THE ASSEMBLY USING (04) STEMS (I), (08) UNION SCREWS (H) AND THE ALLEN WRENCH
PROVIDED (J), AS PER DRAWING AND DETAILS.
J
J
J
PAGE 20
STEP 15)
15.1) JOIN THE FIXED SEAT #9 TO ASSEMBLED STRUCTURE USING THE WOODEN DOWELS ALREADY
INSERTED, AS PER DRAWING BELLOW:
PAGE 21
STEP 16)
16.1) FIX THE SEAT USING (12) SCREWS (C), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND THE
PRE-DRILLED HOLES AS GUIDE.
9
2
3
12
PAGE 22
STEP 17)
DRAWER ASSEMBLY
17.1) FIX DRAWER BACK PANEL # 21 TO SIDE PANELS # 20 AND # 22, USING (04) SCREWS (D), A PHILLIPS HEAD
SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE .
17.2) SLIDE THE BOTTOM PANEL # 23, USIING THE GROOVE AS GUIDE.
17.3) ATTACH (01) HANDLE (P) TO DRAWER FRONT PANEL #19, USING (02) SCREWS (L), A PHILLIPS HEAD
SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE .
17.4) INSERT (04) WOODEN DOWELS (A) TO PIECES # 20 AND # 22. THEN JOIN THE DRAWER FRONT
PANEL # 19.
17.5) FIX DRAWER FRONT PANEL # 19, USING (04) SCREWS (C), A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED)
AND THE PRE-DRILLED HOLES AS GUIDE .
17.6) FIX THE METAL GLIDE (N) TO PIECE # 20 AND THE METAL GLIDE (M) TO PIECE #22, USING (06)
SCREWS (E) AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED). PAY ATTENTION ON THE DRAWING
AND DETAILS.
17.1)
4x
D
17.3)
D
P
20
D
21
19
22
D
D
17.2)
17.4)
20
19
A
20
23
22
21
A
A
A
23
17.5)
4x
C
C
L
20
C
19
L
C
22
C
17.6)
Correct position of the screws.
M
E
E
E
N
Correct position of the screws.
E
20
M
E
E
23
E
E
E
E
19
N
E
E
E
PAGE 23
STEP 18)
18.1) ATTACH (01) HANDLE (P) TO SIDE PANEL #1, USING (02) SCREWS (L), A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE .
NOTE: THIS HANDLE IS NOT FUNCTIONAL. IT'S JUST A DETAIL
P
L
L
P
L
L
PAGE 24
STEP 19)
19.1) FIX THE HINGES ALREADY ATTACHED TO OPEN SEAT # 8 TO STORAGE BACK PANEL # 7, USING (09)
SCRWES (E) AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED).
19.2) FIX (02) SAFETY HINGE (K), USING (08) SCRWES (K) AND A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED).
NOTE: CAREFULLY PAY ATTENTION ON THE PRE-DRILLES HOLES AND THE CORRECT POSITION ON THE
HINGE. THIS WILL ASSURE THAT HINGE WILL PERFECTLY WORKS.
Q
Q
K
Q
Q
Q
Q
K
Q
Q
Q
Q
2x
K
Q
Q
PAGE 25
HARDWARE PACKAGE COUNT(TABLE)
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE
OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE IDENTIFICATION COLUMN. CALL
CUSTOMER SERVICE IF ANYPARTS ARE MISSING. FOLLOWTHE LETTER IDENTIFICATION WHEN
READING THE ASSEMBLY DRAWING “C”THROUGH “Z”.
HARDWARE IDENTIFICATION
C
F
J
R
S
T
Z
4,5 x 35mm
7 x 70mm
10 x 50mm
4,5 x 50mm
SCREW 1 3/16" LONG
SCREW 2 3/4" LONG
ALLEN WRENCH
WOOD DOWEL 2" LONG
SCREW TAP
SCREW 2" LONG
ADHESIVE FELT
08
04
01
10
04
03
04
IMPORTANT:
PLEASE USEALLTHE HARDWARE MENTIONEDABOVE.
THEYWILLASSURETHE ITEM STABILITYAND SAFETY.
TOOLS REQUIRED
AN ALLEN WRENCH (J) (PROVIDED)AND A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED)
ARE REQUIRED TO ASSEMBLE THIS TABLE. USE A PLASTIC HEAD MALLET TO TAP IN
WOODEN DOWELS. NOTE:A PIECE OF WOOD CAN ALSO BE USED TO KNOCK IN WOODEN DOWELS.
BEFORE YOU BEGIN ASSEMBLY, SELECT AN OPEN SPACE, PREFERABLY ON A CARPET AREA.
IF ASSEMBLING ON A HARD SURFACE, OR ON A WOOD FLOOR, USE BLANKET
TO PREVENT SCRACHING FURNITURE AS WELLAS WOOD FLOOR.
PARTS IDENTIFICATION
24 - LEG (2X)
25 - TABLE TOP
26 - RAIL
27 - CROSSBAR
24
25
26
27
24
PAGE 26
STEP1)
1.1) INSERT (10) WOODEN DOWELS (R) TO LEGS #24 (2X), RAIL # 26 AND CROSSBAR # 27, USING THE PRE
DRILLED HOLES AS GUIDE.
R
26
R
R
2x
27
24
R
R
R
STEP2)
2.1) TO ASSEMBLE TO BASE OF THE TABLE, FIX LEGS # 24(2X) TO RAIL # 26 AND CROSSBAR # 27, USING
(04) SCREWS (F), AN ALLEN WRENCH (J) (PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND
THE PRE DRILLES HOLES AS GUIDE.
2.2) USE THE SCREW CAP (S) TO COVER THE SCREW HEAD.
R
R
F
F
24
26
27
24
4x
F
S
F
F
4x
J
PAGE 27
STEP3)
3.1) FIX THE BASE TO TABLE TOP # 25 USING (08) SCREWS (C ), (03) SCREWS (T), A PHILLIPS HEAD
SCREWDRIVER (NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE .
3.2) TO AVOID SCRATH THE FLOOR, PLEASE ATTACH (04) ADHESIVE FELT (Z) ON TABLE BASE, AS
PER DRAWING BELOW.
Z
Z
4x
Z
Z
C
C
T
C
C
Z
C
T
C
C
8x
C
T
C
25
T
3x
PAGE 28
HARDWARE PACKAGE COUNT(SIMPLE BENCH)
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE
OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE IDENTIFICATION COLUMN. CALL
CUSTOMER SERVICE IF ANYPARTS ARE MISSING. FOLLOWTHE LETTER IDENTIFICATION WHEN
READING THE ASSEMBLY DRAWING “C”THROUGH “Z”.
HARDWARE IDENTIFICATION
C
F
J
R
S
Z
4,5 x 35mm
7 x 70mm
10 x 50mm
SCREW 1 3/16" LONG
SCREW 2 3/4" LONG
ALLEN WRENCH
WOOD DOWEL 2" LONG
SCREW TAP
ADHESIVE FELT
08
02
01
06
02
04
IMPORTANT:
PLEASE USE ALL THE HARDWARE MENTIONED ABOVE.
THEY WILL ASSURE TO THE ITEM STABILITY AND SAFETY.
TOOLS REQUIRED
ANALLEN WRENCH (J) (PROVIDED)AND A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED)
ARE REQUIRED TO ASSEMBLE THIS TABLE. USE A PLASTIC HEAD MALLET TO TAP IN
WOODEN DOWELS. NOTE:APIECE OF WOOD CANALSO BE USEDTO KNOCK IN WOODEN DOWELS.
BEFORE YOU BEGIN ASSEMBLY, SELECT AN OPEN SPACE, PREFERABLY ON A CARPET AREA.
IF ASSEMBLING ON A HARD SURFACE, OR ON A WOOD FLOOR, USE BLANKET
TO PREVENT SCRATCHING FURNITURE AS WELLAS WOOD FLOOR.
PARTS IDENTIFICATION
28 - LEGS (X2)
29 - SEAT
30 -CROSSBAR
31 -CLEAT (2x)
29
28
31
31
30
28
PAGE 29
STEP1)
1.1) INSERT (06) WOODEN DOWELS (R) TO LEGS #28 (2X) AND CROSSBAR # 30, USING THE PRE DRILLED
HOLES AS GUIDE.
2x
R
28
R
30
R
R
STEP2)
2.1) TO ASSEMBLE TO BASE OF THE BENCH, FIX LEGS # 28 (2X) TO CROSSBAR # 30, USING (02) SCREWS
(F), AN ALLEN WRENCH (J) (PROVIDED), THE WOODEN DOWELS ALREADY INSERTED AND THE PRE
DRILLES HOLES AS GUIDE.
2.2) FIX THE CLEATS # 31 (2X) TO SEAT # 29, USING (04) SCREWS (C ), A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE .
C
C
4x4x
C
31
C
F
31
C
29
28
49mm
30
2x
F
J
28
F
PAGE 30
STEP3)
3.1) FIX THE BENCH BASE TO THE SEAT # 29 USING (04) SCREWS (C ), A PHILLIPS HEAD SCREWDRIVER
(NOT PROVIDED) AND THE PRE-DRILLED HOLES AS GUIDE .
3.2) TO AVOID SCRATH THE FLOOR, PLEASE ATTACH (04) ADHESIVE FELT (Z) ON BENCH BASE, AS PER
DRAWING BELOW.
Z
Z
Z
4x
Z
Z
29
C
C
STEP4)
4.1) USE THE SCREW CAP (S) TO COVER THE SCREW HEAD.
C
C
C
4x4x
S
2x
Loading...