ASSEMBLY INSTRUCTIONS
Product Dimension : 30”/48”x30”x30”
Cube Size : 35.8”x 35.8”x6.8”
NW: 44 LBS
GW: 52.8 LBS
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability.
Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment.
NO Description
Qty Sketch
NO
Description
Qty Sketch
Please separate, identify, and count all parts and metal hardware. Compare with the part list to be sure all parts are present. If
hardware is missing or you have difficulty assembling this product, please contact us.
IMPORTANT NOTE:
- Place all wooden
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have the following parts:
Center Piece
T1
B Leg 4
Top
1
T2
Drop Leaves
2
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
3
5
Bolt
(M8x70)
Flat Washer
(Φ8.5x19mm)
Screw
(M4x15)
8 2
8 4
18
Lock washer
( Φ8.5xΦ13mm)
Allen key
(M4mm)
8
1
STEP 1
Attach two drop leaves (T2) to the center piece top (T1) by the hinges with screws (5). Use the screw
driver to tighten the screws (5) as shown below.
Attach the four legs (B) to the center piece top with Bolts (1) and washers (2), (3). Tighten with Allen Key
STEP 2
(4).
Loading...