4
Please call our Toll-Free Customer Service Hotline
Outdoor Furniture
IMPORTANT
If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
PLEASE DO NOT RETURN TO THE RETAILER/STORE
from where you purchased the product.
To expedite any future warranty claims, please retain the instruction sheet, warranty card
and receipt for future use.
Care and Maintenance
Store furniture in an upright position. Be careful to never allow water to build up in frames as this will
cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and
water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a
liquid wax for maximum protection against UV rays and/or salty, damp air. If your set includes cushions,
slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean
water rinse. (Never machine wash cushions, slings or umbrella covers as this will result in shrinkage or
damage). After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer
to tumble dry fabric goods). Do not use bleach or solvents to clean any product! This will void the
warranty.
1
Assembly Instructions
Aluminum Sling Chaise Lounge
Questions, problems, or missing parts?
Before returning to the store, call Customer Service.
Retain this manual for future use.
2
Parts & Tools
PART
QTY
PICTURE & DESCRIPTION
PART
QTY
PICTURE & DESCRIPTION
A
1
Right Arm
AA
12
M6x18 Screw
B
1
Left Arm
BB
4
M6x45 Screw
C
1
Seat Support Frame
CC
16
M6 Flat Washer
D
1
Seat &Back Bucket
DD
16
Cap
E
1
Front Leg
EE
1
Allen Wrench
WARNING: To avoid damage of your
new patio furniture, please use either
the carton or another soft surface such as
carpet as a working surface to prevent
product damage during assembly.
3
Chaise Lounge Assembly
Step 1:
• Attach the seat support frame (C) to the right
arm (A) by lining up the holes on the seat
support frame (C) and right arm (A). Insert
screw M6x18 (AA) through flat washer (CC),
loosely tighten with Allen Wrench (EE). Repeat
for the left arm (B).
Step 2:
• Attach the front leg (E) to the seat&
back bucket (D) by lining up the holes
on the front leg (E) and seat&back
bucket (D). Insert screw M6x18 (AA)
through flat washer (CC), loosely tighten
with Allen Wrench (EE).
Step 3:
• Attach the assembled parts finished on
step 2 to the assembled part finished on
step 1 by lining up the holes, insert screw
M6x45 (BB) through flat washer (CC),
loosely tighten with Allen Wrench (EE).
Once all screws are in place, fully tighten
all screws, put on all caps (DD).
Step 4:
• Turn the chaise lounge right side up on a
flat level surface. Ensure all connections are
secure before use.
Loading...