Torchiere Floor Lamp
BULB SOLD SEPARATELY
148mmL x 210mmD
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE FIRST USE.
Instructions
This lamp must be assembled before use.
Please take a moment to read these instructions
before attempting assembly.
Assembly Instructions
1. Lay out all parts on smooth surface
as shown in illustration.
2. Remove the bushings (I) from the post.
3. Screw the post (B) onto the base (A) and tighten.
4. Screw the post (C) onto the post (B)
and tighten.
5. Screw the post (D) onto the post (C)
and tighten.
6. Screw the post (E) onto the post (D)
and tighten.
7. Screw the cup (F) onto the post (E)
and tighten.
8. Loosen out socket ring (H) from socket.
Fit lamp shade (G) onto socket and tighten with
socket ring (H).
9. Screw one 3-way bulb (not included) into socket.
Plug into outlet and turn on the rotary 3-way switch.
Suitable Bulbs
This fitting accepts bulbs of E26 size to a maximum
rating of 150W, Type-A 3-way light bulb.
H
G
Switch
F
E
I
D
C
B
A
Warranty
LI
MITED ONE YEAR WARRANTY
This limited warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
We warrant this lamp to be free of defects in workmanship and materials for one year from date of purchase (the “Warranty Period”). ALL IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE
DURATION OF THE WARRANTY PERIOD. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you.
This warranty does not cover damage to this lamp resulting from misuse, accident, abuse, transportation, storage, failure to follow our instructions,
modifications, unauthorized repair, normal wear and tear, or any actions or events beyond our reasonable control.
If this lamp does not conform to this limited warranty and, prior to the expiration of the Warranty Period, you may return this lamp to us as provided
below, we will replace this lamp. To receive such replacement, simply mail this lamp to us at the address set forth below, postage paid, and indicate
the reason for the lamp’s return and the address to which the replacement lamp should be shipped. We will pay the cost to ship the replacement
lamp back to you at any location within the lower 48 states of the U.S.A. If the location to which you request that we ship the replacement lamp is
outside of the lower 48 states, we will ship the replacement lamp only after we have invoiced you, and you have paid, for the cost of shipping.
Please include sales receipt with your correspondence. Be sure to wrap your unit securely before mailing!
Note: We make no warranty whatsoever for any incandescent light bulbs, high intensity bulbs or fluorescent tubes supplied with or used with the
lamp. These bulbs and tubes are not manufactured by us. The warranty extends only to the consumer who originally purchased this lamp (“you”).
It does not extend to any subsequent owner or other transferee of this lamp, nor does it extend to any replacement lamp. Because small electrical
appliances do not lend themselves to normal repair procedures, the consumer should not attempt such repairs.
THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES AND OUR ENTIRE LIABILITY FOR ANY BREACH OF THIS LIMITED
WARRANTY. OUR LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE PRODUCT,
NOR SHALL WE BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, SPECIAL, OR PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR
INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Instructions
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE FIRST USE.
To Fit / Change the Bulb
• To fit bulb, screw bulb into lamp holder.
Do not force.
• Before changing a bulb, switch off; disconnect
the plug and let it cool for at least 10 minutes.
Unscrew from the bulb holder.
• Replace it with a bulb of any of the types
recommended.
Instructions For Use and Care
1. Place the lamp on a stable surface in
a dry location.
2. Use the lamp indoors only.
6. Use only E26 bulb of type and rating as
recommended above.
7. To clean the lamp use a clean dry cloth.
Wait 10 minutes after disconnecting to allow
time to cool.
8. The electrical parts can only be serviced by
a qualified tradesman, in compliance with
standards/specifications.
9. If the supply cord is damaged it should be
replaced by the manufacturer or his service
agent or a similar qualified person in order to
avoid a hazard.
3. Keep out of the reach of young children
and pets.
4. To control the lamp, operate the 3-way rotary
switch on the lamp holder.
5. WARNING!
The lamp will get hot in use, avoid contact
with the hot lamp, especially direct contact
with the bulb.
Loading...